Professional Documents
Culture Documents
OBJECTIVES: -
A Responsible position in the industry utilizing and enhancing my ability, skill to work as a team member as well as
independent key player with as sole aim of contributing towards the progress of organization.
JOB PROFILE: -
Design & engineering of static equipment like Pressure Vessels, Reactors, Columns, Heat Exchangers, Bins, Steam
drums & boiler components etc., in compliance with international codes (ASME, NBIC, BS EN, API, TEMA, IBR,
EMMUA-190, WRC, API – 16A, API – 6A adaptors & flanges design) and standards, project specifications, & general
specifications prevalent in Oil & Gas, Fertilizer, Chemicals & other associated industries using PV Elite, Nozzle Pro
& Code Calc.
CARIEER EXPIRENCE: -
NOTABLE PROJECTS:
Approx.
Client Equipment Code of Construction Material
Weight
TECHNIP/BOROUGE, 200 MT
C2R Surge Drum ASME SEC VIII DIV-1 SA 240 304/304L
ADNOC, ABU DHABI
1|Page
Raj Gokul P
4/25, Nehru Street,
Urmelalagian, Ayakudi (PO),
Tenkasi DT.
Tamil Nadu – 627852
E- Mail: rajgokulmail@gmail.com
Mobile: +91 – 8141160511 (India) / +971-554257755 (UAE)
_________________________________________________________________________________________________
II. DESIGN ENGINEER: AL JULAIAH PETROLEUM SERVICES CO. W.L.L, KUWAIT (JAN 2020 TO
APRIL 2023)
NOTABLE PROJECTS:
EQUATE Lean Rich Solvent Exchanger ASME SEC VIII DIV-1 SA-516 Gr 70
Al KOUT International 1st Stage Inter Cooler ASME SEC VIII DIV-1 SA-240 304
Chemi Kuwait Blending Tank ASME SEC VIII DIV-1 SA-240 316L
Chemi Kuwait Gas to Gas Heat Exchanger ASME SEC VIII DIV-1 SA-516 Gr 70
III. ENGINEER-I: STATIC EQUIPMENT DESIGN IN ISGEC HITACHI ZOSEN LIMITED, DAHEJ
GUJARAT, INDIA (APRIL 2015 TO JAN 2019)
NOTABLE PROJECTS:
Approx.
Client Equipment Code of Construction Material
Weight
Aldolization
EIL A/C BPCL ASME SEC VIII DIV-1 SA 516 Gr 70 30 MT
Reactor
2|Page
Raj Gokul P
4/25, Nehru Street,
Urmelalagian, Ayakudi (PO),
Tenkasi DT.
Tamil Nadu – 627852
E- Mail: rajgokulmail@gmail.com
Mobile: +91 – 8141160511 (India) / +971-554257755 (UAE)
_________________________________________________________________________________________________
TOYO A/C ETHYDCO Quench Tower ASME SEC VIII DIV-1 SA 537 CL 1 360 MT
✓ Design of equipment as per ASME section VIII Div-1&2; EN 13445-3 latest edition considering wind loads,
seismic loads, equipment weight, operating pressure condition, Internal Pressure, External Pressure etc.
✓ Design of vessel supports like Skirt support, Leg Support, Lug or Bracket support as per Standard books like
Dennis Moss, Brownell & Young etc., Saddle support as per Standard books and ASME SEC VIII DIV-2.
✓ Design of Stiffening ring for vessels operating under external pressure or vacuum condition using code ASME
section VIII Div-1&2; EN.
✓ Design of Bins with Refractory, Water Jacket, Ceramic Fiber, Triten Lining.
✓ Design of Lifting arrangements like Tailing & lifting Lug support, Trunnion for safe equipment lifting.
✓ Design equipment under Transportation condition.
✓ Preparation of Technical delivery condition (TDC) for all materials like plates, forgings, pipes, flanges, fasteners,
gaskets, tubes etc. as per ASME & EN code requirement and stringent client specifications.
✓ Performing local nozzle load analysis (WRC-107 & 297, PD-5500 Annex. G).
✓ Performing Numerical Analysis using Nozzle PRO for all the process nozzles where nozzles don’t satisfy the
WRC requirements & for large opening nozzles.
✓ Providing necessary design outputs to draftsman for the preparation of GA drawing, Nozzle & Manway detail
drawing, Internal & External attachment drawing, Name plate drawing, Transportation drawing and MR.
✓ Review all the drawings according to the datasheet, codes, specification, client standards and submit to client, AI
& TPI for their review and approval.
✓ Attending KOM (Kick off meetings) & PIM with clients.
✓ Aware about Major Client specifications like Saudi Aramco, Borgue, Shell DEP’s, UOP, Haldor Topsoe, Jacobs,
Toyo, UHDE, Reliance, Technip, EIL, Technimont, SLB, Samsung, Saipem, Linde, Lurgi, Axens, KBR, IOCL,
BPCL, HPCL etc.,
✓ Active positive technical co-operation with the Fabrication team, QA/QC team, Welding team, Projects &
Planning team for job specific technical troubleshooting.
✓ Validation of Design software with ASME latest codes & Addenda.
3|Page
Raj Gokul P
4/25, Nehru Street,
Urmelalagian, Ayakudi (PO),
Tenkasi DT.
Tamil Nadu – 627852
E- Mail: rajgokulmail@gmail.com
Mobile: +91 – 8141160511 (India) / +971-554257755 (UAE)
_________________________________________________________________________________________________
✓ Dealing with ASME Authorized inspector for Review of code calculation and drawings.
✓ Preparation/Review of UDS for Div.2 vessels on behalf of Client as well.
✓ Preparation of MDR for Div.2 vessels.
IV. DESIGN ENGINEER: STATIC EQUIPMENT DESIGN IN TECHNIP INDIA LIMITED, CHENNAI,
TAMIL NADU, INDIA (MARCH 2019 TO JAN 2020) (THIRD PARTY PAY ROLL)
✓ Responsible for all aspects of static equipment selection, design, procurement, installation, commissioning,
and start-up planning. Provide overall static equipment technical leadership and expertise.
✓ Ensures the HURL Project's requirements, as detailed in the Technical Specifications, for all Static equipment
are met. Coordinate with other disciplines of PMT for progressing the design, procurement, manufacture,
erection, commissioning, and start-up of static equipment activities to adhere to project schedule.
✓ Review Piping and Instrumentation Drawings (P&IDs) for safe and operable static equipment features.
Review, comment, and vendors to ensure the work is being executed in accordance with project
specifications, company standards, and regulatory requirements. Includes review of thermal, mechanical
design drawings, calculations, documents, and specifications. Identify deviations if any and manage them as
per project procedures with appropriate approval.
✓ Preparation of MDS, Material requisition, Job Specifications, Scope of Supply, Own standards etc.,
✓ Attending KOM with Vendors
✓ Reviewing Vendor documents i.e., Drawings, Design calculations, FQCP, NDE procedures, Spare list &
vendor data index as per ASME SEC VIII DIV-1 & 2 Latest editions.
✓ Client commented documents study and CRS activity.
EDUCATION: -
1. M.E., Engineering Design (Mechanical) (2013 - 2015) in PSR ENGINEERING COLLEGE with CGPA of 7.1/10
(Company Sponsored)
2. B.E., Mechanical Engineering (2008 - 2012) in PSR ENGINEERING COLLEGE with CGPA of 6.86/10
PG PROJECT:
Contact Analysis and Numerical Modeling of Leakage behavior of Seal in Single Brake Actuators of Heavy vehicles.
4|Page
Raj Gokul P
4/25, Nehru Street,
Urmelalagian, Ayakudi (PO),
Tenkasi DT.
Tamil Nadu – 627852
E- Mail: rajgokulmail@gmail.com
Mobile: +91 – 8141160511 (India) / +971-554257755 (UAE)
_________________________________________________________________________________________________
UG PROJECT:
Mini-Project: “Design and Fabrication of Electrical induction and conventional System in Milling Machine”
PROFESSIONAL CERTIFICATION: -
➢ ANSYS – Ansys Product launcher, Ansys Work bench – Static Structural & Thermal Analysis, Vibration
and Model Analysis, Furnace Temperature Analysis.
➢ Pro/E Wildfire 4.0, 5.0, Creo Parametric 2.0 – Part Modeling, Sheet Metal, Drawing/Drafting, Surface
modeling, Assembly design, Mechanism, Pro/ Mechanica – Structure & Thermal, Cabling, Piping,
Schematic, Skeleton Modeling, Simulate – Structure & Thermal
➢ Unigraphics NX 7, 7.5, 8 - Part Modeling, Sheet Metal, Drawing/Drafting, Surface modeling, Assembly
design
PERSONAL DETAILS: -
Name : Raj Gokul P
Father’s Name : Poovananthan K
Date of Birth : 26 – 11 – 1991
Marital Status : Married
Passport Details : Passport No: T8758871, Date of Expiry: 09/11/2030
Permanent Address : 4-25, Nehru Street, Urmelalagian, Tenkasi (Dt),
Tamil Nadu – 627852
Present Address : 409, SB-4, JAFZA South Accommodation,
Jebel Ali free zone (JAFZA), Dubai, UAE.
Languages known : Tamil, English, Hindi
Reference : Available on request
DECLARATION: -
I hereby declare that all the information provided above is true to my knowledge.
5|Page