Professional Documents
Culture Documents
Manual Tongs
Manual Tongs:
Work Order #: 7664930
Location: AMC YARD, CONROE, TX Type: HT-100
Date: 8/29/2018 Manufacturer: VARCO BJ
Customer: TRINIDAD DRILLING 701 Rated Capacity:
Inspection Category: CAT.IV Serial Number: 191
Customer ID:
Inspected by: Brian Knopik Inspected by: Rafael Ramirez
Types of
Latch Lug Jaw.
Check If Inspected,
or Check N/A if it
does not apply.
Mark Unacceptable
Areas and write
type and severity
of defect.
2679862-4 2560251-7
2680449-1 2560251-9
2665516-3
2665516-4
2626785-4
2626785-5
Check If Inspected, or
Check N/A if it does
not apply.
Mark Unacceptable
Areas and write type
and severity of defect.
Long Jaw:
Latch Jaw:
Short Jaw:
Check If
Inspected, or
Check N/A if it
does not apply.
Mark
Unacceptable
Areas and write Tong Levers:
type and severity
of defect.
Dimension A: Dimension B:
Tong Type Maximum wear. Maximum clearance
between male and female
bosses.
HT 65 0.035” 0.035”
HT 55 0.025” 0.035”
HT 50 0.025” 0.035”
HT 35 0.030” 0.035”
HT 14 0.030” 0.035”
* Compare total wear and clearance with Table above, make a note and report to customer.
List in detail extra comments or any recommendations considered relevant from results:
TRINIDAD DRILLING RIG 701
COMPLETE DISASSEMBLY AND SANDBLAST OF MANUAL TONG PARTS