Professional Documents
Culture Documents
1 -
Electroinstalation:
Design and draw electrical wiring of one floor of a family house or flat.
Building part:
1. Floor plan can be invented or found on the Internet (must contain at least 5 rooms).
2. The drawings in the CAD program (AutoCAD, progeCAD, ...), the download link for the
progeCAD 2014 as well as the activation license are listed in the LMS Moodle.
3. Markers for windows and doors (furniture and room equipment do not draw!) Must be
marked in the floor plan.
4. It is good to distinguish the thickness of the partitions (walls) - the different thickness for
the perimeter and the inner partitions.
5. The ground plan of the house should be one-color (black and white).
6. Choose the appropriate size of the floor plan (not the thumbnail) when drawing.
Electric part:
1. Design and draw at least one drawer and one lighting circuit in the floor plan.
(different circuits distinguish by other line type - do not differentiate color)
4. In least one light switch must be installed in each room with the lamp and two drawers
(classic or double).
5. Each lead shall include a number indication of the number of drivers.
6. An example of the electrical installation is shown below in the figure.
The whole part has to be placed in the frame together with the description box
(frame 5 mm off each side of the paper. Frame thickness: 0.5 mm)
Upload in electronic form (.pdf) using moodle,
The evaluation will take into account the technical aspects of the drawing
Basic electrical installation signs
Marking of drivers:
One-wire line
Two-wire line
Three-wire line
N-wire line
Neutral conductor N
PE protective conductor
PEN conductor
Marking of lamps:
Marking of socket:
double socket
Marking switches:
switch, sorting 1