alarm. 3 保护显示正常,压板投入正常 Protection √ display no alarm. Pressing plate is normal. 4 母线电压、电流显示正常 Basbar voltage √ and current is normal 5 保护室灯光正常无异常声音,The room √ lighting normal, no abnomal sounds 6 检查工作票合格有效Check the PTW of √ the area is qualified 7 检查所有门窗已关好Check all windows & √ doors are closed 8 检查火灾报警盘正常无报警Check the fire √ fighting panel, healthy, running & no alarm 9 温湿度正常 Ambient temperature √ C/humidness 10 过道照明正常,无火灾报警 The corridor & √ stairs lighting are normal, clean, no fire alarm 巡检人签名: Inspector Signature: 状态正常√,状态异常×并做好异常记录。Status (Check when normal fill in ✓ when abnarmol fill in Xand describe the abnormal status on the note chart) Major Electrical Place: ( ) DC power distribution device Date: 专业 电气 地点:()直流配电装置 日期: serial number 1 2 3 4 5 Inspector Remark 序号 巡检人 备注 Inspection Charging DC bus voltage Each switch Are the DC Battery content current(A) (V) position and monitoring device operation 充电电流(A) 直流母线电压 indicator parameters normal/ 蓄电运行 巡检内容 (V) light Is there an alarm? 各开关位置及 直流监控装置参 指示灯 数是否正常/有无 报警 Standard 198-235V normal normal No oxidation, 标准 正常 正常 no leakage 五氧化/无渗 漏