Scribd Logo
Upload

Welcome to Scribd!

  • Inlet CO Analyzer

    Uploaded by

    shahil.ali1985
    4 views1 page
    This calibration record is for a CO analyzer located at the kiln inlet of the preheater. The analyzer measures CO in percentage and is calibrated every 6 months, with an acceptable calibration criteria of ±1.5%. According to the data recorded on May 17, 2022, the analyzer was zeroed and spanned properly, with the next calibration due on November 17, 2022.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This calibration record is for a CO analyzer located at the kiln inlet of the preheater. The analyzer measures CO in percentage and is calibrated every 6 months, with an acceptable calibration criteria of ±1.5%. According to the data recorded on May 17, 2022, the analyzer was zeroed and spanned properly, with the next calibration due on November 17, 2022.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    4 views1 page

    Inlet CO Analyzer

    Uploaded by

    shahil.ali1985
    This calibration record is for a CO analyzer located at the kiln inlet of the preheater. The analyzer measures CO in percentage and is calibrated every 6 months, with an acceptable calibration criteria of ±1.5%. According to the data recorded on May 17, 2022, the analyzer was zeroed and spanned properly, with the next calibration due on November 17, 2022.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    of 1

    Calibration Record

    GAS01ANL01CO

    Kiln Inlet CO Analyzer

    Location Preheater Frequency of Calibration 6 Months

    Measuring Unit % AcceptanceCriteria ±1.5%

    Low Range 0
    High Range 3

    Calibration Data

    Calibration Date 17-May-2022 Next Due date for Calibration 17-Nov-2022

    Before Zero After Zero Before Span After Span

    0.21% 0 0.0274 0.03

    Kamran & Saravanan


    Elect.Engg HOD (E & I)
    Calibrated By Checked By Approved By

    You might also like