This document contains a practice exam for an electrical installation course, assessing knowledge of basic hand tools used in bench work. The exam contains multiple choice and short answer questions testing identification and uses of tools including: safety shoes, hammers, hacksaws, drills, vises, try squares, scribes, combination squares, calipers, files. Short answer questions require listing parts of calipers, types of vises, uses of combination squares, and types of hammers. A bonus question asks to list and explain parts of a file.
This document contains a practice exam for an electrical installation course, assessing knowledge of basic hand tools used in bench work. The exam contains multiple choice and short answer questions testing identification and uses of tools including: safety shoes, hammers, hacksaws, drills, vises, try squares, scribes, combination squares, calipers, files. Short answer questions require listing parts of calipers, types of vises, uses of combination squares, and types of hammers. A bonus question asks to list and explain parts of a file.
This document contains a practice exam for an electrical installation course, assessing knowledge of basic hand tools used in bench work. The exam contains multiple choice and short answer questions testing identification and uses of tools including: safety shoes, hammers, hacksaws, drills, vises, try squares, scribes, combination squares, calipers, files. Short answer questions require listing parts of calipers, types of vises, uses of combination squares, and types of hammers. A bonus question asks to list and explain parts of a file.
Trainee full name………………………………………………………………………………………Trainee ID No…………………………
2016 E.C ARBEGONA TVET COLLEGE BUILDING ELECTRICAL INSTALLATION PERFORM
BENCH WORK EXAM LEVEL 1 LO1 I. Choose the correct answer from the given alternative (2 points each) 1, One of the following has a steel layer inside the soles and protects the carrier from stepping into a turned up nail. A/ Helmet B/ Safety shoes C/ Gloves D/ Goggle 2. Which one of the PPE used to protects the carrier from down falling items and it should be a must for everybody who works or moves on a building site A/ Helmet B/ Goggle C/ Safety shoes D/ Gloves 3.____________is a process used for joining metal parts to form a mechanical or electrical bond. A/ Soldering B/ Bench work C/ Western Union D/ Duplex cross joint 4_________is a clamping device, usually consisting of two jaws that close with a screw or a lever, that is commonly attachable to a workbench and it is used for holding a piece of work firmly. A/ vise B/ Hammer C/ Drilling machine D/ Hacksaw 5. Which one of the following tool used to make holes in metal, wood, or concrete. A/ Grinding machine B/ drilling machine C/ Hacksaw D/ Hammer 6. __________ is used throughout the industry wherever metal must be removed rapidly and finish is of secondary importance. A/ File B/ Vise C/ Electrical knife D/ Hammer 7. One of bench work hand tool used for chipping, fitting, punching and it consists of a heavy iron body with a wooden handle. A/ Hacksaw B/ Vise C/ Chisel D/ Hammer 8_________is used for checking squareness of two surfaces and also used for marking right angle and measuring straightness of surfaces. A/ Tape rule B/ Sprite level C/ Try square D/ Straight edge 9. ________ is made up of height carbon steel and hardened from the front edge and it is used to marking line. A/ Center punch B/ Scriber C/ Combination square D/ Try-square 10. ________ is a precision instrument used for measuring length and diameter and also used for measuring external and internal dimensions. A/ Steel rule B/ Venire caliper C/ Tape rule D/ Try-square II. Write short ansewer (2 points each) 11, List parts of veneer caliper 12, Explain inside and outside caliper 13, Explain at least three types of bench vice 14, What is the use of combination square 15, List at least four types of hammer BONOUS 16, List and explain parts of file (5 points)