You are on page 1of 2

22/02/2024

Dear Muse,

Re: BUILDING CONSENT APPLICATION NO BCO10373954

3 Hutt Road, Manurewa


Please see below our answers to your request for further information:

RFI QUESTION RFI RESPONSE


1 Product literature, specification and appraisals Please refer to attached Product
are omitted. Please provide literature, specification, and appraisals

2 Lot 3 engineer's plans have not been provided. Please refer to attachment
Please provide

3 There appears to be power line over head and The power pole solution is found in the
pole at the front of the site. Please driveway design as per Hugh.
provide further approval and investigation from
Vector to demonstrate that there will Hugh has made sure that there is enough
be adequate clearances between the proposed clearance from pole and driveway.
dwellings and power ling and pole.
4 Provide further evidence for the public sewer Please refer to new civil engineering
and new storm water drain connection to design plans
site eg. EPA or As Built. The current GIS
information does not indicate the location of
connection to the new development.
Once this has been provided. Please ensure new
connections outlet matches EPA.
5 Once WorksOver Approval is received, please Please refer to attachment
forward this to us. We now require this
as part of BC processing.
6 Council has advised that Liquefaction T.B.C
Assessment is required if GIS Map indicates
'Liquefaction Category is Likely or
Undetermined', based on NZBC B1 changes.
This consent requires further referral to
Geotechnical Review from Council. We will
advise once this has been completed
7 Additionally provide geotechnical report for this Please refer to attachment
assessment and for foundation
design.
8 Lot 1 & 3 - Clarify grid M bracing values are Please refer to attachment
less than 15bu/m on external wall does
not demonstrate NZS3604 section 5.4.7.2 eg.
9.8x15 = 148bu/m minimum.
9 Provide handrail to locate height, refer D1/AS1 Please Refer to floor plan A503 and
s. 6.0 section A13
2
10 Please provide valley and ridge details for please Refer to sheet A17
proposed roof.
11 Lot 1 -3 - Clarify correct wall underlay system. Just using building wrap
Section drawing eg. sheet A13 &A14 indicates
Watergate Plus and construction detail indicates
Tekton system.
13 Lot 1 &3 West Elevation - Table 18E given Please refer to attached 2 Storey Clay
from E2/AS1 is not applicable for lower Brick Veneer Construction — Made
window steel lintel supporting brick veneer Easy specification
above. Please specify correct size to
manufacturer's requirement for 2 storey house.
14 Lot 1 - Clarify detail D04 on sheet A25 as Please refer to update detail D04 on
referenced on sheet A06 is not on drawing. sheet A25
Please provide vertical junction detail.
15 Provide barge and eave to wall junction detail please Refer to barge and Eave details on
Double flashing is required. You may sheet A34
refer to BRANZ Build 156 and 165. eg Lot 1&3
South & North Elevation.
16 Demonstrate how the proposed W21 and W18 Please Refer to note on sheet A05 and
window with WC below comply to elevation sheet A08
NZBC F4 section
17 Provide construction fixing detail for the solid Please refer to engineering details on
timber balustrade at the cantilevered sheet S06
end. Details typ.1 glass balustrade detail
18 Provide H1 working method eg. calculation or Please refer to note on sheet A07
schedule method to demonstrate
compliance to NZBCH1.
19 Provide 'Construction R Values' calculation to Please refer to 'Construction R Values'
demonstrate that the proposed calculation attachment
insulation material R values meet the minimum
construction R Values.
20 We have not received Producer Statement from Please refer to attached producer
structural engineer for this statement
application. Please provide./
21 Revise Certificate Design work by designer to Please refer to attached LPB
correct LBP number- BP115858 to
BP115828.
22 Revise Certificate of Design Work to include Please refer to attached LPB
timber mid floor framing also.

Should you have any questions, please contact me.

Kind regards

You might also like