Professional Documents
Culture Documents
Página 1 de 6
Tela anterior
Bem-vindo: ud2nmd
Teste e Ajustes
D11R Track-Type Tractor Hydraulic System
Número de Mídia -RENR7981-07 Data de Publicação -01/01/2015 Data de Atualização -13/01/2015
i03895923
Perform tests with oil temperature below 66 deg c (150 deg f) to prevent
serious burns.
Introduction
Oil for the pilot system comes from the fan pump and from the resolver network.
Required Tools
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 08/03/2020
D11R TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) POWERED BY 35... Página 2 de 6
Illustration 1 g01106077
Tooling (A)
Illustration 2 g02087998
Table 1
Tool Item Part Number Description Qty
Pressure Gauge
A1 8T-0855 1
(0 to 4,000 kPa (0 to 580 psi))
Pressure Gauge
A2 8T-0856 1
(0 to 6,000 kPa (0 to 870 psi))
A3 6V-3989 Fitting 1
A4 6V-4143 Quick Connect Coupler 2
A5 177-7860 Hose As (10 ft) 1
B 198-4240 Digital Pressure Indicator Gp 1
B1 198-4234 Digital Pressure Indicator Gp 1
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 08/03/2020
D11R TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) POWERED BY 35... Página 3 de 6
Machine Preparation
1. Move the machine to a smooth horizontal location.
6. Turn the key to the ON position, but do not start the engine.
8. Move the control levers through the full range of travel several times. This will relieve any
pressure that may be present in the implement hydraulic system.
9. Make sure that the pressure in the entire hydraulic system has been released.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 08/03/2020
D11R TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) POWERED BY 35... Página 4 de 6
Illustration 3 g02100816
Electrohydraulic Valve
12. Install the floorplate. Make sure that the floorplate does not interfere with the hoses for the
test gauge.
4. The pressure should read 3930 ± 170 kPa (570 ± 25 psi) at pressure tap (HPS) .
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 08/03/2020
D11R TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) POWERED BY 35... Página 5 de 6
6. Stop the engine and monitor the pressure at pressure tap (HPS). Turn the key to the ON
position in order to activate the electronic controls.
7. Move the bulldozer control lever from NEUTRAL position to RAISE position and hold for
three seconds. This will drain the pilot pressure in the accumulator.
9. The pressure at pressure tap (HPS) should be 2070 ± 150 kPa (300 ± 20 psi).
Worksheet
Table 2
D11R Pilot System Pressure (Test)and Resolver Network (Test)
Date Equipment ID Code
Item Specification Actual
Engine speed HIGH IDLE
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 08/03/2020
D11R TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) POWERED BY 35... Página 6 de 6
Direitos Autorais 1993 - 2020 Caterpillar Inc. Sun Mar 8 07:59:32 UTC-0300 2020
Todos os Direitos Reservados. ud2nmd
Rede Particular Para Licenciados SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 08/03/2020