Professional Documents
Culture Documents
Practical 7
Aim:- To perform a practical to create a topology and configuration VLAN.
Software Used :-
1. Cisco Packet Tracer (7.2)
2. Ubuntu (22.04) Operating System
Step 1:-
Create topology Take 1 Switch and 1 server and different pc’s then a Create 2 different
networks And connect them with switch and server.
UTU/CGPIT/IT/SEM-5/Computer Networks 1
Enrolment No:-202203103520077 Date:-21/9/2023
Step 2:-
In this step we give Ip address to server and After that in Services section we Start a
DHCP for Ip address configuration in pc.
UTU/CGPIT/IT/SEM-5/Computer Networks 2
Enrolment No:-202203103520077 Date:-21/9/2023
Step 3:-
In this step we create 2 VLAN Networks ‘student’ , ‘faculty’ and there is one default vlan network.
After createing we can see below image 2 active VLAN Networks
After this we Configure both VLAN networks with CLI Commands.
UTU/CGPIT/IT/SEM-5/Computer Networks 3
Enrolment No:-202203103520077 Date:-21/9/2023
UTU/CGPIT/IT/SEM-5/Computer Networks 4
Enrolment No:-202203103520077 Date:-21/9/2023
UTU/CGPIT/IT/SEM-5/Computer Networks 5
Enrolment No:-202203103520077 Date:-21/9/2023
Step 5:-
In this Step we drop a Packet in same Network pc and we can See that pc successfully
Received packet But Network2 pc’s cannot Receive a packet because of a 2 Different VLAN
Networks.
UTU/CGPIT/IT/SEM-5/Computer Networks 6
Enrolment No:-202203103520077 Date:-21/9/2023
UTU/CGPIT/IT/SEM-5/Computer Networks 7
Enrolment No:-202203103520077 Date:-21/9/2023
By doing this Practical I Learn how to Configure VLAN with Different Networks in Computer
UTU/CGPIT/IT/SEM-5/Computer Networks 8