Professional Documents
Culture Documents
1 Asterisks in the type code represent single letter digits, that can
be regionally different. The content of these digits does not
affect efficiency data shown below.
2
Depending on the region the value given here can be different
from values on the drive name plate or manuals.
3
If only fan off value is shown, the unit is not equipped with a
cooling fan
Efficiency and losses related to frequency and torque current
Relative Absolute
Frequency Current Efficiency5
loss4 Loss5
Efficiency %
100
95.6 % 97 % 97.9 %
75
% tnerruc euqroT
50
96.1 % 97.3 % 98.1 %
25
95.8 % 97.5 %
10 30 50 70 90
20 40 60 80 100
Frequency %
Test conditions
Supply voltage: 380-480 V, Supply voltage frequency: 60 Hz, Rated Test Load Stator Frequency: 60 Hz
Data shown are for the CDM (complete drive module) as defined in EU regulation 2019/1781. Losses had been
determined in accordance with IEC 61800-9.
Note:
The watt loss values given here are intended to be used for the determination of power drive system (PDS)
efficiency. They should not be used for the design and selection of drive cooling. For such purposes always refer to
the watt loss data given in technical manuals.
4
Ratio of Absolute-loss to Rated-apparent-power in accordance
with IEC 61800-9-2
5 Measured value