Professional Documents
Culture Documents
Cylindrical PV
Cylindrical PV
Head (semi-sphere)
Thickness (should choose the same thickness with the shell) (mm)
A
B
Maximum allow external pressure (Psi)
Maximum allow external pressure (Mpa)
Test pressure
Testing temperature
Maximum allowable stress at the testing temperature
Maximum allowable stress at the designing temperature
Test pressure
Calculation for cylindrical pressure vessel
10
50
122.65
1
2
840
47.22025
36
17
36
38
38
10.526
23.027
10.526
840
5
2
17.26
19.26
860
1680
1960
43
2.27
13000
403
2.78 Accepetable
20
0.006
8000
372
2.56 Accepetable
212
16496
17789
12.24 Accepetable
for cylindrical pressure vessel
Note
Chọn áp suất thiết kế bằng áp suất đề cho
Lấy 200% của nhiệt độ đề cho
Tra sách thầy Hiếu (PL3 - tùy thuộc vật liệu đã chọn)
Assumption
Tự thiết kế
Dùng 2 giá trị này để tra giá trị A (sách thầy Hiếu PL6.1)
Sử dụng giá trị A ở trên kèm với giá trị E của vật liệu tra sách thầy Hiếu (PL.6.8 nếu là SA-240)
Sử dụng giá trị này kiếm giá trị B trong sách thầy Hiếu (PL6.8 nếu xài SA-240)
8 nếu là SA-240)