Professional Documents
Culture Documents
P/F anodized aluminium work for partitions doors,windows,ventilators with extruded built up standard sections,tubular sections,Z-Sections and other sections of
approved make conforming to IS:1285 fixed with dash fastener of required size and dia incl necessary filling up of gaps at junctions i.e at top/bottom and sides
1 with required EPDM rubber/neoprene gasket Al sections shall be smooth, rust free,straight,mitred and jointed mechanically wherever required incl cleat angles.
(Anodised Powder coated Aluminium)
4 P/F 5mm thick glazing in Al doors,windows,ventilators,shutters & partitions etc with PVC/Neoprene gasket etc c.job
L(ft) W(ft)
sft 2 18.00 30.0 1,080.00
sqm 100.37 847.40 85,055
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen
6 washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2
L(ft)
rft 1 30 30.00
Rm 9.15 679.65 6,216
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel
7
primer all complete.
L(ft) W(ft)
P/F 4" dia MS pipe embedded in cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggregate) 20mm nominal size incl formwork, hold fast and all necessary
8
fittings complete
L(ft)
Rft 6 10 60.00 819.88 49,192.80