You are on page 1of 42

Engineers’ Practical Databook First

Edition. Edition Jay Smith


Visit to download the full and correct content document:
https://textbookfull.com/product/engineers-practical-databook-first-edition-edition-jay-s
mith/
More products digital (pdf, epub, mobi) instant
download maybe you interests ...

Reliability, maintainability and risk. Practical


methods for engineers 9th Edition Smith D.J

https://textbookfull.com/product/reliability-maintainability-and-
risk-practical-methods-for-engineers-9th-edition-smith-d-j/

Reliability Maintainability and Risk Practical Methods


for Engineers David J. Smith (Auth.)

https://textbookfull.com/product/reliability-maintainability-and-
risk-practical-methods-for-engineers-david-j-smith-auth/

Sew Your Own Wardrobe More Than 80 Techniques 1st


Edition Alison Smith

https://textbookfull.com/product/sew-your-own-wardrobe-more-
than-80-techniques-1st-edition-alison-smith/

Statistics for Process Control Engineers A Practical


Approach First Edition Myke King

https://textbookfull.com/product/statistics-for-process-control-
engineers-a-practical-approach-first-edition-myke-king/
Databook of Plasticizers 2nd Edition Wypych

https://textbookfull.com/product/databook-of-plasticizers-2nd-
edition-wypych/

Woman 99 1st Edition Macallister Greer

https://textbookfull.com/product/woman-99-1st-edition-
macallister-greer/

Databook of Nucleating Agents 1st Edition Wypych

https://textbookfull.com/product/databook-of-nucleating-
agents-1st-edition-wypych/

Psychotherapy A Practical Guide 1st Edition Jeffery


Smith (Auth.)

https://textbookfull.com/product/psychotherapy-a-practical-
guide-1st-edition-jeffery-smith-auth/

Human factors in control room design : a practical


guide for project managers and senior engineers First
Edition Crampin

https://textbookfull.com/product/human-factors-in-control-room-
design-a-practical-guide-for-project-managers-and-senior-
engineers-first-edition-crampin/
ENGINEERS’
PRACTICAL DATABOOK
First Edition
ENGINEERS’ PRACTICAL DATABOOK
First Edition in SI Units

This Data Book is provided for the teaching of engineering and conforms to typical teaching structure for
selected modules within HNC, HND, Foundation Degree and Bachelor’s Degree qualifications in
Engineering.

Credit: Material properties derived or calculated from various sources, including Materials Handbook (ASM
Vol.2, 1979), Granta Design (2018), Thermodynamics: An Engineering Approach (Çengel & Boles, 6th ed.,
2007), www.engineeringtoolbox.com (2018), www.matweb.com (2018). Unit Circle Angles by Gustavb is
licenced under CC BY-SA 3.0. Avogadro constant (2018 definition) and atomic elements from IUPAC
(2018). The author accepts no liability for any injuries or damages caused that may result from the reader's
acting upon or using the content contained in the publication. Always consult a professional.

Whilst every care has been taken to include accurate information, the author would appreciate any
corrections to be sent to EngineersDatabook@gmail.com, quoting the serial number (bottom of this page)
and page number of the correction.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise
without either the prior written permission of the author or a licence permitting restricted copying issued
by the aforementioned.

All formulae are written in SI units (m, kg, s) unless otherwise explicitly stated.

Copyright © 2018 Jay Smith


MEng CEng MIMechE
All rights reserved.
S/N: 1.0.01
ISBN: 978-198-061934-5
Brief Contents
Symbols ............................................................................................................ i
Units of Measurement ...................................................................................... ii
Mathematical Constants .................................................................................. iv
Physical Constants ........................................................................................... iv
Conversion Factors............................................................................................ v
1. Mathematics.............................................................................................. 1
2. Materials ................................................................................................. 47
3. Mechanics ............................................................................................... 75
4. Structures ................................................................................................ 85
5. Machines and Mechanisms ....................................................................... 95
6. Electrical and Electronics ........................................................................ 105
7. Thermodynamics.................................................................................... 121
8. Fluid Mechanics ..................................................................................... 131
9. Systems ................................................................................................. 143
10. Project Management .............................................................................. 147
Properties of Water ...................................................................................... 151
Atmosphere.................................................................................................. 152
Contents
1.8. Hyperbolic Functions ..... 18
1.9. Vectors.......................... 19
Notation ........................................... 19
Symbols ....................................... i Vector Multiplication ...................... 20
Units of Measurement .................ii Triple Products ................................ 21
Vector Calculus ................................ 21
Prefixes ....................................... ii 1.10. Matrices ........................ 22
S.I. Units ....................................... ii Notation ........................................... 22
Rotation Matrices ............................ 23
Derived Units................................. iii Screw Matrix .................................... 23
Euler Angles ..................................... 23
Mathematical Constants .............iv Determinant .................................... 24
Eigenvectors and Eigenvalues ........ 24
Physical Constants ......................iv Matrix Inverse.................................. 25
Conversion Factors ......................v 1.11. Calculus......................... 26
Derivatives ....................................... 26
1. Mathematics........................... 1 Integrals ........................................... 26
1.1. Algebra ............................1 Table of Derivatives......................... 27
Laws of Exponents ............................. 1 Surface of Revolution ...................... 28
e (the base of the natural logarithm)1 Volume of Revolution ..................... 28
Laws of Logarithms ............................ 2 Time Average of a Function ............ 28
Polynomials ........................................ 3 1.12. Laplace Transforms ....... 29
Partial Fractions ................................. 4 Table of Laplace Transforms ........... 30
1.2. Sequences and Series........5 1.13. Statistics ....................... 32
Sum of First n Natural Numbers ....... 5 Discrete Random Variables............. 32
Sum of First n Squared Natural Grouped Frequency Distribution ... 32
Numbers ............................................. 5 Linear Regression (Least Squares
Sum of Arithmetic Progression ......... 5 Regression Line) .............................. 33
Sum of Geometric Progression ......... 6 Pearson Product Moment
1.3. Coordinate Systems ..........7 Correlation Coefficient .................... 34
Spearman’s Rank Correlation
1.4. Complex Numbers ............8 Coefficient ........................................ 34
Cartesian Form ................................... 8 Combinatorics.................................. 35
Polar Form .......................................... 8 Binomial Formula ............................ 36
De Moivre’s Theorem ........................ 9 Binomial Distribution ...................... 36
Poisson Distribution ........................ 39
1.5. Power series ................... 10 Normal Distribution ........................ 42
Taylor Series .....................................11
Maclaurin Series ..............................11 2. Materials ...............................47
1.6. Fourier Series ................. 11 2.1. The Elements ................. 47
Fourier Series ...................................12 Periodic Table .................................. 51
1.7. Trigonometry ................. 13 Pure Metallic Solids – Mechanical . 52
Definitions ........................................13 Pure Metallic Solids – Thermal and
Unit Circle Identities ........................13 Electrical ........................................... 54
Unit Circle Angles .............................14 2.2. Steels and Alloys ............ 56
Trigonometric Identities ..................15
Sinusoidal Waveforms .....................16 2.3. Alloys ............................ 59
Expansion of R sin(ωt+θ) .................17
Area of a Triangle .............................17
2.4. Polymers ....................... 63
Law of Sines and Cosines.................17 2.5. Specific Heat Capacity.... 66
2.6. Ashby Charts .................. 67 Kinematics ........................................97
Kinetics........................................... 100
2.7. Composites .................... 70
Classifications................................... 70 5.3. Periodic motion ............ 103
Two-Phase Composites (e.g. Springs (Hooke’s Law) ................... 103
concrete) .......................................... 71 Dampers or Dashpots ................... 103
Fibre-Reinforced Composites ......... 71 Simple Harmonic Motion ............. 103
Short Fibres, Random Orientation . 73 Mass-Spring-Damper .................... 104
Discontinuous and Aligned Fibre Simple Pendulum .......................... 104
Composites ...................................... 73
5.4. Lagrange’s Equation ..... 104
3. Mechanics ............................. 75
6. Electrical and Electronics ..... 105
3.1. Stress-Strain Relationship ..
6.1. Fundamentals of
..................................... 75
Electromagnetism....................... 105
Uniaxial Stress .................................. 76
Ohm’s Law ..................................... 105
Shear ................................................. 76
Resistance ...................................... 105
Triaxial Stress ................................... 77
Inductance ..................................... 105
3.2. Pressure Vessels ............. 79 Capacitance ................................... 106
Cylindrical Vessels ........................... 79 Stored Energy ................................ 106
Spherical Vessels.............................. 80 Reactance ...................................... 106
Complex Impedance ..................... 107
3.3. Mohr’s Circle .................. 81
For Plane Stress ............................... 81 6.2. Transformers................ 108
Principal Stress ................................. 83 Induced EMF in a coil .................... 108
General Three-Dimensional Stress . 84 Ideal Transformers ........................ 108
Yield Criteria ..................................... 84
6.3. Electrical Machines....... 109
4. Structures .............................. 85 Lorentz Force ................................. 109
DC Machines.................................. 109
4.1. Bending of Beams........... 85 AC Machines .................................. 110
Second Moment of Area ................. 85
6.4. AC Power ..................... 111
Radius of Gyration ........................... 85
Single Phase ................................... 111
4.2. The Bending Formula...... 86 Balanced 3-Phase .......................... 111
Plane Sections .................................. 87 Star-delta Conversions ................. 112
Complex Waveforms .................... 112
4.3. Linear Elastic Beams ....... 88
6.5. Electronics.................... 113
4.4. Torsion of Shafts ............ 92 Circuit Diagram Symbols............... 113
Max Shear Stress ............................. 92 Diodes ............................................ 114
Torsional Stiffness ........................... 93 Field Effect Transistors ................. 114
4.5. Euler’s Buckling Criterion 94 Bipolar Junction Transistors ......... 115
Euler Buckling Force ........................ 94 Bipolar Amplifier Configurations . 116
Euler Buckling Stress ....................... 94 Operational Amplifiers ................. 117
Logic Gates .................................... 118
5. Machines and Mechanisms.... 95 Boolean Algebra ............................ 119
Resistor Colour Code Table .......... 120
5.1. Mechanisms ................... 95
Mobility (Gruebler’s Equation) ....... 95 7. Thermodynamics ................. 121
Grashof’s Criterion .......................... 95
7.1. First Law ...................... 121
5.2. Classical Mechanics ........ 96 Internal Energy .............................. 121
Linear Terms .................................... 96
Rotary Terms .................................... 96 7.2. Second Law .................. 122
Derivatives of Linear Position ......... 96 7.3. Ideal Gas Equations ...... 123
Derivatives of Angular Position ...... 96
Ideal Gas Law .................................123 Navier-Stokes Equation................. 138
Combined Gas Law ........................123
Specific Heat Capacities.................124 8.3. Aerodynamics...............139
Lift and Drag Coefficient ............... 139
7.4. Isentropic Processes in Gas Induced Drag Coefficient .............. 139
Turbines ................................... 124 Speed of Sound.............................. 139
Mach Number ................................ 139
7.5. Cycle Efficiency ............. 124 Ram Air Recovery .......................... 140
Ideal Cycle Efficiency .....................125
8.4. Jet Engines ...................141
7.6. Heat Pumps and Propulsive Power........................... 141
Refrigeration .............................. 125 Thrust Specific Fuel Consumption 141
Coefficient of Performance ...........125 Propulsive Efficiency ..................... 141
Thermal Efficiency ......................... 141
7.7. Carnot Cycle ................. 125
Overall Efficiency ........................... 141
7.8. Heat Transfer ............... 126
Sensible Heat..................................126 9. Systems ...............................143
Conduction .....................................126 Transfer Function .......................... 143
Convection......................................126 First Order Systems ....................... 143
Composite Slab or Laminate with Response to a Step Input .............. 143
Fluid Boundaries ............................126 Second Order Systems .................. 144
Solid Expansion ..............................127
Work ...............................................127 10. Project Management .........147
Power ..............................................127
Earned Value Analysis ................... 147
7.9. Flow Equations ............. 128 Performance Indices ..................... 148
Change in Enthalpy ........................128
Steady Flow Energy Equation (open Properties of Water .................151
system) ...........................................128
Atmosphere.............................152
7.10. Diffusion ...................... 129
Fick’s First Law of Diffusion ...........129 International Standard Atmosphere
Fick’s Second Law of Diffusion ......129 (ISA) ................................................ 152
The Arrhenius Equation .................129 Troposphere Model ...................... 152
Standard Atmosphere Table ......... 153
8. Fluid Mechanics ...................131
8.1. Statics .......................... 131
Static Pressure................................131
Buoyancy Force ..............................131
Surface Tension ..............................132

8.2. Dynamics ..................... 133


Stagnation Pressure .......................133
Bernoulli’s Equation.......................133
Mass Continuity .............................133
Dynamic Viscosity ..........................133
Reynolds Number ..........................134
Pipe Friction - D’Arcy’s Formula....134
Laminar Friction Factor .................134
Stokes Drag.....................................134
Pipe Roughness ..............................135
K-Factor of a Pipe Fitting ...............137
Mass Continuity (Control Volume)
.........................................................138
Momentum Continuity (Control
Volume) ..........................................138
i

SYMBOLS
ii Engineers’ Practical Databook

UNITS OF MEASUREMENT
PREFIXES

S.I. UNITS
iii

DERIVED UNITS
iv Engineers’ Practical Databook

MATHEMATICAL CONSTANTS

PHYSICAL CONSTANTS
v

CONVERSION FACTORS
vi Engineers’ Practical Databook
vii
1. MATHEMATICS
1.1. ALGEBRA
Laws of Exponents

e (the base of the natural logarithm)


2 Engineers’ Practical Databook

Laws of Logarithms
𝑖𝑓 𝑁 = 𝑎 𝑥 , 𝑡ℎ𝑒𝑛 𝑥 = log 𝑎 𝑁

𝑥 = 𝑎 𝑦 ⇔ 𝑦 = log 𝑎 𝑥

Exponents and logarithms are inverse functions.

log 1 = log10 1 = 0 LOGARITHM OF 1


log 𝑎 (1) = 0
log 𝑎 (𝑎) = 1 LOGARITHM OF THE BASE

log(𝑥 ∙ 𝑦) = log 𝑥 + log 𝑦 PRODUCT RULE


𝑥
log = log 𝑥 − log 𝑦 QUOTIENT RULE
𝑦
log 𝑥 𝑛 = 𝑛 log 𝑥 POWER RULE
1
log 𝑎 (𝑏) = BASE SWITCH
log 𝑏 (𝑎)
log 𝑏 (𝑥) CHANGE OF BASE
log 𝑎 (𝑥) =
log 𝑏 (𝑎)

ln 𝑥 = log 𝑒 𝑥 NATURAL LOGARITHM


14 Engineers’ Practical Databook

Unit Circle Angles


Another random document with
no related content on Scribd:
The Project Gutenberg eBook of Survey of
London, Volume 05 (of 14), the parish of St.
Giles-in-the-Fields, part 2
This ebook is for the use of anyone anywhere in the United
States and most other parts of the world at no cost and with
almost no restrictions whatsoever. You may copy it, give it away
or re-use it under the terms of the Project Gutenberg License
included with this ebook or online at www.gutenberg.org. If you
are not located in the United States, you will have to check the
laws of the country where you are located before using this
eBook.

Title: Survey of London, Volume 05 (of 14), the parish of St.


Giles-in-the-Fields, part 2

Author: George Laurence Gomme


William Edward Riley

Release date: November 16, 2023 [eBook #72144]

Language: English

Original publication: London: London County Council, 1912

Credits: Richard Tonsing, Bryan Ness, and the Online


Distributed Proofreading Team at https://www.pgdp.net
(This file was produced from images generously made
available by The Internet Archive/Canadian Libraries)

*** START OF THE PROJECT GUTENBERG EBOOK SURVEY OF


LONDON, VOLUME 05 (OF 14), THE PARISH OF ST. GILES-IN-
THE-FIELDS, PART 2 ***
Transcriber’s Note:
New original cover art included with this eBook is
granted to the public domain.
LONDON COUNTY COUNCIL

SURVEY OF LONDON
ISSUED BY THE JOINT PUBLISHING

COMMITTEE REPRESENTING THE LONDON

COUNTY COUNCIL AND THE COMMITTEE

FOR THE SURVEY OF THE MEMORIALS OF

GREATER LONDON

UNDER THE GENERAL EDITORSHIP OF

SIR LAURENCE GOMME (for the Council)

PHILIP NORMAN (for the Survey

Committee)
VOLUME V.

THE PARISH OF ST. GILES-IN-THE-FIELDS

(Part II.)

PUBLISHED BY THE LONDON COUNTY COUNCIL, SPRING


GARDENS, LONDON
1914
THE PARISH OF ST. GILES-IN-THE-FIELDS (PART II.), BEING
THE FIFTH VOLUME OF THE SURVEY OF LONDON, WITH
DRAWINGS, ILLUSTRATIONS AND ARCHITECTURAL
DESCRIPTIONS, BY W. EDWARD RILEY, ARCHITECT TO THE
COUNCIL. EDITED, WITH HISTORICAL NOTES, BY SIR
LAURENCE GOMME, CLERK OF THE COUNCIL.
JOINT PUBLISHING COMMITTEE
REPRESENTING THE LONDON COUNTY
COUNCIL AND THE COMMITTEE FOR THE
SURVEY OF THE MEMORIALS OF GREATER
LONDON.

Chairman.

E. L. MEINERTZHAGEN.

Members appointed by the Council.

GRANVILLE-SMITH, R. W.
JOHNSON, W. C.
MEINERTZHAGEN, E. L.
TAYLOR, ANDREW T.

Members appointed by the Survey Committee.

GODFREY, WALTER H.
LOVELL, PERCY.
NORMAN, PHILIP.
MEMBERS OF THE SURVEY COMMITTEE
DURING THE PERIOD OF THE WORK.

The former Presidents of the Committee were—

The late LORD LEIGHTON, P.R.A.


The late Rt. Hon. and Rt. Rev. Dr. CREIGHTON, LORD
BISHOP OF LONDON.

President.

The Rt. Hon. EARL CURZON OF KEDLESTON, G.C.S.I.,


G.C.I.E., F.R.S.

Honorary Members and Subscribers.

The Rt. Hon. Lord Aberdare.


The Board of Agriculture.
C. E. Allen.
Mrs. J. W. Allen.
Sir Robert Allison.
The Society of Antiquaries.
William Sumner Appleton.
The Architectural Association.
The Society of Architects.
The Royal Institute of British Architects.
The Athenæum.
John Avery.
Samuel P. Avery.
E. Burrell Baggallay.
E. J. Barron.
B. T. Batsford.
Boylston A. Beal.
Henry Forbes Bigelow.
Mrs. Percy Bigland.
Arthur L. Bilham.
Harry W. Birks.
The Birmingham Central Library.
The Bishopsgate Institute.
John Briggs.
E. W. Brooks.
A. Herve Browning.
Alfred Burr.
Mrs. Cadic.
The Worshipful Company of Carpenters.
Miss A. G. E. Carthew.
W. J. Checkley.
Cyril S. Cobb.
E. C. Colquhoun.
The Columbia University Library.
The Constitutional Club.
William W. Cordingley.
The Rt. Hon. Lord Courtney of Penwith, P.C.
Walter Crane.
The Rt. Hon. the Earl Of Crawford, F.S.A.
The Croydon Public Library.
G. J. Crosbie Dawson.
George H. Duckworth.
The Board of Education.
The Rt. Hon. the Earl Ferrers.
Mrs. Charles Fewster.
Owen Fleming.
Mrs. Wickham Flower.
Miss Forbes.
Sir George Frampton, R.A., F.S.A.
Miss Agnes Garrett.
Sir Rickman Godlee.
Goldsmiths’ Library, University of London.
A. Gray, K.C.
Miss I. I. Greaves.
Maj.-Gen. Sir Coleridge Grove, K.C.B.
The Guildhall Library.
Richard Waldon Hale.
Edwin T. Hall, F.R.I.B.A.
Mrs. Henry Hankey.
Ambrose Heal.
David Hills.
S. J. G. Hoare.
R. R. Hodgson.
V. T. Hodgson.
J. J. Holdsworth.
Charles H. Hopwood, F.S.A.
E. J. Horniman.
Miss Huth.
Mrs. Alfred Huth.
Edward Huth.
Douglas Illingworth.
Mrs. Illingworth Illingworth.
Miss Edith F. Inderwick.
The Rt. Hon. the Viscount Iveagh, K.P., G.C.V.O., F.R.S.
Edward Tyrrell Jaques.
Gilbert Jenkins.
Philip M. Johnston, F.R.I.B.A., F.S.A.
Miss Caroline A. Jones.
C. H. F. Kindermann.
C. L. Kingsford.
Sir Hugh Lane.
Miss E. M. Lang.
G. C. Lawson.
Sir W. H. Lever, Bt., M.P.
H. W. Lewer.
Owen C. Little.
The London Library.
Dr. G. B. Longstaff.
Mary, Countess of Lovelace.
W. L. Lucas.
Justin Huntly Mccarthy.
William McGregor.
The Manchester Central Library.
C. O. Masters.
Miss B. A. Meinertzhagen.
The Metropolitan Public Gardens Association.
G. Vaughan Morgan.
John Murray, F.R.I.B.A.
The New York Public Library.
Allan Nickinson.
F. H. Norman.
R. C. Norman.
Mrs. Robert Norman.
The Rev. J. P. Noyes.
Vere L. Oliver.
The Oxford and Cambridge Club.
F. W. Peters.
Mrs. W. Wilton Phipps.
F. W. Platt.
D’Arcy Power, F.R.C.S.
Sir E. J. Poynter, P.R.A., F.S.A.
F. W. Procter.
The Public Record Office.
Mrs. F. L. W. Richardson.
Colin E. Reader.
The Reform Club.
Sir Joseph Savory.
Sion College.
Mrs. Vernon Smith.
A. G. Snelgrove.
W. J. Songhurst.
H. C. Sotheran.
Walter L. Spiers.
F. B. Spooner.
The Rt. Hon. Lord Alexander Thynne.
A. G. Warren.
The Library of Congress, Washington.
Mrs. Westlake.
Mrs. Wharrie.
J. Barrington White.
Miss M. J. Wilde.
Dr. George C. Williamson.
Walter Withall.
John E. Yerbury.
Keith D. Young, F.R.I.B.A.
Active Members.

C. R. Ashbee.
Oswald Barron, F.S.A.
A. H. Blake.
W. W. Braines.
A. E. Bullock, A.R.I.B.A.
G. H. Chettle.
A. W. Clapham, F.S.A.
George Clinch, F.G.S., F.S.A., Scot.
A. O. Collard, F.R.I.B.A.
F. T. Dear.
William Doddington.
H. W. Fincham.
Matt. Garbutt.
Walter H. Godfrey.
Mrs. Ernest Godman.
T. Frank Green, A.R.I.B.A.
Edwin Gunn, A.R.I.B.A.
Osborn C. Hills, F.R.I.B.A.
E. W. Hudson.
T. Gordon Jackson, Licentiate R.I.B.A.
Max Judge.
P. K. Kipps, A.R.I.B.A.
Gilbert H. Lovegrove.
Ernest A. Mann, Licentiate R.I.B.A.
E. T. Marriott, M.A.
Cecil G. McDowell.
W. Monk, R.E.
Sydney Newcombe.
E. C. Nisbet.
Robert Pearsall.
A. Wyatt Papworth, A.R.I.B.A.
Francis W. Reader.
Ernest Railton.
John Ravenshaw.
Francis R. Taylor, Licentiate R.I.B.A.
George Trotman.
Miss E. M. B. Warren.
W. A. Webb, A.R.I.B.A.
A. P. Wire.
W. Wonnacott, A.R.I.B.A.
E. L. Wratten, A.R.I.B.A.
Edward Yates.
W. P. Young.
Philip Norman, F.S.A., LL.D., Editor of the Committee.
E. L. Meinertzhagen, J.P., Treasurer of the Committee.
Percy Lovell, B.A., A.R.I.B.A.,
Secretary of the Committee, 27, Abingdon Street, Westminster,
S.W.
CONTENTS.
PAGE
GENERAL TITLE PAGE i
SPECIAL TITLE PAGE iii
MEMBERS OF THE JOINT PUBLISHING COMMITTEE iv
MEMBERS OF THE SURVEY COMMITTEE v
DESCRIPTION OF THE PLATES ix
PREFACE xv
THE SURVEY OF ST. GILES-IN-THE-FIELDS:—
Boundary of the Parish of St. Giles-in-the-Fields 1
High Holborn, from the Parish Boundary to Little
Turnstile 3
Nos. 3 and 4, Gate Street 10
High Holborn, between Little Turnstile and Kingsway 13
No. 211, High Holborn 16
Smart’s Buildings and Goldsmith Street 18
Nos. 181 and 172, High Holborn 23
Site of Rose Field (Macklin Street, Shelton Street,
Newton Street (part) and Parker Street (part)) 27
No. 18, Parker Street 33
Great Queen Street (general) 34
No. 2, Great Queen Street 38
Nos. 26 to 28, Great Queen Street 40
Nos. 55 and 56, Great Queen Street 42
Freemasons’ Hall 59
Markmasons’ Hall 84
Great Queen Street Chapel 86
Site of Weld House 93
Nos. 6 and 7, Wild Court 98
No. 16, Little Wild Street 99
No. 1, Sardinia Street 100
Site of Lennox House 101
Nos. 24 and 32, Betterton Street 104
No. 25, Endell Street 105
North of Short’s Gardens 106
Site of Marshland (Seven Dials) 112
The Church of All Saints, West Street 115
Site of the Hospital of St. Giles 117
Church of St. Giles-in-the-Fields 127
Nos. 14 to 16, Compton Street 141
Nos. 4, 5, 6, 7, 9, 10 and 11, Denmark Street 142
North of Denmark Place 144
Site of The Rookery 145
Nos. 100, 101 and 102, Great Russell Street 147
Bedford Square (General) 150
No. 1, Bedford Square 152
Nos. 6 and 6A, Bedford Square 154
No. 9, Bedford Square 157
No. 10, Bedford Square 158
No. 11, Bedford Square 161
No. 13, Bedford Square 163
No. 14, Bedford Square 164
No. 15, Bedford Square 165
No. 18, Bedford Square 166
No. 23, Bedford Square 167
No. 25, Bedford Square 168
No. 28, Bedford Square 170
No. 30, Bedford Square 171
No. 31, Bedford Square 172
No. 32, Bedford Square 174
No. 40, Bedford Square 176
No. 41, Bedford Square 177
No. 44, Bedford Square 178
No. 46, Bedford Square 179
No. 47, Bedford Square 180
No. 48, Bedford Square 181
No. 50, Bedford Square 183
No. 51, Bedford Square 184
Nos. 68 and 84, Gower Street 185
North and South Crescents and Alfred Place 186
House in rear of No. 196, Tottenham Court Road 188
INDEX
PLATES Nos. 1 to 107
MAP OF THE PARISH

You might also like