the requirements set by law or the National Building Code. Of course you want to make sure all the proper technical, mechanical, electrical, and structural plans for the construction of the building are met. In addition, if you build a house or a building without a permit from your municipality, construction will be stopped until a permit has been issued or released. You’ll receive a strict notice to apply for a permit. REQUIREMENTS FOR SECURING A BUILDING PERMIT IN THE PHILIPPINES
The following are the requirements for securing a
building permit: 1. Properly filled-up application forms duly signed and sealed by engineers concerned: Building Permit Forms (5 copies) Electrical Permit Forms (3 copies) Sanitary Permit Forms (3 copies) 1. Five (5) complete sets of Detailed Plans 2. For construction of two-storey building: Structural Design Analysis — signed and sealed by Civil Engineer at every page 1. For construction of more than two-storey building: Boring and Plate Load Test Seismic Analysis 1. Proof of Property Photocopy of Transfer Certificate if Title (TCT) Photocopy of tax Declaration of Property-lot (Certified True Copy) — 5 copies Photocopy of Current Tax Receipt (5 copies) 1. If property is not registered under the name of the applicant: Submit 5 copies of any of the following: Contract of Lease Contract of Sale Affidavit of Consent of the Lot Owner for the construction of building/house Deed of Absolute Sale 1. Permit Billboard (0.60 X 0.90 Plywood with the following contents): 2. Bill of Materials and Specification (5 copies) — signed and sealed by an engineer or an architect at every page 3.Locational Clearance 4.Photocopy of PTR # and PRC license of all concerned engineers and architects 5. Clearance from the DPWH if the construction is located along National Highway 6. DOLE Clearance A septic system is a type of OWTS, consisting of a septic tank that collects all the sewage. The sewage separates into a solid (sludge) that settles to the bottom, and a liquid effluent that then flows into a leach field for final treatment by the soil. Sewerage system, network of pipes, pumps, and force mains for the collection of wastewater, or sewage, from a community. Modern sewerage systems fall under two categories: domestic and industrial sewers and storm sewers. Sometimes a combined system provides only one network of pipes, mains, and outfall sewers for all types of sewage and runoff. The preferred system, however, provides one network of sewers for domestic and industrial waste, which is generally treated before discharge, and a separate network for storm runoff, which may be diverted to temporary detention basins or piped directly to a point of disposal in a stream or river. A buried, watertight tank designated and constructed to receive and partially treat raw domestic sanitary wastewater. Heavy solids settle to the bottom of the tank while greases and lighter solids float to the top. The solids stay in the tank while the wastewater is discharged to the drainfield for further treatment and dispersal. The three chamber septic tank will measure 3.1 meters (10 feet) by 1.9 meters (6 feet) and will be 2.1 meters deep (almost 7 feet). The tank will have a concrete slab on the bottom, filled, steel reinforced hollow block walls and a concrete top with clean-out ports. It will be parged with cement fortified with “Sahara” waterproofing additive. Fill the bottom of the pit with at least 6 inches of sand or gravel. This will stabilize the base beneath the septic tank to reduce the possibility of shifting or cracking. Form and pour the floor of the tank first, inserting steel reinforcement to meet or exceed your local codes. During the floor pour, install the vertical steel rebar that will reinforce the tank walls. By inserting the bars into the wet concrete floor, you provide a strong structural connection between the walls and the floor.