Professional Documents
Culture Documents
POWER SYSTEM
ANALYSIS & DESIGN
EE 461 (3-0)
Introduction
2
indicating
204 MW
102 MVR
Note the
1.00 PU
( Analysis)
Diagnostic & Troubleshooting
Topics: Week
1. General introduction, the Bus admittance Matrix ,Branch and Node admittances, 1
Mutually coupled Branches in Y-bus
2. Equivalent admittance Network, Modification of Y-bus; Incidence matrix and Y-bus 2
3. Node Elimination (Gauss elimination & Kron Reduction); Triangular Factorization. 3
4. The Impedance Model and Network calculations, Thevenin’s Theorem and Z-bus; 4
Modification of an existing Z-bus
5. Direct determination of Z-bus, Power Invariant Transformations; mutually coupled 5
branches in Z- bus.
6. Power Flow studies, the Power flow problem, Gauss-Siedel iterative method and 6
algorithm for Power-flow solution
7. Newton Raphson method, NR- algorithm for Power-flow solution 7
8. Power-flow studies in system design and operation, Computer simulations 8
9 Fault Analysis: Three-phase symmetrical fault, Transient in RL series circuits, internal 9
voltages of loaded machines under fault condition
10. Fault calculations using Z-bus equivalent circuits, selection of a circuit breaker, 10,11
Unsymmetrical fault, Symmetrical Components, Sequence network of symmetrical
lines, synchronous machines and Y-Δ Transformers
11. Unsymmetrical Faults on power system; Single line to ground fault, Line to line fault 12
12. Double line to ground fault, open conductor fault. 13
13. Power system stability: The stability problem, Rotor dynamics and swing equation 14
14. Application of swing curve& solution of problems using digital computers, the power- 15
angle equation, Equal-area criterion.
Books & reference material
15
Reference Books:
1. Power System Analysis and design, Glover, 5th Ed.,2012, Cengagae ,
ISBN-13 978-81-315-1635-5
p.u Z
basekV given 2
basekVA
p.u Z new
new
given
base 2
basekVAgiven
kV new
Power system Analysis Ashraf Yahya
Example: The reactance of a Generator designated X” is given
as 0.25 p.u based on the generator’s nameplate rating of 18
KV,500MVA. The base for calculations is 20 kV,100MVA. Calculate X”
on the new base.
32
33