Professional Documents
Culture Documents
MENTOR PRESENTED BY
Sri. SANTANU BATSHAV BHUYAN KAMAL SINGH BISHT
DGM OGPS (S/R) Sr.Engg. (OGPS)
Departments Covered
Procedure:
1 ●
Final cut of 4¼ʺ is given to 5½ʺ casing.
2 ●
Primary seal and ring gasket is placed.
2 ●
Topped up the annulus of 9 ⅝ʺ and 5½ʺ casing and tubing.
3 ●
Pressurised the 5½ʺ casing up to 3000 psi.
4
●
No displacement is observed in the annulus
and no pressure drop is detected in the
recorder chart .Test completed successfully.
WELL KILLING:
REVERSE Pumping the kill fluid down the annulus of the well and
CIRCULATION circulating out through tubing.
X-MASS TREE
Pump
CHECK VALVE
Suction
Tank
RETURN LINE
GROUND
XMT EFFLUENT PIT
Gas Flare OCS
STORAGE TANKS
10K Well Head Isolation Valve
Kill Manifold
Heat Exchanger
Kill Pump
Choke Manifold
Salt Solution/
Mud Tank
Test Separator
INJECTOR
STRIPPER
BOP
REEL
Applications of CTU
Sand Removal
Acidization
Fish Removal
Artificial lift is a technique used to bring oil from the reservoir to the surface
because of decreasing reservoir pressure.
Horsehead
Equalizer and
Equalizer Bearing
Saddle
Briddle wire Bearing Counterweight Balance
Pitman
Arm
Polished Rod
Belt
Wellhead
Setup
Surface Pumping Unit
Wellhead Setup
Polished Rod
Tubing
PLUNGER
Basic Components of
the Sucker Rod Pump TRAVELING VALVE
BARREL TUBE
STANDING VALVE
HOLD DOWN
THANK YOU