Supp Ref Code Item Description Unit Mark Rate Last
Code Up % Updated Trade Heading: O - Labour Rates 0.00 JADUAL KADAR HARGA UPAH BURUH 2002 O001 Labourer (Unskilled) Day 45.00 05/07/2005 O001A Semi-skilled labour Day 70.00 26/04/2011 O001B Skilled labour Day 100.00 26/04/2011 O002 Drainlayer Day 60.00 05/07/2005 O003 Concrete Leveller and Screeder Day 65.00 05/07/2005 O004 Mason Day 65.00 05/07/2005 O005 Bricklayer Day 65.00 05/07/2005 O006 Carpenter and Joiner Day 65.00 05/07/2005 O007 Steel Barbender and Fixer Day 65.00 05/07/2005 O008 Pneumatic Tool Operator Day 65.00 05/07/2005 O009 Fitter Day 70.00 05/07/2005 O010 Welder Day 70.00 05/07/2005 O011 Plumber Day 65.00 05/07/2005 O012 Painter Day 60.00 05/07/2005 O013 Roofer Day 65.00 05/07/2005 O014 Glazier Day 65.00 05/07/2005 O015 Ironworker Day 70.00 05/07/2005 O016 Pavior/Plasterer Day 65.00 05/07/2005 O017 Tile Fixer Day 70.00 05/07/2005 O018 Watchman Day 50.00 05/07/2005 O019 Labour (Skilled) Day 65.00 05/07/2005 O020 Pipelayer Day 60.00 05/07/2005 O021 Fence Fixer Day 60.00 05/07/2005 O022 Labour to erect formwork m2 22.00 26/04/2011 O023 Labour to cut, bend & fix steel bar tonne 550.00 26/04/2011 O024 Labour to cast concrete m3 35.00 26/04/2011 O025 Labour to lay bricks; 115 mm thick m2 8.50 26/04/2011 O026 Labour to install lintol 100m x 100mm m 9.00 26/04/2011 O027 Labour to lay damp proof course, 230mm wide m 0.30 26/04/2011 O028 Labour to lay cement & sand acreed to floor; 25mm thick, steel trowel m2 5.50 26/04/2011 O029 Labour to plaster wall; cement & sand; 28mm thick; 3 coats; external m2 12.50 26/04/2011 Page : 1 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O030 Labour to plaster wall; cement & sand; 28mm thick; 3 coats; internall m2 8.50 26/04/2011 O031 Labour to lay tiles; homogeneous m2 16.00 26/04/2011 O032 Labour to fix corner beading m 2.30 26/04/2011 O033 Labour to install timber door frame for single leaf door including sub-frame no 36.00 26/04/2011 O034 Labour to install timber door frame for double leaf door including sub-frame no 39.00 26/04/2011 O035 Labour to install timber door; single leaf no 50.00 26/04/2011 O036 Labour to install timber door; double leaves no 70.00 26/04/2011 Skilled And General Workers O037 Concretor day 50.00 18/12/2008 O038 Concretor 'Kepala' day 62.00 18/12/2008 O039 Steel bar bender & fixer day 53.00 18/12/2008 O040 Bar bedber 'Kepala' day 66.00 18/12/2008 O041 Formwork carpenter day 54.00 18/12/2008 O042 Formwork carpenter 'Kepala' day 68.00 18/12/2008 O043 Bricklayer day 52.00 18/12/2008 O044 Bricklayer 'Kepala' day 65.00 18/12/2008 O045 Blocklayer day 57.00 18/12/2008 O046 Blocklayer 'Kepala' day 71.00 18/12/2008 O047 Roofer day 55.00 18/12/2008 O048 Roofer 'Kepala' day 71.00 18/12/2008 O049 Joinery carpenter day 57.00 18/12/2008 O050 Joinery carpenter 'Kepala' day 82.00 18/12/2008 O051 Structural steel worker day 65.00 18/12/2008 O052 Structural steel worker 'Kepala' day 94.00 18/12/2008 O053 Welder day 71.00 18/12/2008 O054 Welder 'Kepala' day 101.00 18/12/2008 O055 Plumber day 61.00 18/12/2008 O056 Plumber 'Kepala' day 83.00 18/12/2008 O057 Plasterer day 57.00 18/12/2008 O058 Plasterer 'Kepala' day 75.00 18/12/2008 O059 Tiler day 61.00 18/12/2008 O060 Tiler 'Kepala' day 85.00 18/12/2008 O061 Painter day 55.00 18/12/2008 Page : 2 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O062 Painter 'Kepala' day 70.00 18/12/2008 O063 General worker (Male) day 40.00 18/12/2008 O064 General worker (Female) day 35.00 18/12/2008 Piling OO01 Sheet pile OO01A Handle, pitch and drive O065 FSP 3A, 12m lenght pcs 80.00 16/12/2008 O066 FSP 3A, 9m lenght pcs 70.00 05/11/2008 OO02 Extracting O067 FSP 3A, 12m lenght pcs 70.00 05/11/2008 O068 FSP 3A, 9m lenght pcs 60.00 05/11/2008 OO03 600mm diameter pretensioned spun concrete pile O069 Allow for the provision of all necessary injection piling equipment, plant, tools and ancillary equipment (for the execution of all piling work in this contract) and for their transportation to site handling, assembling, erecting, dismantling and removal on completion of the work for any idle standing time Item 42,250.00 04/03/2009 O070 Allow for moving and handling piling equiment, plant, tools, and ancillary equipment about the site as often and whenever necessary for the execution of the whole piling operation (as covered under this contract) including any excavation and filling required for moving the plant, tools and ancillary equipment from differing places and levels of the site, erection of any staging required and dismantling and removal on completion. Item 9,833.33 04/03/2009 O071 Handle, transport and pitch 600mm Diameter spun pile; 12.00m long No 44.00 04/03/2009 O072 Drive only by injection method 600mm Diameter spun pile; 12.00m long (In No. 766) M 45.67 04/03/2009 O073 12.70mm (overall) Butt weld connection 1884mm girth between edges of mild steel extension head and base cap plates including coated heavily with bituminous compound. No 58.00 04/03/2009 O074 Cut off 600mm diameter pre-tensionedspun concrete pile to be required level and roughen the inner surface to detail. No 59.25 04/03/2009 O075 Allow for Pile Dynamic Analysis (PDA) test and submission of analysis. No 1,700.00 04/03/2009 OO04 500mm diameter prestressed spun concrete pile Page : 3 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O076 Allow for mobilisation of labour, plants and hydraulic hammer piling equipment to site, moving around and demobilisation from site Item 18,000.00 16/12/2008 O077 Handle, sling and pitch initial and extension vertical piles not exceeding 12m long no 64.00 16/12/2008 O078 Handle, sling and pitch initial and extension raked 1:4 piles not exceeding 12m long no 80.00 16/12/2008 O079 Drive vertical pile to the required depth m 45.00 16/12/2008 O080 Drive raked 1:4 piles to the required depth m 60.00 16/12/2008 O081 Fillet weld vertical extension pile joints no 97.50 16/12/2008 O082 Cut off piles to the required level and roughen inner surface of pile no 120.00 16/12/2008 O083 Provide labours, plants, temporary staging, kentledge, testing equipment and load 500mm diameter test pile to 1200KN no 15,000.00 10/12/2008 O084 Subsequent load test no 10,000.00 10/12/2008 OO05 350mm diameter prestressed spun concrete pile O085 Allow for mobilisation of labour, plants and hydraulic hammer piling equipment to site, moving around and demobilisation from site Item 14,666.67 23/12/2008 O086 Handle, transport and pitch initial and extension pile not exceeding 12m long no 33.20 23/12/2008 O087 Drive initial and extension pile to the required depth m 13.93 23/12/2008 O088 Fillet weld pile joint no 36.00 23/12/2008 O089 Cut off pile head, strip concrete and exposed reinforcement to a length of 600mm including bending and binding exposed reinforced rods to the reinforcement in the pile cap no 39.00 23/12/2008 O090 Supply and fix 'concrete plug' no 70.00 23/12/2008 O091 Provide all equipments, hydraulic jack, deflection gauge, kentledge and other related items for initial load testing to a vertical load of 130 ton or 1300KN no 13,333.33 23/12/2008 O092 Subsequent load test no 6,933.33 23/12/2008 OO06 300mm diameter prestressed spun concrete pile O093 Allow for mobilisation of labour, plants and jacked -in piling equipment to site, moving around and demobilisation from site Item 40,000.00 23/12/2008 O094 Handle, transport, pitch and drive initial and extension pile to the required depth m 40.00 23/12/2008 O095 Fillet weld pile joint no 27.67 23/12/2008 O096 Cut off and remove surplus length and strip off pile head, bend back reinforcement for connection no 37.50 23/12/2008 O097 Initial pile test to 1100KN no 14,500.00 23/12/2008 Page : 4 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O098 Subsequent load test no 7,166.67 23/12/2008 O099 PDA test no 1,450.00 23/12/2008 OO07 350 x 350mm R.C Pile O100 Allow for the provision of necessary hydraulic hammer piling equipment, plant and tools and for their transportation to the site, handling, assembling and removal after the completion of operation Item 15,000.00 19/02/2009 O101 Allow for moving and handling piling equipment about the site Item 3,000.00 19/02/2009 O102 Allow for submission of records of all piles Item 3,700.00 19/02/2009 O103 Allow for the provision of necessary testing equipment, plant and tools and for their transportation to the site, handling, assembling and removal after completion including all idling and standing time Item 4,750.00 19/02/2009 O104 Handle, transport, pitch and drive initial and extension pile to the required depth m 16.50 19/02/2009 O105 Fillet weld pile joint no 34.00 19/02/2009 O106 Cut off pile head to required level, strip off concrete to expose reinforcement, bend the pile reinforcement excess length to dispose to Contractor's own dump site no 35.80 19/02/2009 O107 Initial pile test to twice working load of 1500KN no 29,030.00 19/02/2009 O108 Subsequent load test no 18,720.00 19/02/2009 O109 PDA test including preparation of pile head, submission of test report no 960.00 19/02/2009 OO08 300 x 300mm R.C Pile O110 Mobilisation & Demobilisation of hydraulic hammer piling frame and equipment Item 13,666.67 16/12/2008 O111 Moving and handling piling equipment, plant and tools about the site Item 4,000.00 16/12/2008 O112 As built survey Item 4,000.00 16/12/2008 O113 Submission of piling record Item 1,500.00 16/12/2008 O114 Handle, transport and pitch only, 12m long initial/extension pile no 43.00 16/12/2008 O115 Drive only initial/extension pile m 14.50 16/12/2008 O116 Filler weld pile joint no 30.00 16/12/2008 O117 Cut off pile head and cart away surplus length from site no 35.00 16/12/2008 O118 Preliminary load test 2 x 1000KN no 14,166.67 16/12/2008 O119 PDA test no 1,333.33 16/12/2008 OO09 250 250mm R.C Pile Page : 5 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O120 Allow for moving and handling jacked-in piling equipment, plants, tools at the site as often and whenever necessary for the operation of the whole piling operation including for moving the plants, tools and ancillary equipment from different levels of the site and all necessary staging, platform and any idling standing time. no 42,500.00 23/12/2008 O121 Handle, transport, pitch and drive initial and extension pile to the required depth m 29.50 23/12/2008 O122 Fillet weld pile joint no 22.75 23/12/2008 O123 Cut off and remove surplus length and strip off pile head, bend back reinforcement for connection no 29.50 23/12/2008 O124 Initial load test to 660KN no 10,350.00 23/12/2008 O125 Subsequent load test no 8,750.00 23/12/2008 O126 PDA test no 1,187.50 23/12/2008 OO10 200 x 200mm R.C pile O127 Handle, transport and pitch, 6m long initial/extension pile no 9.00 16/12/2008 O128 Drive initial/extension pile to the required depth m 4.50 16/12/2008 O129 Fillet weld pile joint no 8.00 16/12/2008 O130 Cut off pile head and cart away surplus length from site no OO11 150 x 150mm R.C pile O131 Allow for the provision of necessary hydraulic hammer piling equipment, plant and tools and for their transportation to the site, handling, assembling and removal after the completion of operation Item 4,500.00 19/02/2009 O132 Allow for moving and handling piling equipment about the site Item 1,000.00 02/01/2009 O133 Allow for submission of records of all piles Item 2,000.00 02/01/2009 O134 Allow for the provision of necessary testing equipment, plant and tools and for their transportation to the site, handling, assembling and removal after completion including all idling and standing time Item 10,000.00 02/01/2009 O135 Handle, transport, pitch and drive initial and extension pile to the required depth m 4.38 19/02/2009 O136 Fillet weld pile joint no 8.83 19/02/2009 O137 Cut off pile head to required level, strip off concrete to expose reinforcement, bend the pile reinforcement, excess length to dispose to Contractor own dump site no 16.83 19/02/2009 O138 Subsequent load test to twice working load of 400KN no 5,250.00 19/02/2009 Page : 6 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O139 PDA test including preparation of pile head, submission of test report no 958.33 19/02/2009 Concretor O140 Concretor m3 16.00 13/02/2009 O141 Lean Concrete m3 16.00 26/02/2009 OO12 Lean concrete, 50mm thick including necessary trimming base of excavation 03/12/2008 O142 To underside of pile cap, footing, ground beam, apron slab, ground floor slab, trench beam, trench slab, pit slab and the like m2 1.50 17/02/2009 OO13 Reinforced concrete including vibrating and trowelling to a smooth and uniform level in O143 Pile cap, footing, column stump, ground beam, trench beam and lift pit m3 19.00 03/12/2008 O144 Column m3 20.00 03/12/2008 O145 Stiffener and lintol m3 21.00 03/12/2008 O146 Roof beam m3 20.00 03/12/2008 O147 150mm thick ground floor slab and apron slab m3 19.00 03/12/2008 O148 150mm thick suspended floor slab and suspended floor beam m3 19.00 03/12/2008 O149 150mm thick roof slab m3 19.00 03/12/2008 O150 200mm thick wall m3 20.00 03/12/2008 Bar Bender O151 Bar-Bender tonne 330.00 13/02/2009 O152 Fabric BRC m2 1.35 24/10/2008 OO14 Rods, 12mm, 16mm, 20mm, 25mm, 32mm and 40mm diameter O153 In foundation kg 0.33 03/12/2008 O154 In column kg 0.33 03/12/2008 O155 In beam kg 0.33 03/12/2008 O156 In wall kg 0.33 03/12/2008 OO15 Strirrups and Links O157 6mm, 10mm and 12mm diameter kg 0.33 03/12/2008 OO16 BRC Fabric O158 In ground floor slab, apron slab, trench slab, suspended floor slab and roof slab m2 1.30 03/12/2008 Formwork O158A Formwork m2 13.00 13/02/2009 Page : 7 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) OO17 Timber formwork fabrication, fixing and striking not exceeding 3.50m high O159 To sides of pile cap, footing, column stump, ground beam, trench beam and lift pit m2 13.00 03/12/2008 O160 To sides of column and stiffener m2 13.00 03/12/2008 O161 To sides and soffits of suspended floor beam and roof beam m2 13.00 03/12/2008 O162 To sides and soffits of suspended floor slab m2 13.00 03/12/2008 O163 To sloping soffit of staircase m2 13.00 03/12/2008 Precast prestressed hollow core slab, plank and precast beam Installation & Grouting Works OO18 Installation (Labour Only NOT inclusive cranage) O164 Hollow core slabs & planks in thickness 300mm & below m2 3.43 26/02/2009 O165 Hollow core slabs & planks in thickness 300mm & above m2 5.00 26/02/2009 O166 Hollow core slabs & planks in thickness 325mm m2 3.80 26/02/2009 O167 Hollow core slabs & planks in thickness 360mm m2 4.60 26/02/2009 O168 Precast beams, L < 10m no 103.13 26/02/2009 O169 Precast beams, 10m < L < 15m no 178.00 26/02/2009 O170 Precast column, 1 tier in one length no 152.50 26/02/2009 O171 Precast column, 2 tiers in one length no 200.00 26/02/2009 O172 Precast staircase flight no 108.80 26/02/2009 O173 Precast landing slab no 132.00 17/02/2009 O174 Precast wall, 2400 x 1800 x 150mm thick no 100.00 31/12/2008 O175 Precast wall, 2250 x 1800 x 150mm thick no 132.00 26/02/2009 OO19 Grouting Works to Precast System (Labour & Materials) O176 Grouting to beam dowels connection no 52.56 26/02/2009 O177 Grouting to beam & column gap including formwork no 104.99 26/02/2009 O178 Grouting to BSF connection gap including formwork no 102.74 26/02/2009 OO20 Grouting to HCS/Plank shearkey joint (E.mix) to O179 AV5 - 265 m 9.13 26/02/2009 O180 EV4-325 m 14.30 26/02/2009 O181 EV4-460 m 19.60 26/02/2009 O182 Plank 110 m 5.90 17/02/2009 Page : 8 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O183 WV6 - 205 m 5.00 31/12/2008 OO21 Grouting to column base, 50mm in gap in between; column to pile cap & column to column O184 500 x 500mm no 97.90 26/02/2009 O185 450 x 600mm no 100.10 17/02/2009 O186 300 x 700mm no 68.33 26/02/2009 O187 300 x 300mm no 82.50 17/02/2009 OO22 Grouting to column corrugated connection O188 4 dowels (300 x 300) no 138.60 17/02/2009 O189 6 dowels no 156.25 26/02/2009 O190 8 dowels (500 x 500) no 278.30 26/02/2009 OO23 Grouting to column corrugated connection at beam top rebar O191 2 tiers no 55.00 17/02/2009 O192 Grouting to staircase flight no 121.00 17/02/2009 O193 Grouting to landing slab no 121.00 17/02/2009 O194 Grouting to wall no 69.75 26/02/2009 OO24 Associated Works On Site O195 Concrete G30 to topping, 75mm thick m3 310.00 17/02/2009 O196 Concrete G40 to beam infill & beam top m3 340.00 31/12/2008 O197 Concrete G40 to beam-column junction m3 340.00 31/12/2008 O198 Rebar to beam top, span & support kg 3.25 17/02/2009 O199 Rebar to topping, EB/PB kg 3.25 17/02/2009 O200 RD6 mesh to topping, 4.44kg/m2, measure nett, allow lap in rate m2 13.00 17/02/2009 O201 Formwork to underside of hcs at perimeter beam end m 18.00 31/12/2008 O202 Formwork to edge of topping m 18.00 31/12/2008 Bricklayer O203 Bricklayer pcs 0.15 24/10/2008 O204 Hoisting brick pcs 0.02 15/11/2008 OO25 Lay cement and sand brick O205 110mm thick wall m2 8.05 03/12/2008 OO26 Lay clay brick O206 115mm thick wall m2 8.05 03/12/2008 OO27 Lay hollow concrete block Page : 9 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O207 200mm thick wall m2 8.50 13/01/2009 Plasterer O208 External m2 7.53 13/02/2009 O209 Internal m2 6.99 13/02/2009 OO28 Plaster including mortar mixer, wheel barrow and trowelling tools and erection of working platform to a working height of not more than 3.0m high OO29 19mm thick with wood float or sponge finish in two (2) coats O210 Brickwall and concrete surface; externally m2 8.00 04/12/2008 OO30 19mm thick with steel trowelled finish in two (2) coats O211 Brickwall and concrete surface; internally m2 7.00 04/12/2008 Door O212 Lintol Small no 5.00 27/11/2008 O213 Lintol Big no 15.00 27/11/2008 O214 Lintol Arch no 100.00 27/11/2008 OO31 Timber/Metal Frame O215 Door Frame, SL no 10.00 24/10/2008 O216 Door Frame, DL no 15.00 24/10/2008 OO32 Timber window frame fixing O217 Overall size 300mm x 300mm high no 10.00 04/12/2008 O218 Overall size 1200mm x 1200mm high no 13.00 04/12/2008 OO33 Timber door frame fixing O219 Overall size 900mm x 2100mm high no 13.00 04/12/2008 O220 Overall size 1800mm x 2100mm high no 19.00 04/12/2008 OO34 Metal door frame fixing O221 Overall size 900mm x 2100mm high no 13.00 04/12/2008 O222 Overall size 1800mm x 2100mm high no 19.00 04/12/2008 OO35 Timber Leaf Including Ironmongery O223 Door Leaf including ironmongery, SL no 15.00 24/10/2008 O224 Door Leaf including ironmongery, DL no 30.00 24/10/2008 OO36 Fire Leaf Including Ironmongery O225 Door Leaf including ironmongery, SL no 40.00 24/10/2008 O226 Door Leaf including ironmongery, DL no 80.00 24/10/2008 Page : 10 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) OO37 Partition Leaf Including Ironmongery O227 Door Leaf including ironmongery, SL no 10.00 24/10/2008 O228 Door Leaf including ironmongery, DL no 20.00 24/10/2008 OO38 PVC Leaf O229 Door Leaf, SL no 7.00 27/11/2008 OO39 Timber hollow core door fixing with hinges and normal/standard lockset O230 Standard hollow core flush door faced both sides with plywood; overall size 900mm x 2100mm high x 40mm thick no 17.00 04/12/2008 O231 Standard double leaf hollow core flush door faced both sides with plywood; overall size 1800mm x 2100mm high x 40mm thick pair 28.00 04/12/2008 OO40 Timber solid core door fixing with hinges and normal/standard lockset O232 Standard solid core flush door faced both sides with plywood; overall size 900mm x 2100mm high x 42mm thick no 30.00 04/12/2008 O233 Standard double leaf solid core flush door faced both sides with plywood; overall size 1800mm x 2100mm high x 42mm thick pair 54.00 04/12/2008 OO41 Timber fire door fixing with hinges and normal/standard lockset O234 Standard one (1) hour fire-rated door; overall size 1070mm x 2100mm high x 50mm thick no 42.00 04/12/2008 O235 Standard double leaf one (1) hour fire-rated door; overall size 1800mm x 2100mm high x 50mm thick pair 74.00 04/12/2008 OO42 Ironmongery fixing O236 Door closer no 9.00 04/12/2008 O237 Lockset no 5.00 18/02/2009 Pavior OO43 Mason O238 Rendering, 25mm thick m2 5.38 13/02/2009 O239 Rendering, 50mm thick m2 5.92 13/02/2009 OO44 To floor O240 25mm thick cement and sand render with steel trowelled finish to a smooth and level surface m2 5.40 04/12/2008 O241 20mm thick cement and sand base screed with steel trowelled finish to a smooth and level surface to receive finishing m2 5.40 04/12/2008 Tiling Page : 11 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) OO45 Wall tile including preparation and laying of cement and sand backing screed OO46 To wall O242 200mm x 200mm ceramic tile m2 17.00 04/12/2008 O243 450mm x 450mm granite slab m2 54.00 04/12/2008 O244 450mm x 450mm marble slab m2 43.00 04/12/2008 OO47 Floor tile including preparation and laying of cement and sand backing screed OO48 To floor O245 300mm x 300mm ceramic tile m2 17.00 04/12/2008 O246 300mm x 300mm homogeneous tile m2 17.50 04/12/2008 O247 600mm x 600mm granite slab m2 48.00 04/12/2008 O248 600mm x 600mm marble slab m2 43.00 04/12/2008 OO49 Wall & Floor Finishes O249 Power float m2 3.60 24/10/2008 O250 Wall tile m2 17.22 06/01/2009 O251 Floor tile m2 17.76 06/01/2009 O252 Skirting m 5.25 06/01/2009 O253 Wall tile menara TM Melaka m2 34.43 24/10/2008 O254 Floor tile Menara TM Melaka m2 34.43 24/10/2008 O255 Floor tile skirting Menara TM Melaka m 2.40 24/10/2008 O256 Carpet tile m2 9.70 26/11/2008 O257 Carpet roll m2 14.00 26/11/2008 Roofer OO50 Structural steelwork fabrication, erection and fixing including cranage OO51 Heavy section O258 Universal beam and universal column kg 0.90 04/12/2008 OO52 Hollow section O259 Square, rectangular and circular hollow sections kg 1.00 04/12/2008 OO53 Attached connection O260 Cleats, stiffeners and plates and the like kg 0.90 04/12/2008 OO54 Roof truss O261 Up to 10.0m span kg 0.90 04/12/2008 O262 Above 10.0m span kg 0.90 04/12/2008 OO55 Roofer Page : 12 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O263 Lay aluminium foil m2 2.38 29/10/2008 O264 Lay chicken wire netting m2 1.81 26/04/2008 O265 Fix fascia board m 6.29 26/04/2008 O266 Fix valley gutter m 5.58 18/02/2009 O267 Lay concrete roof tile pc 0.50 24/10/2008 O268 Lay concrete roof tile to pitch not exceeding 30 degree m2 6.00 03/12/2008 O269 Lay metal deck to pitch not exceeding 30 degree m2 5.00 03/12/2008 O270 Lay 50mm thick fibre wool insulation & wire mesh netting to slope m2 1.50 03/12/2008 O271 Lay sisalation to slope m2 1.00 03/12/2008 Ceiling Installer O272 Ceiling board and frame m2 6.50 13/02/2009 O273 Skim coat m2 2.00 24/10/2008 OO56 Ceiling framing & finishing fixing non-suspended ceiling O274 1200mm x 600mm x 3.2mm thick ceiling board m2 6.00 04/12/2008 O275 1200mm x 600mm x 4.5mm thick ceiling board m2 6.50 04/12/2008 Sanitary O276 Squatting w.c complete set no 52.50 02/01/2009 O277 Closed coupled sitting w.c complete set no 52.50 02/01/2009 O278 Table top wash basin complete set no 42.50 02/01/2009 O279 Wall hung handicap wash basin complete set no 45.00 24/12/2008 O280 Sink no 40.00 02/01/2009 O281 Urinal no 50.00 02/01/2009 O282 Wall mounted pillar tap no 15.00 24/12/2008 O283 Hand bidet with flexible hose complete set no 20.00 24/12/2008 O284 Surface mounted stainless steel paper holder no 15.00 24/12/2008 O285 Stainless steel vertical liquid soap dispenser complete set no 25.00 24/12/2008 O286 Single robe hook with door stopper no 15.00 24/12/2008 O287 Stainless steel floor trap complete with insect cage, size 150mm x 150mm no 10.00 24/12/2008 O288 40mm diameter stainless steel grab rail for OKU no 35.00 24/12/2008 Page : 13 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O289 On completion of the installation of sanitary fittings, test all fittings, make good any defects and leave in perfect working order to the entire satisfaction of the Architect Item 500.00 24/12/2008 WATER TANK OO57 Approved FRP water storage tank square type as described complete with cover and all necessary fixing accessories O290 3520 Gallons; Ditto; overall size 4000mm x 2000mm x 2000mm high approximately 20m above ground level No 400.00 02/03/2009 O291 2200 Gallons; Ditto; overall size 5000mm x 2000mm x 1000mm high approximately 600mm above ground level No 340.00 02/03/2009 Scaffolder O292 Erect frame including cross braces, base plate and joint pin frame 6.00 27/11/2008 O293 Dismantle frame, cross braces, base plate & joint pin including stacking up properly directed on site frame 3.00 27/11/2008 O294 Fix 6.0m g.i pipe bracing including all accessories and coupler no 6.00 27/11/2008 O295 Dismantle 6.0m g.i pipe bracing & accessories and coupler including stacking up properly as directed on site no 4.00 27/11/2008 O296 Fix 3.0m g.i pipe bracing including all accessories and coupler no 3.00 27/11/2008 O297 Dismantle 3.0m g.i pipe bracing & accessories and coupler including stacking up properly as directed on site no 2.00 27/11/2008 O298 Fix wall tie including drilling hole for anchor bolt (bolt by Main Contractor) no 4.00 27/11/2008 O299 Dismantle wall tie including making good bolt hole no 2.00 27/11/2008 O300 Fix netting size 6'0"x17'0" including tying in position by wires pc 10.00 27/11/2008 O301 Dismantle netting including rolling up properly and return to store as directed pc 6.00 27/11/2008 Drainage OO58 Surface Water O302 Concrete base & P.C half round drain m 18.00 27/11/2008 O303 230mm thick brickwall & plastering m2 23.50 27/11/2008 O304 R.C Strut no 10.00 27/11/2008 O305 Brickwall sump including R.C base no 150.00 27/11/2008 Page : 14 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15 Name : PCK1 Price List Supp Ref Code Item Description Unit Mark Rate Last Code Up % Updated Trade Heading: O - Labour Rates (Continued) O306 600mm diameter pipe culvert m 75.00 27/11/2008 O307 225mm SGW pipe no 5.00 27/11/2008 O308 Precast road kerb no 5.00 27/11/2008 OO59 Rain Water Down Pipe O309 100mm diameter m 10.66 23/12/2008 O310 150mm diameter m 10.66 23/12/2008 OO60 Gutter O311 Galvanised iron m 18.05 23/12/2008 Road furniture O312 Install single beam highway guardrail m 8.50 10/12/2008 Page : 15 CHEW FU KEONG Date of Printing: 21/Jul/11 Global Estimating System (32 Bit) - H of 15