Professional Documents
Culture Documents
1
Company: Page: 1
Specifier: Project: group 1
Address: Fastening Point:
Phone I Fax: -|- Date: 2016-03-03
E-Mail:
Specifier's comments:
1. Input data
Anchor type and size: HDA-P, M20x250/100
Effective embedment depth: h ef = 250 mm
Material: 8.8
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.us PROFIS Anchor 2.6.1
Company: Page: 2
Specifier: Project: group 1
Address: Fastening Point:
Phone I Fax: -|- Date: 2016-03-03
E-Mail:
5. Details
all N c [kN] all V c [kN] all N s [kN] all V s all M [kNm] Nres [kN] Vres [kN]
68.000 33.184 82.937 - 0.519 47.983 23.416
6. Warnings
Refer to the manufacturer's product literature for cleaning and installation instructions.
Load re-distributions on the anchors due to elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be
sufficiently stiff, in order not to be deformed when subjected to the loading!
Input data and results must be checked for agreement with the
existing conditions and for plausibility!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.us PROFIS Anchor 2.6.1
Company: Page: 3
Specifier: Project: group 1
Address: Fastening Point:
Phone I Fax: -|- Date: 2016-03-03
E-Mail:
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.us PROFIS Anchor 2.6.1
Company: Page: 4
Specifier: Project: group 1
Address: Fastening Point:
Phone I Fax: -|- Date: 2016-03-03
E-Mail:
7. Installation data
Baseplate, steel: - Anchor type and size: HDA-P, M20x250/100
Profile: S shape (AISC), 76 mm x 59 mm x 4 mm x 7 mm Installation torque: 0.300 kNm
Hole diameter in the fixture: df = 22 mm Hole diameter in the base material: 37 mm
Plate thickness (input): 16 mm Hole depth in the base material: 266 mm
Recommended plate thickness: not calculated Minimum thickness of the base material: 381 mm
50.0
3 4
175.0
x
175.0
50.0
1 2
50.0 50.0
175.0 175.0
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.us PROFIS Anchor 2.6.1
Company: Page: 5
Specifier: Project: group 1
Address: Fastening Point:
Phone I Fax: -|- Date: 2016-03-03
E-Mail:
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan