ENQUIRY NO: Part Name: PAGE : 1 OF CUSTOMER: Part No: DATE: SR. NO. Feasibility Concerned YES NO REMARKS 1 Is the design a new concept to the company?
2 Are new materials used in this product?
Are new type of tooling needed for producing this
3 product? Are all special charecterstics identified in the 4 drawing?
5 Is AGRO ENGINEERING WORKS drawing required?
Are any new standard /test specification required
6 from customer /supplier? Following are some standard:-
a Customer specific requirements
b Customer Standard
C Material Standard
d Weld Test Specification
Are additional resource (both people and
7 equipment) needed for this design or additional training required?
Do we need to develop special test equipment ?
8 Do we require customer approval for this equipments?
9 Any other servicebility requirements?
Are degisn changes pending from customer at the
10 custmer end?
11 Is prototype parts needed?
12 Any other specific requirement?
Have e faced quality /warrenty problems in
13 similler products ? Is the components/assy secsitive to customer 's 14 plant process or assy? Are unique in process and final inspection gauge 15 required ? Can we develop these?
Will any new or existing prcesses which are
16 generating special charecterstics controlled by control charts? AGRO ENGINEERING WORKS
FEASIBILITY STUDY AND RISK ASSESMENT
ENQUIRY NO: Part Name: PAGE : 1 OF CUSTOMER: Part No: DATE: SR. NO. Feasibility Concerned YES NO REMARKS Are current processes which are generating 17 special charecterstics contoller by controlled charts?
If yes to above question , is the capability value
18 Cpk>=1.33? Are any special characterstics generated at the 19 subcontractor end?
If yes, to above question , have you visited them
20 and inform them about the quality requirements of the capability indices and ppap documents?
Do we require any approval on the drwings or
22 specific from the customer? Is there any new tooling require fro making this 23 product? Is the lead time for tool making sufficient for the launch?
24 Can 100% delivery requirements to be meet?
25 Are all supplier identified for this new product/
Is there any new product tecknology or process
26 require for the selected suppliers? Do select suppliers have delivery issue on current 27 product? Are proto type sources diffrnt from the regular 28 production sources ? Are there custmer approved sub contracts neede 29 for this products?
30 Is this a new product for the subcontracts?
Are there any safety ergonomics or environmental
31 concerns ? Is the shop space currently availble for making this 32 product? Does the floor layout unable smooth material flow 33 to avoid mix up and unnecessary travel?
34 Is returnable packing Required by customer ?
Conclusion
1 CFT Members :
2 Projects feasible: YES NO
AGRO ENGINEERING WORKS
FEASIBILITY STUDY AND RISK ASSESMENT
ENQUIRY NO: Part Name: PAGE : 1 OF CUSTOMER: Part No: DATE: SR. NO. Feasibility Concerned YES NO REMARKS