Professional Documents
Culture Documents
2007 2009
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
Impacts : √√ No Yes
i. C < 0.20%
ii. Ceq = C + Mn/6 + (Cr+Mo+V)/5 +(Cu+Ni)/15<0.43% (max)
Hardness (Max) No Yes BHN Other (by laddle analysis)
Page 1 of 14
PT. SANGGAR SARANA BAJA
2007 2009
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
Impacts : √√ No Yes
i. C < 0.20%
ii. Ceq = C + Mn/6 + (Cr+Mo+V)/5 +(Cu+Ni)/15<0.43%
Hardness (Max) No Yes BHN Other (by laddle analysis)
Page 2 of 14
PT. SANGGAR SARANA BAJA
2007 2009
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
√√ as per ASME II A
Heat Treatment No √√ Yes Per spec. As Rolled Norm. YES
Impacts : √√ No Yes
i. C < 0.20%
ii. Ceq = C + Mn/6 + (Cr+Mo+V)/5 +(Cu+Ni)/15<0.43%
(by laddle analysis)
Additional Requirements
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Original country of material exclude: China & India
- Comply NACE MR-0175
- Intentional additions of the micro alloying elements vanadium (V), titanium (Ti), niobium (Nb) and boron (B) are
prohibited. MTCs shall include reporting of the appropriate unspecified elements. The concentration of the tramp
elements in carbon steel shall be limited to (heat analysis)
V: 0.02 % max Nb: 0.01 % max
Page 3 of 14
PT. SANGGAR SARANA BAJA
Form No. ENG-PMS-017, Rev.0
2007 2009
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
√√ as per ASME II A
Heat Treatment No Yes Per spec. As Rolled Norm. YES
(P=Prefferd , A= Alternate ) Q&T N&T Anneal Other
Tempering Temperature(min.) time (mm)
Impacts : √√ No Yes
√ as per ASME II A
HIC Testing : Yes Per Nace Acceptance Criteria
√√ No
Page 4 of 14
MATERIAL. Plate / Pipe / Profile IDENTIFICATION
SA-234 WPB N
A.10.1111 OFFICE
REFERENCE NO.
Construction Code : ASME Section…VIII.Div 1, 2007 Ed + '09
(U STAMP) REVISION 04
INTENDED FOR : FITTING Made By Appr'd By Made By Appr'd By
EDISON BUJANG. A EDISON BUJANG. A
Date Date Date Date
BOM ITEM NO. : 14.8.10 14.8.10 29.10.10 29.10.10
Additional Requirements
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Original country of material exclude: China & India
- Comply NACE MR-0175
- Intentional additions of the micro alloying elements vanadium (V), titanium (Ti), niobium (Nb) and boron (B) are
prohibited.
MTCs shall include reporting of the appropriate unspecified elements. The concentration of the tramp elements in
carbon steel shall be limited to (heat analysis)
V: 0.02 % max
Nb + V: 0.020 % max
Page 5 of 14
PT. SANGGAR SARANA BAJA
2007 2009
Material Standard Code √ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
√√ as per ASME II A
Heat Treatment No Yes Per spec. As Rolled Norm. YES
(P=Prefferd , A= Alternate ) Q&T N&T Anneal Other
Tempering Temperature(min.) time (mm)
Impacts : No √√ Yes
Page 6 of 14
MATERIAL. Plate / Pipe / Profile IDENTIFICATION
SA-333 GR.6 N
A.10.1111 OFFICE
REFERENCE NO.
Construction Code : ASME Section…VIII.Div 1, 2007 Ed + '09
(U STAMP) REVISION 04
INTENDED FOR : PIPE Made By Appr'd By Made By Appr'd By
EDISON BUJANG. A EDISON BUJANG. A
Date Date Date Date
BOM ITEM NO. : 14.8.10 14.8.10 29.10.10 29.10.10
Additional Requirements
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Original country of material exclude: China & India
- Comply NACE MR-0175
- Intentional additions of the micro alloying elements vanadium (V), titanium (Ti), niobium (Nb) and boron (B) are
prohibited.
MTCs shall include reporting of the appropriate unspecified elements. The concentration of the tramp elements in
carbon steel shall be limited to (heat analysis)
V: 0.02 % max
Nb + V: 0.020 % max
Page 7 of 14
PT. SANGGAR SARANA BAJA
Form No. ENG-PMS-017, Rev.0
2007 2009
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
Impacts : √ No Yes
i. C < 0.20%
ii. Ceq = C + Mn/6 + (Cr+Mo+V)/5 +(Cu+Ni)/15<0.43% (max)
Hardness (Max) No Yes BHN Other (by laddle analysis)
Page 8 of 14
PT. SANGGAR SARANA BAJA
2007 2009
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
Impacts : √ No Yes
i. C < 0.20%
ii. Ceq = C + Mn/6 + (Cr+Mo+V)/5 +(Cu+Ni)/15<0.43% (max)
Hardness (Max) No Yes BHN Other (by laddle analysis)
√ as per ASME II A
√ No
Page 9 of 14
PT. SANGGAR SARANA BAJA
2007 2008
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
√√ as per ASME II A
Heat Treatment No √ Yes Per spec. As Rolled Norm.
Impacts : √√ No Yes
i. C < 0.23%
ii. Ceq = C + Mn/6 + (Cr+Mo+V)/5 +(Cu+Ni)/15<0.43%
(by laddle analysis)
√ as per ASME II A
√ as per ASME II A
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Any country rectriction are China & india
Page 1
PT. SANGGAR SARANA BAJA
2007 2008
Material Standard Code √√ ASME : Section II Part A& D Edition Addenda
AWWA
API Standard
√√ as per ASME II A
Heat Treatment √√ No Yes Per spec. As Rolled Norm.
Impacts : √ No Yes
√ as per ASME II A
Additional Requirements
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Materials shall be suppliers from Western Europe, Japan, South Korea and USA
- All materials shall be provided with PMI certificate
Page 1
PT. SANGGAR SARANA BAJA
2007 2008
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
√√ as per ASME II A
Heat Treatment No Yes Per spec. As Rolled Norm.
(P=Prefferd , A= Alternate ) Q&T N&T Anneal Other
Tempering Temperature(min.) time (mm)
Impacts : √ No Yes
√√ as per ASME II A
√√ as per ASME II A
HIC Testing : Yes Per Nace Acceptance Criteria
√√ No
Additional Requirements
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Materials shall be suppliers from Western Europe, Japan, South Korea and USA
- All materials shall be provided with PMI certificate
Page 1
PT. SANGGAR SARANA BAJA
2007 2008
Material Standard Code √√ ASME : Section II Part A&D Edition Addenda
AWWA
API Standard
Impacts : √√ No Yes
Additional Requirements
- All materials shall be provided with inspection certificates in accordance with EN 10204:2004 type 3.1
- Materials shall be suppliers from Western Europe, Japan, South Korea and USA
- All materials shall be provided with PMI certificate
Page 1