Mode of Assessment Training Activity/ Staff Tools and Venue and Training Method Requirements Task Equipment Time Turn Work Piece (Intermediate) LO1 1. Using Internship Mr. Lathe J. E Direct Septe Determine job Cutting Shadowing Bernabe Machine Machine Observation mber requirements tools for Apprentices M. 10’” swing Shop Oral 5-15 facing hip Lavitad Complete Questioning operation Learnership with: Demonstrati for nut Mr. (1 unit on Melvin each A. Egia machine ) 3-jaw chucks 4-jaw chucks
Date Developed: Document No.
September, 2018 MACHINING NC II Developed by: Page 1 of 3
Harley Mikkell L. Lagsa
LO2 1. Mounting Face Setup workpiece Plates workpiece 2. Appliying 1 set lathe instrument dogs /equipmen Revolving t on setting Centers up Drill operation Chucks 3. Using Dead personal Centers protective 1 Set device Boring LO3 1. Using Bars Perform lathe Follower turning accessories rest operations. 2. Performing Steady lathe Rest operation Tool for nut Holders: LO4 1. Using Facing, Check/Measur micromete Straight, e workpiece r to RH,LH measuring Parting- the length Off and deep Surface of the nut Gage Safety Date Developed: Document No. September, 2018 MACHINING NC II Developed by: Page 2 of 3
Harley Mikkell L. Lagsa
Shield Safety Goggle
Date Developed: Document No.
September, 2018 MACHINING NC II Developed by: Page 3 of 3