Professional Documents
Culture Documents
Additional Modifying Commands: 1. Start Revit 2018
Additional Modifying Commands: 1. Start Revit 2018
Exercise 5-2
1. Start Revit 2018
6. Click the upper horizontal wall. Drag the blue filled circle to the right a little bit.
Click the rightmost vertical wall. Drag the blue filled circle to north a little bit
8. Select one of the walls, right-click, and select Create Similar option
9. Draw a horizontal wall almost at the middle between gridlines 1 & 2, from left to
right outside the building
10. Start Trim/Extend Multiple Elements and select the Reference to be the vertical
wall located at gridline B, then click the left portion of the wall. That should
clean it up
11. Select the orphan wall at the top right of the building, and check its properties
13. If the outside wall is not connected well, use Trim/Extend to Corner, and
Trim/Extend Multiple Elements to make it right
15. You will not see anything. Using Properties, set Underlay Range Base Level to
be Level 2. What are you see now?
5-19