Professional Documents
Culture Documents
Exercise 11
Exercise 11
Exercise 11
1. Start Revit 2019
4. Create a section, which cuts Cafeteria, Gents Room, and Ladies Room.
Change the depth of the section to be inside the walls of Cafeteria
5. From Project Browser rename the name of the section to Cafeteria & Toilets.
Set the Sub-Discipline to Coordination
8. We want to create a Plenum level for the Ground floor. Go to Architecture tab,
locate Datum panel, and click Level command. From Properties change the
type to Plenum. Using Options bar, click Plan View Types button, turn off all
types except Coordination Plan, and from Draw panel, click Pick Lines tool,
pick the upper edge of the ceiling. Rename the level to Plenum 0, and answer
Yes to the question
11. Start View Range command, and set Cut Plane = 150mm
12. Start Space command, from Properties set Limit Offset = 1300mm, and click at
the middle of the building. Rename the new Space Plenum 0
13. Go back to Cafeteria & Toilets section view, and see how the new space filled
the height between ceiling and floor
15. From Project Browser rename the name of the section to East Wing. Set the
Sub-Discipline to Coordination
16. Go to the new section, and turn on the Space Interior colors
5-12
Chapter 5: Creating Spaces and Zones
17. You can notice, that Corridor 224 space is extending to the floor and not to the
ceiling. Change the space offset to be 2700
20. Start View Range command, and set Cut Plane = 150mm
21. Start Space command, from Properties set Limit Offset = 1300mm, and click at
the middle of the building. Rename the new Space Plenum 1
22. Go back to Cafeteria & Toilets section, to see that everything is in order.
5-13