Professional Documents
Culture Documents
NTC 5D 7 PDF
NTC 5D 7 PDF
NTC THERMISTOR
NTC
NTC THERMISTOR
OUTLINE
This is a Negative Temperature Coefficient Resistor Whose
resistance changes with ambient temperature changes.
2 4 Thermistor comprises 2or 4 kinds of metal oxides of iron,
nickel,cobalt, manganese and copper, being shaped and
1200 1500
Sintered at high temperature(1200 to 1500 )
B B Value
B B value stands for the thermal exponent at a negative
temperature coefficient. lt's defined as a ratio of the balance
between the natural logarithms of resistance values at zero-
power to the balance between the reciprocals of the two
temperatures.The formula is as below:
RT1 ( 1 1 ) T T R
B=ln / = 1 2 ln T1 R T1 ( 1 1 ) T1 T2 R
Rt2 T1 T2 T2 T1 RT2 B=ln / = ln T1
R t2 T1 T2 T2 T1 R T2
1 DRT B
=
T = 1 DR T B
RT DT T2 T = =
R T DT T2
Dissipation Coefficient
It's the ratio of the changes with a thermistor dissipation power, in
, a pre-set ambient temperature, to the changes with the
=P/T temperature. The formula is as below: = P/ T changes in
response when the ambient temperature changes, within the
ranges of the working temperature.
APPLICATIONS
USB Conversion power supply, switch power, UPS power, Kinds of electric
heter, electronic energy-saving lamps, electronic ballast etc all kinds
of power cicuit proterction of electronic equipments, filament proterction
of CRT, bulb and other lighting lamps.
(NTC)
Surge-Arrestor NTC Thermistor
FEATURES
Small in size,high-powered, and very capable of bringing
down the surge current;
Quick in reaction;
B High in B value and low in residual current;
Long service life and high reliability;
High coefficient of safety and wide range of application.
HOW TO ORDER
NTC 10 D 13
10 13
Negative Temperature Cofficient Resistor Resistance Value:10 Diameter of Chip: 13
DIMENSIONS (mm)
A D
C
E
(mm)
A C 1 D E 0.05 F MAX
Type MAX MAX
1 13 2A E 0.6
2 G H
Remarks:1 "E"value may be 0.6 for resistors for which the chip's diameter is 13
and the working current is 2A.
2 "G"column and "H" column stand for bend dimensions of the lead.