This document discusses soil parameters for sand in PLAXIS 2D modeling. Sand is a granular material with a grain size between 0.06-2mm. Common soil parameters for sand include internal friction angle between 30-45 degrees, cohesion of 0 kPa, density between 16-20 kN/m3, and modulus of elasticity between 10-30 MPa. These parameters can be adjusted based on density, gradation, and stress history of the specific sand.
This document discusses soil parameters for sand in PLAXIS 2D modeling. Sand is a granular material with a grain size between 0.06-2mm. Common soil parameters for sand include internal friction angle between 30-45 degrees, cohesion of 0 kPa, density between 16-20 kN/m3, and modulus of elasticity between 10-30 MPa. These parameters can be adjusted based on density, gradation, and stress history of the specific sand.
This document discusses soil parameters for sand in PLAXIS 2D modeling. Sand is a granular material with a grain size between 0.06-2mm. Common soil parameters for sand include internal friction angle between 30-45 degrees, cohesion of 0 kPa, density between 16-20 kN/m3, and modulus of elasticity between 10-30 MPa. These parameters can be adjusted based on density, gradation, and stress history of the specific sand.