Professional Documents
Culture Documents
Part B
1. Derive the expression for the shear flow in thin walled single cell subjected to torque
q dS
load.( β=
2 AG ∮ t
Refer class note)
2. Obtain the shear flow for the thin walled structure shown in the FigGiven that
T=20000Ncm, G=25GPa, t=1cm everywhere
(ANS:q1=31.72N/cm,q2=37.6N/cm, q3=31.84Ncm)
3. A multicell structure shown in Fig. is subjected to a clockwise torque of 1000 N-m.
Compute the shear flow in the cell structure and the associated twist.
4. Determine the shearflow and angle of twist per unit length of fig shown.
7. Obtain the shear flow distribution for the closed section shown in Fig. Each stringer area
is 6.5 cm2.
8. Find the shear center for the wing cross section shown in fig.The cross section is
symmetrical about a horizontal axis.