Professional Documents
Culture Documents
1. Draw the plan, section and front elevation of a single storied office building (Load bearing
structure) with the following facilities and plot to suitable scale by showing all dimensions.
Consider roof slab thickness 125mm, roof height 3500mm, Plinth level 600mm.
2. Draw the plan, section and front elevation of a single storied residential building (Load
bearing structure) with the following facilities and plot to suitable scale by showing all
dimensions.
Consider roof slab thickness 125mm, roof height 3000mm, Plinth level 600mm.
3. Draw the plan, section and front elevation of a double storyed residential building (Load
bearing structure) with the following facilities and plot to suitable scale by showing all
dimensions.
Consider roof slab thickness 125mm, roof height 3000mm, Plinth level 600mm.
4. Draw the plan and sectional view for an industrial building with steel roof truss with the
following facilities and plot to suitable scale by showing all dimensions.
Consider roof height 4000mm, rise of truss 1500 m, Plinth level 450mm
5. Draw the plan and sectional view of an industrial building with north light roof truss for the
following details.
Work space 10000 x 15000 mm
Consider roof height 4000mm, rise of truss 1500 m, Plinth level 450mm
6 . Draw the plan, section and front elevation of primary school building (framed structure).
7 . Draw the plan, section and elevation of single storyed residiential building with pitched roof
for the following details.
i) Living room 5000 x 4500 mm
8. Draw the plan, section and elevation of a single storey hospital building with RCC framed
structure with the plinth area of about 400 sq m.
9. Draw the plan, section and elevation of a single storey library building with RCC framed
structure with plinth area 250 sq m.
10. Draw the plan, section and elevation of a workshop building with north light roof truss of
dimension 200 sq m. Assume suitable dimension for the required components.
11. Draw the plan, section and elevation of a single storey residential building with area of 250
sq m with RCC flat roof.
12. Draw the ground floor plan, section and elevation of a two storey complex with RCC flat
roof. Assume the suitable dimension required for the component.
13. Draw the plan, section and elevation of a single storey residential building with inclined RCC
roof with the area of 250 sq m. The slab thickness is 150mm.
14. A residential building is to be planned over a plot of 260 sq m. The build up area should not
exceed 40 % of plot area. A margin of 5m in front of 3m on either side to be left. Assuming
suitable dimension of plot, draw a fully dimension plan, section and elevation for above building
which is single storeyed.
15. Draw the plan, section and elevation of a single storey primary school building with load
bearing wall structure with the plinth area of 300 sq m.
16. Draw the plan, section and elevation of a industrial building with king post roof truss of
dimension 150 sq m. Assume suitable dimension for the required components.
17. Draw the plan, section and elevation of a industrial building with North light roof truss of
dimension 300 sq m. Assume suitable dimension for the required components.
19 Draw the plan, section and elevation of a single storey residential building with area of 250 sq m
with RCC flat roof.
20. Draw the plan, section and elevation of a single storey hospital building with RCC framed
structure with the plinth area of about 450 sq m.