Professional Documents
Culture Documents
SWP-25
Safety On Night Work
1 Adequate general lighting should be provided (by others) at the perimeter of the working zone
including access or passageways.
2 Flood lighting should be installed or positioned in such a way to avoid direct or reflected glare
as well as objectionable shadow.
3 General lighting should be position above working level and mounted as high as possible.
4 Traffic Controller equipped with control baton; reflective glove; highly visible green reflective
vest to station at the strategic/safe location to control and guide all vehicular where necessary.
Traffic controller to ensure no one should remain at the rear side of the moving vehicular.
5 The site safety supervisor and or site supervisor to conduct briefing of SWP, RA and site
instructions to all workers through toolbox meeting prior work.
6 During toolbox meeting for night shift, safety personnel are to conduct visual check on all
work personnel to use/put on basic PPE for all site personnel working at night (e.g. highly
reflective vest). And to observe if anyone appears fatigue or ill.
12 Safety Personnel on duty to remind daily on the potential burn/ scald by contact with hot
surface, liquid or steam (eg. radiator)
13 Safety Personnel to conduct site walk and inspection to identify if any opening exposed to
falling hazard