Professional Documents
Culture Documents
00 31-Mar-15
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
Installation of Wellhead Guard Rails. SAIC-L-2088 30-Apr-17 MECH-
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
The Buyer has the Right to inspect all materials and workmanship, and
shall have unrestricted entry to the shop of the Fabricator at all times
while work is being performed. The Buyer may reject improper, inferior,
defective, or unsuitable materials and workmanship. All materials and 12-SAMSS-007
A1
workmanship rejected shall be repaired or replaced by the Fabricator as Para 7.2
directed by the Buyer. The company Inspector shall have access to the
Vendor's facilities to see that SAES-H-100 quality elements are in place
prior to and during blasting, priming and coating
All material shall be of New Stock.The minimum thickness of any part of 12-SAMSS-007
A3
the structural shape shall be 5mm. Para 4.1.1 , 4.1.2
All welded structural connections shall use weld filler material conforming 12-SAMSS-007
to ANSI/AWS D1.1 Section 3.3 (including Table 3.1) low hydrogen with an Para 4.11, and
A6
electrode strength of 58ksi (400 Mpa) minimum yield strength and 70ksi SAES-M-001
(480 Mpa) tensile strength, unless otherwise required. Para 7.1.13.1
The welding symbols used on plans and shop drawings shall be per the
12-SAMSS-007
A8 American Welding Society (AWS). The field connection symbols shall
Para 6.1.5
distinguish between assembly yard and erection site connections.
All welds shall have 100% visual inspection performed per ANSI/AWS
12-SAMSS-007
A11 D1.1. In addition, any strikes, gouges, and other indications of careless
Para 7.6 a)
workmanship (such as surface porosity) shall be removed by grinding.
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
SAES-M-001
The edges of all tightly contacting surfaces shall be completely seal Para 7.1.13.3
A13
welded. 12-SAMSS-007
Cl 5.2.3.4
The minimum fillet weld size is 3/16 inch (5 mm) for structural welds. Seal 12-SAMSS-007
A15
welds may be 1/8 inch (3 mm) minimum fillet weld. Para 6.2.6.4
12-SAMSS-007
A16 Fabricator shall remove all run-off bars and extension tabs.
Para 6.2.6.9
12-SAMSS-007
A17 All re-entrant corners shall be shaped, notched-free, to a radius.
Para 6.1.11
Vent holes shall be provided for piping & tubular assemblies as required
12-SAMSS-007
A18 by ASTM A 385/A385M.The vent holes shall be located in the bottom side
Para 5.2.3.5
to prevent rain water accumulation.
Before surface preparation, the Fabricator shall remove all sharp corners,
12-SAMSS-007
A19 burrs (including bolt hole burrs), weld spatter, slag, weld flux, loose mill
Para 6.1.15
scale and other foreign matter.
REMARKS:
REFERENCE DOCUMENTS:
1- Standard Drawing, AB-036685 Sht 001- Rev-1-- Wellhead Guard Barrier.
2- SAES-M-001-- Structural Design Criteria for Non-Building Structures, 19 Dec 2010
3- 12-SAMSS-007 -- Fabrication of Structural and Miscellaneous Steel, 17 May 2011
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
Name, Organization,
Name, Sign and Date:
Initials and Date: