Professional Documents
Culture Documents
LN LMandrels PDF
LN LMandrels PDF
LOCK MANDRELS
Expander Mandrel
This section describes Halliburton’s landing nipples
and lock mandrels, as well as lock mandrels for wells Double-Action
Spring
CN03538
without landing nipples.
Locking Key
SELECTIVE BY RUNNING TOOL
The Halliburton landing nipples and lock mandrels
Packing
CN03539
that are selective by running tool consist of Otis ® X®
and R® series landing nipples and lock mandrels. The
Otis XN® and RN® no-go landing nipples and no-go Otis® X®
lock mandrels are also available. Landing Nipple and Lock Mandrel
Otis X® and R® Landing Nipples and Lock Mandrels
Halliburton’s Otis X and R Landing Nipples are run
into the well on the completion tubing to provide a Fishing Neck
specific landing location for subsurface flow control
equipment. The common internal profiles of these
landing nipples make them universal. The Otis X
landing nipple is used in standard weight tubing; the CN03540 Expander Mandrel
Otis R landing nipple is typically used with heavy-
Double-Acting Spring
weight tubing.
The slickline operator using the selective running tool Lock Mandrels
can set the flow control in any one of the landing • faster slickline service because of the
nipples at the desired depth. If this location is unsatis- retractable keys
factory or if well conditions change, the flow control • operator control of locating, landing, and locking in
may be moved up or down the tubing string to another the selected nipple
nipple location. These operations can be done by • inside fishing neck provides large ID to
slickline under pressure without killing the well. maximize production
• optional holddown feature for high flow rates and
Otis® XN® and RN® No-Go Landing Nipples and safety valve installations
Lock Mandrels
This equipment is designed for use in single nipple
installations or as the bottom nipple in a series of Otis
X® or R® landing nipples. These landing nipples have Fishing Neck
the same packing bore ID for a particular tubing size
and weight. Otis X and XN landing nipples are de-
signed for use with standard weight tubing; Otis R and Expander Mandrel
RN landing nipples are designed for use with heavy-
weight tubing. (The N designates no-go nipples.)
Double-Acting Spring
Applications
• plugging under pressure
• almost unlimited locations for setting and Locking Keys
CN03542
locking subsurface flow controls
Packing
Features
Landing Nipples
• large bore for minimum restriction No-Go Equalizing Sub
• universal nipple with one internal profile CN03543
Lock Mandrels
• retractable locking keys
• locks designed to hold pressure from above or
Otis® XN® No-Go
below or from sudden reversals
Landing Nipple and Lock Mandrel
• extra large ID for higher flow volumes
Optional Holddown
• interference holddown for smaller locks
• shear pin holddown for larger locks
Fishing Neck
Note: The optional holddown feature is recommended
for SSSV installations. Both features provide additional
locking integrity to withstand rigorous well conditions.
Expander Mandrel
Benefits
Landing Nipples Double-Acting Spring
• versatility helps reduce completion and
CN03544
Ordering Information
Specify: X® or XN®; R® or RN ®; packing bore; tubing size, weight, grade, and thread; service environment (standard, %H2S, %CO2, amines/other chemicals,
chloride content, temperatures, pressures, etc.); API monogramming or other certification requirements; special hold-down (interference or shear pin on lock
mandrel); special material and elastomer requirements, if applicable.
Part number prefixes: 11X, XNlanding nipple; 711X, XNAPI/monogrammed landing nipple; 10XO, XNlock mandrel; 710XO, XNAPI/monogrammed
lock mandrel; 11R, RNlanding nipple; 711R, RNAPI/monogrammed landing nipple; 10RO, RNlock mandrel; 710RO, RNAPI/monogrammed lock
mandrel