Professional Documents
Culture Documents
WallLateralForce UBC
WallLateralForce UBC
CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Lateral Force for One-Story Wall Based on UBC 97
INPUT DATA
WALL THICKNESS t = 8 in
PARAPET HEIGHT hp = 4 ft
WALL HEIGHT h = 20 ft
TOTAL WALL DENSITY r = 130 pcf
SEISMIC ZONE (1, 2A, 2B, 3, or 4) 4 Zone 4
SEISMIC COFFICIENT Ca = 0.57 (UBC Tab. 16-Q)
IMPORTANCE FACTOR Ip = 1.15 (UBC Tab. 16-K)
BASIC WIND VELOCITY V = 70 mph
EXPOSURE TYPE (B, C, D) C
DESIGN SUMMARY
Out-of-plane force for wall design w1 = 41.3 psf (Seismic governs)
Out-of-plane force for parapet design w2 = 135.3 psf (Seismic governs)
Out-of-plane force for anchorage design Fanch = 1169 plf (Horizontal direction)
(The governing seismic forces have been divided by 1.4 for ASD)
WIND ANALYSIS
Out-of-plane wind force for wall design (UBC 97 Sec.1620)
h ph
2
= 299 plf (Horizontal)
F anch ,wind C e Cq q s I w
2h
Where : Ce = 1.13 , Cq = 1.46 , qs = 12.60 , Iw = 1.00
(UBC Tab.16-G) (UBC Tab.16-H) (UBC Tab.16-F) (UBC Tab.16-K)
SEISMIC ANALYSIS
Out-of-plane seismic force for wall design (UBC 97 Sec.1632.2)
1
4a p C a I pW p
w1, seismic MIN MAX 0.7C a I pW p , , 4 C a I pW p
2
Rp
a pC a I pW p
MIN MAX 0.7C a I pW p , , 4Ca I pW p = 57.8 psf
R p
Where : ap = 1.0 , Rp = 3.0 , Wp = 86.7 psf
(UBC Tab.16-O) (UBC Tab.16-O)
Out-of-plane seismic force for parapet design (UBC 97 Sec.1632.2)
4a p C a I pW p = 189.4 psf
w 2, seismic MIN MAX 0.7 C a I pW p , , 4 C a I pW p
Rp
Where : ap = 2.5 , Rp = 3.0 , Wp = 86.7 psf
(UBC Tab.16-O) (UBC Tab.16-O)
Out-of-plane seismic force for anchorage design (UBC 97 Sec.1632.2 & 1633.2.8.1)