The document is a bill of quantities for surface water drainage works including various items like drains, box culverts, and pipe culverts. It provides descriptions, quantities, units and rates for over 20 line items ranging from 450mm wide drains to 1200mm wide precast concrete box culverts. The quantities listed are for drainage works across multiple sites as shown on a site plan.
The document is a bill of quantities for surface water drainage works including various items like drains, box culverts, and pipe culverts. It provides descriptions, quantities, units and rates for over 20 line items ranging from 450mm wide drains to 1200mm wide precast concrete box culverts. The quantities listed are for drainage works across multiple sites as shown on a site plan.
The document is a bill of quantities for surface water drainage works including various items like drains, box culverts, and pipe culverts. It provides descriptions, quantities, units and rates for over 20 line items ranging from 450mm wide drains to 1200mm wide precast concrete box culverts. The quantities listed are for drainage works across multiple sites as shown on a site plan.
Quantities are a combination quantity for the whole sites as shown in site plan.
This Bill is to be read in conjunction with
the Specifications, Preamble to All Trades and General Conditions and Preliminaries attached.
The words "as described" where used in this
Bill mean as described in the above documents.
SURFACE DRAIN
Supply, construct and complete drains with
225mm diameter half round HRGW drain channel on 250mm thick mass concrete bedding Grade 20 as base with a layer BRC, 50mm thick lean concrete, 100mm thick compacted hardcore, common bricks on both sides of drain with 25mm thick cement and sand plastering at exposed surfaces, 100mm diameter PVC pipe weephole at 3000mm centres with aggregate filter material wrapped with polyfelt TS 500, 125mm x 125mm x 600mm long precast concrete strut at 3000mm centres, 37m long x 15 mild steel bars at 1000mm centres and including all necessary excavation and part return fill in and ram and cart away surplus material and deposit, spread and level as specified all as per detail drawing numbered as SCE098.00/PBLT/PPM/RD/DT/02
Drain Not Exceeding 1050mm Deep
A 450mm Wide drain with average depth
exceeding 450mm and not exceeding 600mm deep; with a layer BRC A7 in concrete base and 225mm thick brickwall on both sides of drain 6 M
B 450mm Wide drain with average depth
exceeding 600mm and not exceeding 750mm deep; ditto 991 M
BILL NO. 6 - EXTERNAL WORKS To Collection RM
PBLT - PPM WILAYAH TIGA B6/7/1 Description Qty Unit Rate RM
BILL NO. 6.7 - SURFACE WATER DRAINAGE (ALL
PROVISIONAL) (Cont'd) Drain Not Exceeding 1050mm Deep (Cont'd)
A 450mm Wide drain with average depth
exceeding 750mm and not exceeding 900mm deep; ditto 354 M
B 450mm Wide drain with average depth
exceeding 900mm and not exceeding 1050mm deep; ditto 57 M
Supply, construct and complete drains with
300mm diameter half round HRGW drain channel on 250mm thick mass concrete bedding Grade 20 as base with a layer BRC, 50mm thick lean concrete, 100mm thick compacted hardcore,common bricks on both sides of drain with 25mm thick cement and sand plastering at exposed surfaces, 100mm diameter PVC pipe weephole at 3000mm centres with aggregate filter material wrapped with polyfelt TS 500, 125mm x 125mm x 600mm long precast concrete strut at 3000mm centres, 37m long x 15 mild steel bars at 1000mm centres and including all necessary excavation and part return fill in and ram and cart away surplus material and deposit, spread and level as specified all as per detail drawing numbered as SCE098.00/PBLT/PPM/RD/DT/02
Drain Not Exceeding 1050mm Deep
C 600mm Wide drain with average depth
exceeding 900mm and not exceeding 1050mm deep; with a layer BRC A7 in concrete base and 225mm thick brickwall on both sides of drain 38 M
Drain Exceeding 1200mm But Not Exceeding
1350mm Deep
D 600mm Wide drain with average depth
exceeding 1200mm and not exceeding 1350mm deep; with a layer BRC A7 in concrete base and 225mm thick brickwall on both sides of drain 14 M
BILL NO. 6 - EXTERNAL WORKS To Collection RM
PBLT - PPM WILAYAH TIGA B6/7/2 Description Qty Unit Rate RM
BILL NO. 6.7 - SURFACE WATER DRAINAGE (ALL
PROVISIONAL) (Cont'd)
Supply, construct and complete drains with
375mm diameter half round HRGW drain channel on 250mm thick mass concrete bedding Grade 20 as base with a layer BRC, 50mm thick lean concrete, 100mm thick compacted hardcore, common bricks on both sides of drain with 25mm thick cement and sand plastering at exposed surfaces, 100mm diameter PVC pipe weephole at 3000mm centres with aggregate filter material wrapped with polyfelt TS 500, 125mm x 125mm x 600mm long precast concrete strut at 3000mm centres, 37m long x 15 mild steel bars at 1000mm centres and including all necessary excavation and part return fill in and ram and cart away surplus material and deposit, spread and level as specified all as per detail drawing numbered as SCE098.00/PBLT/PPM/RD/DT/02
Drain Exceeding 1500mm But Not Exceeding
1650mm Deep
A 750mm Wide drain with average depth
exceeding 1500mm and not exceeding 1650mm deep; with a layer BRC A7 in concrete base and 225mm thick brickwall on both sides of drain 33 M
Precast Concrete Drain Cover
B Supply and install 125mm thick precast
concrete drain cover slabs cast in size 450mm long x 600mm wide with a layer of BRC A10 and fixing into position all as per detail drawing no. SCE098.00/PBLT/PPM/RD/DT/01 1408 M
C Ditto 450mm long x 750mm wide, ditto 44 M
D Ditto 450mm long x 900mm wide, ditto 33 M
Galvanised Iron Grating
E Supply and install 300mm x 300mm hinge type
galvanised iron drain grating including fixing into position all as per detail drawing no. SCE098.00/PBLT/PPM/RD/DT/01 376 No
BILL NO. 6 - EXTERNAL WORKS To Collection RM
PBLT - PPM WILAYAH TIGA B6/7/3 Description Qty Unit Rate RM
BILL NO. 6.7 - SURFACE WATER DRAINAGE (ALL
PROVISIONAL) (Cont'd)
BOX CULVERT
Supply, construct and complete standard box
culvert sit on 150mm thick concrete base and 50mm thick lean concrete and haunching on both sides, reinforced concrete Grade 30 wingwall on both sides of drain with 25mm thick cement and sand plastering at exposed surfaces, jointing and pointing in cement mortar, including all necessary excavation and well compacted granular backfill on top and ram and cart away surplus material and deposit, spread and level as specified all as per detail drawing No. SCE098.00/PBLT/PPM/RD/DT/01
Box culvert Not Exceeding 1050mm Deep
A 300mm Wide Precast Concrete Culvert depth
exceeding 600mm not exceeding 750mm deep 129 M
B 450mm Wide Precast Concrete Culvert depth
exceeding 600mm not exceeding 750mm deep 55 M
C 450mm Wide Precast Concrete Culvert depth
exceeding 750mm not exceeding 900mm deep 259 M
D 450mm Wide Precast Concrete Culvert depth
exceeding 900mm not exceeding 1050mm deep 17 M
E 600mm Wide Precast Concrete Culvert depth
exceeding 750mm not exceeding 900mm deep 22 M
F 600mm Wide Precast Concrete Culvert depth
exceeding 900mm not exceeding 1050mm deep 82 M
G 900mm Wide Precast Concrete Culvert depth
exceeding 1200mm not exceeding 1350mm deep 36 M
Box culvert Exceeding 1200mm But Not
Exceeding 1350mm Deep
H 600mm Wide Precast Concrete Culvert depth
exceeding 1200mm not exceeding 1350mm deep 11 M
Box culvert Exceeding 1500mm But Not
Exceeding 1650mm Deep
J 600mm Wide Precast Concrete Culvert depth
exceeding 1500mm not exceeding 1650mm deep 21 M
BILL NO. 6 - EXTERNAL WORKS To Collection RM
PBLT - PPM WILAYAH TIGA B6/7/4 Description Qty Unit Rate RM
BILL NO. 6.7 - SURFACE WATER DRAINAGE (ALL
PROVISIONAL) (Cont'd) Supply, construct and complete standard box culvert sit on 150mm thick concrete base and 50mm thick lean concrete and haunching on both sides, reinforced concrete Grade 30 wingwall on both sides of drain with 25mm thick cement and sand plastering at exposed surfaces, jointing and pointing in cement mortar, including all necessary excavation and well compacted granular backfill on top and ram and cart away surplus material and deposit, spread and level as specified all as per detail drawing No. SCE098.00/PBLT/PPM/RD/DT/01 (Cont'd) Box culvert Exceeding 1500mm But Not Exceeding 1650mm Deep (Cont'd)
A 1200mm Wide Precast Concrete Culvert depth
exceeding 1500mm not exceeding 1650mm deep 39 M
PIPE CULVERT
Supply, construct and complete precast
concrete pipe culvert on concrete bedding Grade 20 as base and haunching on bothsides, a layer of BRC A8, 50mm thick screed and including all necessary excavation and part return fill in and ram and cart away surplus material and deposit, spread and level as specified all as per detail drawing no. SCE098.00/PBLT/PPM/RD/DT/02
225mm Diameter Precast Concrete Culvert
Class "Y" as Concealed Pipe Drain
B 225mm Diameter with average depth exceeding
1050mm and not exceeding 1200mm deep 4 M
375mm Diameter Precast Concrete Culvert
Class "Y" as Concealed Pipe Drain
C 375mm Diameter with average depth exceeding
1500mm and not exceeding 1650mm deep 3 M
1200mm Diameter Precast Concrete Culvert
Class "Y" as Concealed Pipe Drain
D 1200mm Diameter with average depth
exceeding 1350mm and not exceeding 1500mm deep 5 M