Professional Documents
Culture Documents
No:RAISCO-WI-010-01
Rawae Al Amal Industrial Services Revision: 0
Date: 02-Apr-2020
Work Instruction
Dco.No.: RAISCO-WI-010-01
List of Revision
QA/QC Manager
Prepared by
Designation Signature Date
Work Instruction
1.0 Purpose
The instruction explains the method of identification and traceability of the materials and
products.
3.0 Responsibility
Stores head along with storekeeper / material controller is responsible for identification and
traceability of the materials and products at works.
4.0 Instruction
Identification of the product is traced through MRIR number written either on the material or on
the tag attached it.
On receipt of Plates, Pipes & Fittings etc., if the material found acceptable, job Number or P.O.
Number or Client name shall be punched / written on the material and during cutting the above
Job Number or P.O. Number or Client name shall be transferred to balance material for easy
traceability.
All rejected materials are identified through “REJECTED” stickers pasted on the material.
All materials under hold shall be pasted with “HOLD” stickers on the materials.
All repair welds during Radiography are shall be pasted with “REPAIR” stickers on the joint.
Stamp transfer shall be carried out on all pressure part materials > 6mm thickness before
processing / cutting.
Work Instruction
Stamp transfer shall be done as per the following details
QC Inspector shall verify the stamp transfer is done correctly and put his stamp or sign near the
marked information. The same method shall be followed for job transfer.
5. Records
6. Retention Period
2 Years.
___________________________