Professional Documents
Culture Documents
Temp.-
Product Short description Properties
range
BERUPLEX Universal lubricant on -25 °C to Excellent thermal stability, Universal lubricant to be used in
CS 2 EP mineral oil and calcium- + 140 °C high wear and corrosion central lubrication systems in the
acetate complex thickener protection, excellent pump mining industry, e.g. conveyor
basis to lubricate and seal ability in central lubrication system, in the steel industry, e.g.
speeds.
BERUTOX To lubricate roller and plain -30 to Excellent consistency Bearings subjected to extreme
and wear even at high (short does not form any hard annealing kilns and drying kilns,
temperatures, loads, corrosive term peak residues, good corrosion rotary kilns, conveyor systems, hot
environments and for all 200°C) protection, reliable wear air fans, electric motors, exhaust
speeds that tolerate grease protection. gas fans for aggressive media, gate
tools.
BERUTOX BERUTOX M 21 EPK is a -10°C to Very good water resistance, Lubrication of heavily loaded roller
M 21 EPK speciality lubricant specifically 160°C good adhesion, water and slide bearings exposed to high
designed for the lubrication of repellent, very high load temperatures and/or moisture. Due
paper industry.
BERUTOX To lubricate plain and roller -10 to Excellent consistency/ Bearings exposed to severely high
friction and wear on does not form any hard or drying furnaces, rotary kilns,
mechanisms exposed to high residues, high corrosion cooling beds, conveyor systems, hot
temperatures and corrosive protection. air fans, electric motors, waste gas
bearings.
BERUTOX Special lubricant for the –10°C to Copes with short term peak Machines and equipment in
MBSA-H lubrication and bordering of +180°C significantly higher than mettalurgical plants, e.g. strand
heavily loaded roller and slide 200°C, excellent resistance casting, cooling beds, run-out ways,
bearings. It can be used for against splash water, good ceramic kilns, cement clincer cooler.
sources.
BERUTOX Lubrication of roller and plain -20 to High temperature grease for Lubrication of roller and plain
VPT 64 bearings, to reduce friction +260°C long-term lubrication. bearings in electric motors, hot gas
and wear at high Extremely stable against fans, calenders, circular conveying
temperatures at speeds that thermal and chemical system, varnishing and annealing
FA 50 MO bearings and to reduce friction +120 °C solid lubricants, excellent industry and construction. Main
and wear at high loads, wear protection, very good bearings of roller presses and
especially shock loads, over a corrosion protection, water vertical roller mills, bearings of slew
wide temperature range. For absorption will not affect rings, crushers, shaking screens,
all speeds that tolerate grease consistency. guide pads of large drive shaft
lubrication. joints.
HIGH LUB To lubricate roller and plain –20°C to EP additives, reliable To lubricate plain and roller
FA 67-400 bearings and to reduce friction +130 °C corrosion protection, high bearings used in the steel industry –
and wear at high loads, wear protection, absorbed especially heavily loaded bearings in
especially shock loads, over a water will not affect working rolls such as in hot rolling