Professional Documents
Culture Documents
Me Main Bearing, Big End Bear
Me Main Bearing, Big End Bear
BULLETIN
Services, Wärtsilä Netherlands B.V.
Engine section Engine type Ref. Date Issue Document No. Page
99 Service information D628 Service 22.10.2010 02 TB628/99/224 1(2)
Big-end bearings
Owing to a change of supplier new material numbers have become necessary for big-end bearings.
Simultaneously repair sizes have been introduced.
As before, the big-end bearings are designed as grooved bearings. For replacement purposes it is
necessary to exchange the complete big-end bearing set. Replacement of an individual bearing shell
is not permissible.
Ordering parts According the standard ordering procedure as described in the engine specific
parts catalogue.
Letter distribution The Wärtsilä Service Network and users/owners of D628 engines
Disclaimer
This Technical Bulletin is designed to provide accurate and authoritative information with regard to the subject-matter covered as was
available at the time of printing. However, the publication deals with complicated technical matters suited only for specialists in the area and
the design of the subject-products is subject to regular improvements, modifications and changes. Consequently, Wärtsilä Netherlands B.V.
and/or any other Wärtsilä group company cannot accept any responsibility or liability for any eventual errors or omissions in this Technical
Bulletin or for discrepancies arising from the features of any actual item in the respective product being different from those shown in this
Technical Bulletin. Wärtsilä Netherlands B.V. and/or any other Wärtsilä group company shall under no circumstances be liable for any
damages or losses, or injury, suffered by any party making use of this Technical Bulletin or the information contained herein.