Professional Documents
Culture Documents
Equipment needed:
Measuring Cups (use a graduated cylinder for a more exact measurement)
Weighing Scale (Use a scale with a readability of 0.1g for more exact weight)
Stirring Rod
Plastic/Glass container
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Put 100 mL distilled/deionized water in a clean container.
4. Add 10 mL Vegetable glycerin to the water.
5. Add 5 g of colorant and mix well until there are no lumps.
6. Add 1 mL of desired flavor and mix well.
7. Add 1 mL of Phenoxyethanol into the mixture.
8. Add 1 mL Vitamin E extract and stir gently until well blended.
9. Using a strainer, transfer the mixture to a clean, labeled container and
store it in a cool, dry place.
10. Throw the lumps from the strainer (if there are any) in the trash bin
(don’t throw it into your sink).
GEL-BASED LIP TINT
Equipment needed:
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix 10 mL vegetable glycerin and 1g Xanthan Gum in a container.
4. Add 87 mL water in the mixture.
5. Add 5 g of colorant and mix well.
6. Add 1 mL of desired flavor and mix well.
7. Add 1 mL of Phenoxyethanol into the mixture.
8. Add 1 mL of Vitamin E extract and stir gently until well-blended.
9. Transfer the mixture to a clean, labeled container and store it in a cool,
dry place.
WATER-BASED MATTE LIP TINT
Equipment needed:
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix 5 g Kaolin Clay into 87 mL water.
4. Add 5 g of colorant and mix well.
5. Add 1 mL of desired flavor and mix well.
6. Add 1 mL of Phenoxyethanol into the mixture.
7. Add 1 mL of Vitamin E extract.
8. Finally, add 10 mL Glycerin and stir gently until well-blended.
9. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
GEL-BASED MATTE LIP TINT
Equipment needed:
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix 5 g Kaolin Clay into 87 mL water.
4. Add 5 g of colorant and 1 mL of desired flavor (in order) and mix well.
5. Add 1 mL of Phenoxyethanol into the mixture.
6. Add 1 mL of Vitamin E extract.
7. In a separate container, combine 10 mL Glycerin and 1 g Xanthan Gum and
add into the mixture. Stir gently until well-blended.
8. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
HD MATTE LIP TINT
Equipment needed:
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix 15 g Kaolin Clay, 1.5 g USP Talc Powder and 2.5 g Aerosil Fumed Silica
in a container. Then, add 65 mL Water and 20 mL Glycerin. Mix well.
4. Add 1 mL of desired flavor and mix.
5. Add 1 mL Vitamin E extract, 2.5 mL Sorbitol, 1 mL Phenoxyethanol in
order with gentle stirring every after addition.
6. Add 10 g of Colorant and mix well.
7. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
POWDER MATTE LIP TINT
Equipment needed:
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix 2 g Kaolin Clay, 14 g USP Talc Powder and 1 g Aerosil Fumed Silica in a
container. Then, add 85.5 mL Water and 10 mL Glycerin. Mix well.
4. Add 2.5 mL Sorbitol, 0.5 mL Vitamin E extract, 1 mL Dimethicone and 1 mL
Phenoxyethanol in order with gentle stirring every after addition.
5. Add 0.5 mL of desired flavor and 10 g of Colorant. Mix well.
6. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
POWDER LIP CREAM
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1g or 0.10g for more exact
measurement)
Stirring Rod
Plastic/Glass container
Raw Material Measurement Chemist’s Notes
Distilled/Deionized Water 74 g Diluent
Dimethicone Trimethyl 1g Anti-foaming agent
Siloxy Silicate
Fumed Silica 3.3 g Thickening Agent
Glycerin 5.0 g Adds Moisture
Phenoxyethanol 0.2 g Preservative
Iron oxide 15 g Colorant
Flavor 1.5 g -
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Combine 74 g water, 1 g Dimethicone Trimethyl Siloxy Silicate and 3.3 g
Fumed Silica. Add more silica for a creamier consistency.
4. Add 5 g Glycerin and 0.2 g Phenoxyethanol in order and gently mix every
after addition.
5. Then, add 15 g iron oxide and 1.5 g flavor in order and gently mix as well.
6. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
VELVET MATTE LIP TINT
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1g or 0.10g for more exact
measurement)
Stirring Rod
Plastic/Glass container
Raw Material Measurement Chemist’s Notes
Sunflower Oil 660 g Base for the tint. Adds moisture
Grapeseed Oil 65 g Base for the tint. Adds moisture
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix 66 g Suflower oil and 6.5 g Grapeseed oil.
4. Add 1.5 g Dimethicone, 5 g Talc Powder, 0.5 g Kaolin Clay and 3.5 g Fumed
Silica in order and mix well. Add more Silica until preferred consistency is
achieved.
5. Add 0.5 g Phenoxyethanol and mix well.
6. Add the 15 g iron oxide and 1.5 g flavor and mix well.
7. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
LIP BALM & CLAY BLUSH
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1/0.10g for more exact
weight)
Heat plate/Microwave/Stovetop
Heat Resistant Glass Bowl
Stirring Rod
Raw Material Measurement Purpose/Chemist’s Notes
Shea Butter 15 g Solid base for the tint; Moisturizer
Cocoa Butter 15 g Solid base for the tint; Moisturizer
Candelilla Wax 15 g Holds the balm together
Bees wax 5g Holds the balm together
Carrier Oila 15 g Emollient
Glycerin 9g Adds moisture
Oil-Soluble Colorant 15 g -
Optional; May be added for a matte
Kaolin Clay 3.5 g finish; Bentonite/talcum are good
alternatives.
Flavor 10 g
-
Phenoxyethanol 1g
Preservative
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Place 20 g Shea Butter, 20 g Cocoa Butter, 20 g Candililla wax, 7 g Bees
wax and 20 g Carrier Oila on a heat resistant glass bowl and melt using a
microwave oven (If you do not have access to a microwave oven, you can
use the Double Broiler Method shown in Figures 1a and 1b from
thetoughcookie.com.
DOUBLE BROILER METHOD
Step 1: Fill the pan with an inch of water and heat the water to a simmer.
Step 2: Place the heat-resistant bowl over (not in) the simmering water.
a
Carrier Oils: Grapeseed Oil, Coconut Oil, Rosehip Oil, Sweet Almond Oil, Jojoba Oil,
Sunflower Oil, Olive Oil.
MAGIC CHANGING COLOR LIPGLOSS
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1/0.10g for more exact
weight)
Heat plate/Microwave/Stovetop
Heat Resistant Glass Bowl
Stirring Rod
Raw Material Measurement Purpose/Chemist’s Notes
Grapeseed Oil 2.5 g Base for the lip gloss
Sunflower Oil 2.5 g Base for the lip gloss
Fractionated Coconut Oil 20 g Base for the lip gloss
Castor Oil 69 g For added moisture
Vitamin E 4g Added nutrients
Citric Acid 1.5 g Thickener, pH adjuster
D&C Red 27, CI 45410 0.5 g Colorant
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Mix all the oils together (make sure that all the oils are in liquid form) and
mix gently.
4. Add 4 g of Vitamin E and mix.
5. Add 1.5 g Citric Acid or until the desired texture is achieved.
6. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
EYEBROW POMADE
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1/0.10g for more exact
weight)
Heat plate/Microwave/Stovetop
Heat Resistant Glass Bowl
Stirring Rod
Raw Material Measurement Purpose/Chemist’s Notes
Colorant 20 g Adjust depending on preference
Candelilla Wax 17 g Holds the pomade together
Carnauba Wax 16 g Holds the pomade together
Carrier Oila 15 g Adds Moisture
Cocoa Butter 8g Adds Moisture
Titanium dioxide 6g Thickening Agent; UVA/UVB Filter
Shea Butter 6g Adds Moisture
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Place 17 g Candelilla Wax, 16 g Carnauba Wax, 8 g Cocoa Butter and 6 g
Shea Butter on a heat resistant glass bowl and melt using a microwave
oven (If you do not have access to a microwave oven, you cause the Double
Broiler Method shown in Figures 1a and 1b from thetoughcookie.com.
4. Add 20 g colorant (should be oil-soluble), 15 g Carrier Oil and 6 g Titanium
Dioxide and mix well.
5. Transfer the mixture to a clean, labeled container and store it in a cool, dry
place.
SKIN HIGHLIGHTER
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1/0.10g for more exact
weight)
Heat plate/Microwave/Stovetop
Heat Resistant Glass Bowl
Stirring Rod
Raw Material Measurement Purpose/Chemist’s Notes
Bees Wax 40 g Base for the highlighter
Carrier Oila 40 g Adds moisture
White Mica Powder 20 g Gives shimmering effect
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Melt 40 g Bees wax using a microwave oven or Double Boiler Method.
4. Add 40 g Carrier Oil to the melted Bees wax and mix well.
5. Add 20 g of White Mica Powder and gently mix.
6. Transfer the mixture to clean, labeled containers and store it in a cool, dry
place.
EDIBLE LIP SCRUB
Equipment needed:
Weighing Scale (Use a scale with a readability of 0.1/0.10g for more exact
weight)
Stirring Rod
Clan mixing bowl
Raw Material Measurement Purpose/Chemist’s Notes
Sugar crystals 80 g For mechanical scrubbing
Carrier Oila 5g Holds the scrub together
Honey (optional) 5g Adds moisture
Flavor 5g -
Colorant 5g Oil-soluble
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Place 80 g sugar crystals in a mixing bowl.
4. Add 5 g of chosen carrier oil and 5 g of honey and mix until fully
incorporated. (Double the measurement for the carrier oil if honey is not
to be used).
5. Add the colorant and flavor until preferred outcome is reached.
6. Transfer the mixture to clean, labeled containers and store it in a cool, dry
place.
Procedure:
1. Prepare all the needed materials and equipment. Make sure to have a
clean working area.
2. Wear gloves, mask, and hair net (or you can just tie your hair) to avoid
contamination.
3. Combine all the ingredients in a clean container and make sure all
ingredients are well- blended.
6. Transfer the mixture to clean, labeled containers and store it in a cool, dry
place.