Professional Documents
Culture Documents
Department of Education
REGION VII - CENTRAL VISAYAS
SCHOOLS DIVISION OF DANAO CITY
Directions: Read the questions carefully. Encircle the letter of the best answer.
1. Which among the following design defects that raise and support heavy objects and assist in steering and
braking equipment can and crush a worker?
A. Pinch Points B. Wrap Points
C. Freewheeling Points D. Hydraulic lifts and Hoses
2. Which among the following design defects that exposed rotating machine component attached at one end
to a piece of equipment?
A. Pinch Points B. Wrap Points
C. Freewheeling Points D. Hydraulic lifts and Hoses
3. Which among the following design defects that the points of the two objects on the machine make it
contact, with at least one of them moving in a circle?
A. Pinch Points B. Wrap Points
C. Freewheeling Points D. Hydraulic lifts and Hoses
4. Which among the following design defects that released springs that cause injury?
A. Pinch Points B. Wrap Points
C. Freewheeling Points D. Spring Points
5. Which among the following design defects, after a farmer turns off the machine power, equipment parts
such as rotary motor blades and baler flywheels continue to rotate long after it is has been switched off?
A. Pinch Points B. Wrap Points
C. Freewheeling Points D. Spring Points
9. What serious injuries or kills many people every year? In fact farm fatalities are on the rise.
A. Risk B. Repair C. Defective farm equipment D. Wrap Points
10. Why do we need to separate and fixed immediately the worn out tools?
A. to repair defective tools B. To avoid accident
C. To reduced operational cost and production D. To determine the functionality of tools
Republic of the Philippines
Department of Education
REGION VII - CENTRAL VISAYAS
SCHOOLS DIVISION OF DANAO CITY
Test II. TRUE OR FALSE: Read and analyze each statement below .Write True if the statement
is correct; False if the statement is incorrect on the space provided for.
______12.Tools that are worn out should be separated and be fixed immediately to avoid accident.
______14.Always push the file across the blade in a motion away from your body.
______15. Clean accumulated rust and dirt off all metal surfaces with paint.
______16.Move the file diagonally, so that its cutting teeth are biting into the metal on the tool.
______17.Use medium-grit sandpaper to remove rust on larger tools such as shovels, spades,
and hoes.
______19. Oil helps tool to work as intended and will also prevent the formation of rust.
______20.For pruners, use a whetstone because it produces a very sharp cutting edge.
_________________________________
Parent’s Signature over Printed Name