Professional Documents
Culture Documents
The Electronic Copy of the form should be filled in, and the student should submit two Printed Copies of the completed form to the admin office at the dept. of
EEE. Incomplete application forms will not be evaluated
Title of the Design of high frequency transformer for power electronics circuit
Project/Thesis
1. High frequency power transformers in switched mode power supplies and insulated dc
to dc converters.
Summary of the
Proposal (The 2. Power efficiency of switched mode power supplies and insulated DC to DC converters.
summary of the 3. The main significance of high frequency transformers is in “Switched Mode Power
proposal will cover Supplies”. The main conceptual idea of Switched Mode Power Supply is using energy
objectives,
backgrounds of thesis, efficient devices to transfer/convert the Power (A.C./D.C) from the source to the sink/load.
methodology and 4. We will use MATLAB software to design the high frequency transformer .
expected output
results)
I/we am aware of the ‘Principles of Research Ethics’ as should be obeyed and I/we declare that my/our thesis/project will be the result of my/our own independent
work and that in all cases, material from the work of others will be fully cited and referenced as required by the academic rules and ethical conduct. I/we
understand that if any kind of plagiarism is detected in my/our written work, the department will take the case to the ‘Disciplinary Committee’ for necessary
action.
Supervisor Name
Engr. Khandakar Abdullah Al Signature Date
Mamun
Part IV. Approval of the 4th Year Examination Committee
Page 1/1
Chairman 4th Year
Examination Committee Signature Date
Name & Title
ABSTRACT:
Increasing the operational frequency is the most common solution
to achieve higher power densities. This work proposes a design and
optimization methodology of a high power high frequency
transformer accounting for the tuned leakage inductance of the
transformer, as well as high isolation requirements, particularly in
power electronics circuit application. In spite of having several
models we can use and develop a model, is so called pseudo-
empirical expression derived from a rigorous regression algorithm
based on an extensive 2D finite element simulation scenario. High-
Frequency Power Transformer , demonstrates how high frequency
switching can be used to increase the power handling capability of
power transformers. This type of power transformer is commonly
used to perform dc-to-dc conversion in switched-mode power
supply.
Introduction:
A transformer is a static device that couples two circuits for the
purpose of transferring alternating current from one circuit to
another by electromagnetic induction. A high frequency power
transformer commonly used to implement switched-mode power
supplies in a large variety of small electrical equipment, such as
digital television sets, home entertainment systems, desktop
computers, computer peripherals, etc, and in insulated dc-to-dc
converters such as those found in many grid-tied inverters powered
by solar panels or wind turbines.
Page 2/1
Fig: High frequency transformer
Objectives/Hypothesis:
Methods:
1. For designing of a high frequency transformer we will use
pseudo-empirical expression or any other method which will be
advised by our supervisor .
2. As we completed our ELECTRICAL MACHINE lab and also we
completed our power system courses we have some important
ideas about transformer which will be helpful for us to complete
this thesis.
Page 3/1
Expected Result:
We want to design a high frequency transformer for power
electronics devices and our main goal is to improve the efficiency of
the transformer by reducing the losses. We will try our best to get
desired result as much as possible.
Page 4/1