Professional Documents
Culture Documents
(K.S.C)
PRESSURE GAUGES REV. A3
Clean Fuels Project (CFP)
31-Mar-17
KNPC Contract No. CFP/EPC/0054-MAB1
PSCJ Job No. JI-2025
Unit – 129 Page 2 of 6
Record of Revisions
List of Holds
Page/Section Description
Kuwait National Petroleum Company INSTRUMENT DATASHEET P6003SHU-129-30-PG-082
(K.S.C)
PRESSURE GAUGES REV. A3
Clean Fuels Project (CFP)
31-Mar-17
KNPC Contract No. CFP/EPC/0054-MAB1
PSCJ Job No. JI-2025
Unit – 129 Page 3 of 6
2.10 Oil-filled pressure gauges may have disposal (eg. Environmental) issues and shall
be avoided.
2.11 Vendor to provide material certification as per EN 10204:2004 of type 3.1 for
pressure containing parts and of type 2.2 for all other parts.
2.12 Factory testing, Factory Inspection and certification shall be as specified in MESC
SPE 60.35/001.
2.13 Following tests, where applicable, shall be performed –
• Non Destructive Examination (NDE) in accordance with DEP 31.38.01.31,
Clause 4, Inspection and Testing
• Positive Material Identification in accordance with DEP 31.10.00.10.
• Inter Granular Corrosion (IGC) test in accordance with ASTM A262.
2.14 Painting, where applicable, shall be in accordance with DEP 30.48.00.31 and its
project variation 30.48.00.31-P6000CFP-000-PV.
2.15 All pressure containing parts shall be designed with a safety factor 4 to 1.
2.16 Dials shall be provided with additional identification in accordance with SPE
60.35/001.
a) Manufacturer’s name or trade mark.
b) Manufacturer’s Serial number.
One wrench flat shall be stamped with the code number of the pressure sensing
element. The tube anchorage shall be marked with the range of the bourdon tube.
2.17 All instruments shall be suitable for the following environment conditions –
Temperature
• Maximum solar : 85 °C
• Maximum ambient : 50 °C
• Minimum ambient : -3 °C
Relative humidity
• Minimum Relative Humidity : 30%
• Maximum Relative Humidity : 100%
Rainfall
• Frequency : Infrequent
• Average : 115.44 mm/year
• Maximum monthly average rate : 26.79mm
• Minimum monthly average rate : 2.8mm
Other ambient conditions shall be as per P6002MAB.000.10.08.001
Kuwait National Petroleum Company INSTRUMENT DATASHEET P6003SHU-129-30-PG-082
(K.S.C)
PRESSURE GAUGES REV. A3
Clean Fuels Project (CFP)
31-Mar-17
KNPC Contract No. CFP/EPC/0054-MAB1
PSCJ Job No. JI-2025
Unit – 129 Page 6 of 6
2.18 Abbreviations
• VTA : Vendor to Advise
• TBA : To be Advised
• N/A : Not Applicable
• Gen. Notes : General Notes
INSTRUMENT SPECIFICATION SHEETS - PRESSURE GAUGES
Units Units
1 GENERAL : 60 GENERAL :
2 Tag No. 129-PG -1501 61 Plant SHU
3 Service V129101 OUTL 62 Unit 129-01 UTILITY AREA
4 Line No. IA-129-1042-11001B-3"-N 63 Area Classification IEC Zone 1 IIC T3
5 Pipe Material CS (ASTM A106-B) 64 Location INLINE
6 Equipment N/A 65 Design Code --
7 PEFS P6003SHU-129-08-4-J103 66
8 GAUGE / SENSING ELEMENT : 67 DIAPHRAGM SEALS :
9 Measuring Method / Type Mfr Std 68 Seal Type N/A
10 Element Type Bourdon tube 69 Process Connection N/A
11 Element Material SS 316 70 Diaphragm Material N/A
12 Case Type / Style Gen Note 2.5 & 2.6 71 Flange: Size Rating Facing N/A N/A N/A
13 Case Material SS 316 72 Upper Flange Material N/A
14 Bezel Ring Material SS 316 73 Lower Flange Material N/A
15 Window Material Non splintering glass 74 Bolting N/A
16 Case Nom. Diameter 100 mm 75 Capillary Length m N/A
17 Mounting Direct 76 Capillary Material N/A
18 Process Connection Size Gen Note 2.4 77 Capillary Armouring N/A
19 Process Connection Location Bottom 78 Seal Fill Fluid N/A
20 Process Connection Material SS 316 79 Gauge Connection N/A
21 Instrument Range psig 0 - 150 80 Flushing Ring Connection N/A
22 Measurement Accuracy % 1% of Span 81 Flushing Ring Material N/A
23 Scale Graduation Gen Note 2.9 82
24 Dial / Pointer Colour White background
Black
with Black markings
83
25 Adjustable Red Line N/A 84
26 Overrange Protection Gen Note 2.7 85
27 Blow Out Protection Gen Note 2.5 86
28 Gauge Fill Fluid N/A / Gen Note 2.10 87
29 Filling Plug N/A 88
30 Syphon N/A 89 SPECIAL REQUIREMENTS :
31 Pulsation Dampner / Snubber N/A 90 NACE Requirements N/A
32 Pulsation Dampner Type N/A 91 Certification Authority N/A
33 Pulsation Dampner Material N/A 92 Certification Approval No. N/A
34 Pulsation Dampner Process Connection N/A 93 Material Certificate Gen Note 2.11
35 Pulsation Dampner Gauge Connection N/A 94 Test Requirements Gen Note 2.12 & 2.13
36 Gauge Saver N/A 95 Special Requirements for Service N/A
37 IP Rating IP 67 96 Fire Safe Design N/A
38 PROCESS DATA : 97 Paint Finish Gen Note 2.14
39 Fluid Name Instrument Air 98 Weight Kg 0.5
40 Fluid State / Phase Gas/Vapor Single phase 99
41 Type Pressure 100
42 Operating Conditions Min Norm Max 101
43 Pressure psig 68.02 109.9 125. 102
44 Temperature °F 131 131 131 103
45 Vibration 104
46 Pulsation 105
47 Corrosive No 106 NON-VENDOR RELATED INFO :
48 Toxic Agents No 107 Tracing Temperature N/A
49 Design Pressure Min/Max psig 150 108 MESC Code N/A
50 Design Temperature Min/Max °F -3 350 109
51 110
52 PURCHASE DATA : 111 REMARKS :
53 Req No. P6012MAB.000.10.30.016 112
54 Manufacturer GENERAL INSTRUMENTS 113
55 Model Number SFBSPG-V 114
56 Supplier GENERAL INSTRUMENTS 115
57 Serial Number 1 116
58 Purchase Order No. 2025JV0J10314 117
59 Item Number 1047 118
A3 YP RB KRM 3/31/2017 Re-Issued for Design INSTRUMENT SPECIFICATION KUWAIT NATIONAL
A2 JN JC MDD 5/18/2016 Re-Issued for Design PRESSURE GAUGE
PETROLEUM CO. (KSC)
A1 YP JC MDD 6/16/2015 Issued for Design SHUAIBA REFINERY
O1 DS JC MDD 4/29/2015 Issued for comment Sheet 1 of 1
No. By Chk App Date Revision Spec: 611 Doc No: P6003SHU-129-30-PG-1501 Rev.:A3
MAB_611.psr Rev 3 Pressure Gauge Specification Print Date: 3/31/2017
INSTRUMENT SPECIFICATION SHEETS - PRESSURE GAUGES
Units Units
1 GENERAL : 60 GENERAL :
2 Tag No. 129-PG -1502 61 Plant SHU
3 Service V129101 INSTRUMENT AIR 62 Unit 129-01 UTILITY AREA
4 Line No. N/A 63 Area Classification IEC Zone 1 IIC T3
5 Pipe Material MATERIAL NOT LISTED 64 Location EQUIP
6 Equipment V-129-101 65 Design Code --
7 PEFS P6003SHU-129-08-4-J103 66
8 GAUGE / SENSING ELEMENT : 67 DIAPHRAGM SEALS :
9 Measuring Method / Type Mfr Std 68 Seal Type N/A
10 Element Type Bourdon tube 69 Process Connection N/A
11 Element Material SS 316 70 Diaphragm Material N/A
12 Case Type / Style Gen Note 2.5 & 2.6 71 Flange: Size Rating Facing N/A N/A N/A
13 Case Material SS 316 72 Upper Flange Material N/A
14 Bezel Ring Material SS 316 73 Lower Flange Material N/A
15 Window Material Non splintering glass 74 Bolting N/A
16 Case Nom. Diameter 100 mm 75 Capillary Length m N/A
17 Mounting Direct 76 Capillary Material N/A
18 Process Connection Size Gen Note 2.4 77 Capillary Armouring N/A
19 Process Connection Location Bottom 78 Seal Fill Fluid N/A
20 Process Connection Material SS 316 79 Gauge Connection N/A
21 Instrument Range psig 0 - 150 80 Flushing Ring Connection N/A
22 Measurement Accuracy % 1% of Span 81 Flushing Ring Material N/A
23 Scale Graduation Gen Note 2.9 82
24 Dial / Pointer Colour White background
Black
with Black markings
83
25 Adjustable Red Line N/A 84
26 Overrange Protection Gen Note 2.7 85
27 Blow Out Protection Gen Note 2.5 86
28 Gauge Fill Fluid N/A / Gen Note 2.10 87
29 Filling Plug N/A 88
30 Syphon N/A 89 SPECIAL REQUIREMENTS :
31 Pulsation Dampner / Snubber N/A 90 NACE Requirements N/A
32 Pulsation Dampner Type N/A 91 Certification Authority N/A
33 Pulsation Dampner Material N/A 92 Certification Approval No. N/A
34 Pulsation Dampner Process Connection N/A 93 Material Certificate Gen Note 2.11
35 Pulsation Dampner Gauge Connection N/A 94 Test Requirements Gen Note 2.12 & 2.13
36 Gauge Saver N/A 95 Special Requirements for Service N/A
37 IP Rating IP 67 96 Fire Safe Design N/A
38 PROCESS DATA : 97 Paint Finish Gen Note 2.14
39 Fluid Name Instrument Air 98 Weight Kg 0.5
40 Fluid State / Phase Gas/Vapor Single phase 99
41 Type Pressure 100
42 Operating Conditions Min Norm Max 101
43 Pressure psig 68.02 109.9 125. 102
44 Temperature °F 131 131 103
45 Vibration 104
46 Pulsation 105
47 Corrosive No 106 NON-VENDOR RELATED INFO :
48 Toxic Agents No 107 Tracing Temperature N/A
49 Design Pressure Min/Max psig 150 108 MESC Code N/A
50 Design Temperature Min/Max °F -3 350 109
51 110
52 PURCHASE DATA : 111 REMARKS :
53 Req No. P6012MAB.000.10.30.016 112
54 Manufacturer GENERAL INSTRUMENTS 113
55 Model Number SFBSPG-V 114
56 Supplier GENERAL INSTRUMENTS 115
57 Serial Number 2 116
58 Purchase Order No. 2025JV0J10314 117
59 Item Number 1048 118
A3 YP RB KRM 3/31/2017 Re-Issued for Design INSTRUMENT SPECIFICATION KUWAIT NATIONAL
A2 JN JC MDD 5/18/2016 Re-Issued for Design PRESSURE GAUGE
PETROLEUM CO. (KSC)
A1 YP JC MDD 6/16/2015 Issued for Design SHUAIBA REFINERY
O1 DS JC MDD 4/29/2015 Issued for comment Sheet 1 of 1
No. By Chk App Date Revision Spec: 611 Doc No: P6003SHU-129-30-PG-1502 Rev.:A3
MAB_611.psr Rev 3 Pressure Gauge Specification Print Date: 3/31/2017
INSTRUMENT SPECIFICATION SHEETS - PRESSURE GAUGES
Units Units
1 GENERAL : 60 GENERAL :
2 Tag No. 129-PG -1503 61 Plant SHU
3 Service ME129102 OUTL 62 Unit 129-01 UTILITY AREA
4 Line No. PA-129-1071-11001B-4"-N 63 Area Classification IEC Zone 1 IIC T3
5 Pipe Material CS (ASTM A106-B) 64 Location INLINE
6 Equipment N/A 65 Design Code --
7 PEFS P6003SHU-129-08-4-J104 66
8 GAUGE / SENSING ELEMENT : 67 DIAPHRAGM SEALS :
9 Measuring Method / Type Mfr Std 68 Seal Type N/A
10 Element Type Bourdon tube 69 Process Connection N/A
11 Element Material SS 316 70 Diaphragm Material N/A
12 Case Type / Style Gen Note 2.5 & 2.6 71 Flange: Size Rating Facing N/A N/A N/A
13 Case Material SS 316 72 Upper Flange Material N/A
14 Bezel Ring Material SS 316 73 Lower Flange Material N/A
15 Window Material Non splintering glass 74 Bolting N/A
16 Case Nom. Diameter 100 mm 75 Capillary Length m N/A
17 Mounting Direct 76 Capillary Material N/A
18 Process Connection Size Gen Note 2.4 77 Capillary Armouring N/A
19 Process Connection Location Bottom 78 Seal Fill Fluid N/A
20 Process Connection Material SS 316 79 Gauge Connection N/A
21 Instrument Range psig 0 - 150 80 Flushing Ring Connection N/A
22 Measurement Accuracy % 1% of Span 81 Flushing Ring Material N/A
23 Scale Graduation Gen Note 2.9 82
24 Dial / Pointer Colour White background
Black
with Black markings
83
25 Adjustable Red Line N/A 84
26 Overrange Protection Gen Note 2.7 85
27 Blow Out Protection Gen Note 2.5 86
28 Gauge Fill Fluid N/A / Gen Note 2.10 87
29 Filling Plug N/A 88
30 Syphon N/A 89 SPECIAL REQUIREMENTS :
31 Pulsation Dampner / Snubber N/A 90 NACE Requirements N/A
32 Pulsation Dampner Type N/A 91 Certification Authority N/A
33 Pulsation Dampner Material N/A 92 Certification Approval No. N/A
34 Pulsation Dampner Process Connection N/A 93 Material Certificate Gen Note 2.11
35 Pulsation Dampner Gauge Connection N/A 94 Test Requirements Gen Note 2.12 & 2.13
36 Gauge Saver N/A 95 Special Requirements for Service N/A
37 IP Rating IP 67 96 Fire Safe Design N/A
38 PROCESS DATA : 97 Paint Finish Gen Note 2.14
39 Fluid Name Plant Air 98 Weight Kg 0.5
40 Fluid State / Phase Gas/Vapor Single phase 99
41 Type Pressure 100
42 Operating Conditions Min Norm Max 101
43 Pressure psig 68.02 109.9 125. 102
44 Temperature °F 131 131 131 103
45 Vibration 104
46 Pulsation 105
47 Corrosive No 106 NON-VENDOR RELATED INFO :
48 Toxic Agents No 107 Tracing Temperature N/A
49 Design Pressure Min/Max psig 150 108 MESC Code N/A
50 Design Temperature Min/Max °F -3 350 109
51 110
52 PURCHASE DATA : 111 REMARKS :
53 Req No. P6012MAB.000.10.30.016 112
54 Manufacturer GENERAL INSTRUMENTS 113
55 Model Number SFBSPG-V 114
56 Supplier GENERAL INSTRUMENTS 115
57 Serial Number 3 116
58 Purchase Order No. 2025JV0J10314 117
59 Item Number 1049 118
A3 YP RB KRM 3/31/2017 Re-Issued for Design INSTRUMENT SPECIFICATION KUWAIT NATIONAL
A2 JN JC MDD 5/18/2016 Re-Issued for Design PRESSURE GAUGE
PETROLEUM CO. (KSC)
A1 YP JC MDD 6/16/2015 Issued for Design SHUAIBA REFINERY
O1 DS JC MDD 4/29/2015 Issued for comment Sheet 1 of 1
No. By Chk App Date Revision Spec: 611 Doc No: P6003SHU-129-30-PG-1503 Rev.:A3
MAB_611.psr Rev 3 Pressure Gauge Specification Print Date: 3/31/2017
INSTRUMENT SPECIFICATION SHEETS - PRESSURE GAUGES
Units Units
1 GENERAL : 60 GENERAL :
2 Tag No. 129-PG -1504 61 Plant SHU
3 Service ME129101A OUTL 62 Unit 129-01 UTILITY AREA
4 Line No. IA-129-1001-11001B-2"-N 63 Area Classification IEC Zone 1 IIC T3
5 Pipe Material CS (ASTM A106-B) 64 Location INLINE
6 Equipment N/A 65 Design Code --
7 PEFS P6003SHU-129-08-4-J101 66
8 GAUGE / SENSING ELEMENT : 67 DIAPHRAGM SEALS :
9 Measuring Method / Type Mfr Std 68 Seal Type N/A
10 Element Type Bourdon tube 69 Process Connection N/A
11 Element Material SS 316 70 Diaphragm Material N/A
12 Case Type / Style Gen Note 2.5 & 2.6 71 Flange: Size Rating Facing N/A N/A N/A
13 Case Material SS 316 72 Upper Flange Material N/A
14 Bezel Ring Material SS 316 73 Lower Flange Material N/A
15 Window Material Non splintering glass 74 Bolting N/A
16 Case Nom. Diameter 100 mm 75 Capillary Length m N/A
17 Mounting Direct 76 Capillary Material N/A
18 Process Connection Size Gen Note 2.4 77 Capillary Armouring N/A
19 Process Connection Location Bottom 78 Seal Fill Fluid N/A
20 Process Connection Material SS 316 79 Gauge Connection N/A
21 Instrument Range psig 0 - 150 80 Flushing Ring Connection N/A
22 Measurement Accuracy % 1% of Span 81 Flushing Ring Material N/A
23 Scale Graduation Gen Note 2.9 82
24 Dial / Pointer Colour White background
Black
with Black markings
83
25 Adjustable Red Line N/A 84
26 Overrange Protection Gen Note 2.7 85
27 Blow Out Protection Gen Note 2.5 86
28 Gauge Fill Fluid N/A / Gen Note 2.10 87
29 Filling Plug N/A 88
30 Syphon N/A 89 SPECIAL REQUIREMENTS :
31 Pulsation Dampner / Snubber N/A 90 NACE Requirements N/A
32 Pulsation Dampner Type N/A 91 Certification Authority N/A
33 Pulsation Dampner Material N/A 92 Certification Approval No. N/A
34 Pulsation Dampner Process Connection N/A 93 Material Certificate Gen Note 2.11
35 Pulsation Dampner Gauge Connection N/A 94 Test Requirements Gen Note 2.12 & 2.13
36 Gauge Saver N/A 95 Special Requirements for Service N/A
37 IP Rating IP 67 96 Fire Safe Design N/A
38 PROCESS DATA : 97 Paint Finish Gen Note 2.14
39 Fluid Name Instrument Air 98 Weight Kg 0.5
40 Fluid State / Phase Gas/Vapor Single phase 99
41 Type Pressure 100
42 Operating Conditions Min Norm Max 101
43 Pressure psig 68.02 109.9 125. 102
44 Temperature °F 131 131 131 103
45 Vibration 104
46 Pulsation 105
47 Corrosive No 106 NON-VENDOR RELATED INFO :
48 Toxic Agents No 107 Tracing Temperature N/A
49 Design Pressure Min/Max psig 150 108 MESC Code N/A
50 Design Temperature Min/Max °F -3 350 109
51 110
52 PURCHASE DATA : 111 REMARKS :
53 Req No. P6012MAB.000.10.30.016 112
54 Manufacturer GENERAL INSTRUMENTS 113
55 Model Number SFBSPG-V 114
56 Supplier GENERAL INSTRUMENTS 115
57 Serial Number 4 116
58 Purchase Order No. 2025JV0J10314 117
59 Item Number 1050 118
A3 YP RB KRM 3/31/2017 Re-Issued for Design INSTRUMENT SPECIFICATION KUWAIT NATIONAL
A2 JN JC MDD 5/18/2016 Re-Issued for Design PRESSURE GAUGE
PETROLEUM CO. (KSC)
A1 YP JC MDD 6/16/2015 Issued for Design SHUAIBA REFINERY
O1 DS JC MDD 4/29/2015 Issued for comment Sheet 1 of 1
No. By Chk App Date Revision Spec: 611 Doc No: P6003SHU-129-30-PG-1504 Rev.:A3
MAB_611.psr Rev 3 Pressure Gauge Specification Print Date: 3/31/2017
INSTRUMENT SPECIFICATION SHEETS - PRESSURE GAUGES
Units Units
1 GENERAL : 60 GENERAL :
2 Tag No. 129-PG -1505 61 Plant SHU
3 Service ME129101B OUTL 62 Unit 129-01 UTILITY AREA
4 Line No. IA-129-1021-11001B-2"-N 63 Area Classification IEC Zone 1 IIC T3
5 Pipe Material CS (ASTM A106-B) 64 Location INLINE
6 Equipment N/A 65 Design Code --
7 PEFS P6003SHU-129-08-4-J102 66
8 GAUGE / SENSING ELEMENT : 67 DIAPHRAGM SEALS :
9 Measuring Method / Type Mfr Std 68 Seal Type N/A
10 Element Type Bourdon tube 69 Process Connection N/A
11 Element Material SS 316 70 Diaphragm Material N/A
12 Case Type / Style Gen Note 2.5 & 2.6 71 Flange: Size Rating Facing N/A N/A N/A
13 Case Material SS 316 72 Upper Flange Material N/A
14 Bezel Ring Material SS 316 73 Lower Flange Material N/A
15 Window Material Non splintering glass 74 Bolting N/A
16 Case Nom. Diameter 100 mm 75 Capillary Length m N/A
17 Mounting Direct 76 Capillary Material N/A
18 Process Connection Size Gen Note 2.4 77 Capillary Armouring N/A
19 Process Connection Location Bottom 78 Seal Fill Fluid N/A
20 Process Connection Material SS 316 79 Gauge Connection N/A
21 Instrument Range psig 0 - 150 80 Flushing Ring Connection N/A
22 Measurement Accuracy % 1% of Span 81 Flushing Ring Material N/A
23 Scale Graduation Gen Note 2.9 82
24 Dial / Pointer Colour White background
Black
with Black markings
83
25 Adjustable Red Line N/A 84
26 Overrange Protection Gen Note 2.7 85
27 Blow Out Protection Gen Note 2.5 86
28 Gauge Fill Fluid N/A / Gen Note 2.10 87
29 Filling Plug N/A 88
30 Syphon N/A 89 SPECIAL REQUIREMENTS :
31 Pulsation Dampner / Snubber N/A 90 NACE Requirements N/A
32 Pulsation Dampner Type N/A 91 Certification Authority N/A
33 Pulsation Dampner Material N/A 92 Certification Approval No. N/A
34 Pulsation Dampner Process Connection N/A 93 Material Certificate Gen Note 2.11
35 Pulsation Dampner Gauge Connection N/A 94 Test Requirements Gen Note 2.12 & 2.13
36 Gauge Saver N/A 95 Special Requirements for Service N/A
37 IP Rating IP 67 96 Fire Safe Design N/A
38 PROCESS DATA : 97 Paint Finish Gen Note 2.14
39 Fluid Name Instrument Air 98 Weight Kg 0.5
40 Fluid State / Phase Gas/Vapor Single phase 99
41 Type Pressure 100
42 Operating Conditions Min Norm Max 101
43 Pressure psig 68.02 109.9 125. 102
44 Temperature °F 131 131 131 103
45 Vibration 104
46 Pulsation 105
47 Corrosive No 106 NON-VENDOR RELATED INFO :
48 Toxic Agents No 107 Tracing Temperature N/A
49 Design Pressure Min/Max psig 150 108 MESC Code N/A
50 Design Temperature Min/Max °F -3 350 109
51 110
52 PURCHASE DATA : 111 REMARKS :
53 Req No. P6012MAB.000.10.30.016 112
54 Manufacturer GENERAL INSTRUMENTS 113
55 Model Number SFBSPG-V 114
56 Supplier GENERAL INSTRUMENTS 115
57 Serial Number 5 116
58 Purchase Order No. 2025JV0J10314 117
59 Item Number 1051 118
A3 YP RB KRM 3/31/2017 Re-Issued for Design INSTRUMENT SPECIFICATION KUWAIT NATIONAL
A2 JN JC MDD 5/18/2016 Re-Issued for Design PRESSURE GAUGE
PETROLEUM CO. (KSC)
A1 YP JC MDD 6/16/2015 Issued for Design SHUAIBA REFINERY
O1 DS JC MDD 4/29/2015 Issued for comment Sheet 1 of 1
No. By Chk App Date Revision Spec: 611 Doc No: P6003SHU-129-30-PG-1505 Rev.:A3
MAB_611.psr Rev 3 Pressure Gauge Specification Print Date: 3/31/2017