Professional Documents
Culture Documents
Uses
Mixing
Adhesive compound is a specially formulated epoxy resin
adhesive for bonding prefabricated elements such as The content of hardener should be added to the base can
bridge segments, and general purpose bonding adhesive and mixed for minimum 3 minutes with a paddle and slow
for concrete substrate speed heavy duty drill, ensuring the side are scraped
Advantages down. A uniform grey colour should be obtained.
Wear suitable protective clothing, gloves, and eye/face Separate SDS is available on request.
protection. Barrier creams provide additional skin
protection. If there is accidental skin contact, remove Additional Information
immediately with a resin removing cream, followed by Adhesive compound is part of wide range of repair
soap and water. mortars, sealing components and protective coating
Do not use solvent. In case contact with eyes, rinse products specially designed and manufactured by
immediately with plenty of clean water and seek FOSROC for the construction industry.
medical advised. If swallowed seek medical attention
immediately. Do not induce vomiting.
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
PT.FOSROC recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous control
over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or
Indonesia not in accordance with any advice, specification, recommendation of information given by it.