You are on page 1of 3

Republic of the Philippines

Department of Education
SCHOOLS DIVISION OF OCCIDENTAL MINDORO
Sablayan National Comprehensive High School

SECOND QUARTER- SUMMATIVE 2

CARPENTRY
Grade 8

Name: ________________________________ Date: _____________ Score:________________


Year and Section: _______________________ Parents Signature:_____________

I - MULTIPLE CHOICE: Read each item carefully and circle the correct answer from the choices
given.

1. Which tool is used for laying out angles?


A. caliper B. compass C. divider D. protractor
2. Which tool is used for measuring long pieces of stock.
A. meter stick B. pull push rule C. ruler D. zigzag rule
3. What tool is used for dividing distances?
A. caliper B. compass C. divider D. Protractor
4. What would happen if you apply grease on a sealed bearing?
A. to avoid stock up C. to avoid wearing of the graduations
B. to avoid coiled spring damage D. to be cleaned
5. Why do you think is important to oil the movable parts of the measuring tools such as zigzag rules,
calipers, dividers and compass?
A. To avoid damage of tools C. To avoid stock up
B. To avoid rusting D. To avoid wearing off the graduations
6. What are the 6 faces of a lumber?
A. 2 ends, 2 edges and 2 surfaces C. 1 end, 3 edges and 2 surfaces
B. 2 ends, 2 tops and 2 surfaces D. 2 ends, 1 edge and 3 surfaces
7. How many inches are there in 9 feet?
A. 88 B. 98 C. 108 D. 118
8. Convert 15 inches into centimeter.
A. 28.10 B. 30.10 C. 35.10 D. 38.10
9. What is ¾ in decimals?
A. 0.25 B. 0.50 C. 0.75 D. 80
10. Convert 9/5 in decimal.
A. 1.2 B. 1.5 C. 1.7 D. 1.8
11. Compute the board foot of lumber whose dimension is 3”x6”x12”.
A. 18 bd.ft. B. 20 bd.ft. C. 25 bd.ft. D. 28bd.ft
12. Compute the number of board foot of lumber whose dimension is 2”x12”x 8”.
A. 15 bd.ft B. 16 bd.ft. C. 17 bd. ft. D. 18 bd ft
13. Which line is used to show the sizes of the object?
A. center line B. construction line C. dimension line D. long break line
14. A heavy line draws freehand for same purpose as long break.
A. Borderline B. Centerline C. Construction line D. Long Break Line
15. A very light line used to “block” in an object.
A. Borderline B. Centerline C. Construction Line D. Invisible line
16. A light line used as axis of symmetry.
A. Centerline B. Dimension Line C. Long break line D. Visible line
17. A medium line used to show edges and contours visible to the eye.
A. Construction line B. Dimension line C. Long break line D. Visible line.
18. How would you modify a borderline in the alphabet of lines?
A. It has a heavy solid line used to frame in the drawing
B. It has a heavy line draws freehand
C. It has a medium line used to show edges and contours
D. It has a light line used to show the sizes of the object.
19. The following are the dimensions and specification of a center table, EXCEPT________________.
A. Legs must be tapered C. All wood used must be tanguile
B. All joints must be filled with glue D. All dimensions must be in mete
20. What are the 4 different components of a center table?
A. legs, long rails, short rails and top C. legs, joints, wood and top
B. legs, edges, ends and top D. glue, meter stick, plywood and wood
21. All dimensions must be in ______________
A. meters B. millimeters C, milliliters D. centimeters

II- DRAWING: 9 pts

A. Give the isometric view of a given object ( 3 pts)

1. Given:

ORTHOGRAHIC VIEW

2. Give the orthographic view of given object (3 pts )


Given:

ISOMETRIC VIEW

3. Give the isometric view of a given object. ( pts)


Given:

ORTHOGRAHIC VIEW

Corroborated by:

Ma’am Myla
Ma’am Rocelie
Ma’am Frelyn
Ma’am Cristine
Ma’am Leinor
Sir Marlon

You might also like