Professional Documents
Culture Documents
1.0 Scope:
This procedure specifies to carry out visual inspection on external, and If possible
internal surface of the pipes following the standard ASME SEC-V.
2.0 Reference:
ASME SEC–V article-9 API 5L
3.0 Tools:
Measuring tape, Mirror, Magnifier, Inside and out side caliper gauge.
5.2 Measure the length, Internal Diameter (I.D.) and Outside Diameter (O.D.) to cross
check with the specification and evaluate ovality if any.
5.3 Check the pipe edges for any sign of cracks or sign of lamination and angle of bevel
in case of beveled edges.
5.4 As far as accessible, inspect internally for sign of corrosion & pitting.
5.5 In welded pipes, inspect the weld for any surface defects.
5.6 Check the mill certificate and hydro-test certificates as per the requirement of
relevant standard / specification.
5.7 Check for the identification marking as per the requirements of the specifications.