Professional Documents
Culture Documents
Dome Internal Stiffening (160-27)
Dome Internal Stiffening (160-27)
T.R.:
1. Visual inspection of weld seams to be done as per HW0620099, Classification group
CS/CK.
2. Non Destructive Examination of welds seams as per HW 0850199, part-10.
3. All weld joints to be coated with steam washable paint.
4. Misalignment of pipe centerline not to exceed 5 mm.
5. Stiffening pipe item no 2 & 4 include 50 mm extra length for site adjustment.
6. Site erection of dome internal stiffening & L.P. Heater supports assembly should be
done simultaneously.
7. Stiffening pipes item no 12 to 20 include 20 mm extra length for site adjustment. Edge
preparation at their plain end is to be made at site as per detail-IV.
8. E denotes erection welding.
Slab
VspL1 UdwLIb UdwUIb VspPL VpSm
2
CNeckL Slab
VspL 6 TeSpD1 PdTk
2 2
9. Stiffening Pipe (316027A01P09):
CNeckW Slab
VspL7 WbSpD PdTk
2 2
CneckL
FeMspD LdwMIb LdwUEL tan LdwFang
2
FeHspL FeMspD TeSpD1 TeSpD 2 PdTk Cos 1 Ldwfang Slab FeHspInc
2
2
SpSm
FeHspL 2 FeLspD TeSpD1 TeSpD 2 PdTk Cos 1 Ldwfang Slab FeHspInc
2
2
SpSm
CneckL
Re MspD LdwMIb LdwUEL tan LdwRang
2
Re HspL3 Re MspD TeSpD1 TeSpD 2 PdTk Cos 1 LdwRang Slab Re HspInc
2
2
SpSM
Re HspL 4 Re LspD TeSpD1 TeSpD 2 PdTk Cos 1 LdwRang Slab Re HspInc
2
2
SpSM
CneckW
TeUspD LdwUIb LdwUEL tan LdwTang
2
TeHspL1 TeUspD WbSpD PdTk Cos 1 LdwTang Slab TeHspInc
2
2
SpSM
TeHspL 2 TeMspD WbSpD PdTk Cos 1 LdwTang Slab TeHspInc
2
2
SpSM
FeHspL1 FeUspD TeSpD1 TeSpD 2 PdTk Cos 1 Ldwfang Slab FeHspInc
2
2
Sp Sm
PAHt= VsPL5+SpPLTk
T.R.:
1. Visual inspection of weld seams to be done as per HW0620099, Classification group
CS/CK.
2. Non Destructive Examination of welds seams as per HW 0850199, part-10.
3. Painting is to be done as per HE77001.
Slab
VsPL5 LdwMIb LdwUIb SpPLTk SpSh
2
T.R.:
5. Visual inspection of weld seams to be done as per HW0620099, Classification group
CS/CK.
6. Non Destructive Examination of welds seams as per HW 0850199, part-10.
7. Painting is to be done as per HE77001.
SpLHc 2 SpSh
SpHD Slab