This document provides information on protection and sensor selection for Schneider Electric SM6 equipment. It lists various protection types and corresponding protection units that can be used. It also includes details on current sensors for the VIP 35 and VIP 300LL and Sepam series 10 that are compatible for use with SM6-24, including their dimensions, weight, transformation ratios, and precision class.
This document provides information on protection and sensor selection for Schneider Electric SM6 equipment. It lists various protection types and corresponding protection units that can be used. It also includes details on current sensors for the VIP 35 and VIP 300LL and Sepam series 10 that are compatible for use with SM6-24, including their dimensions, weight, transformation ratios, and precision class.
This document provides information on protection and sensor selection for Schneider Electric SM6 equipment. It lists various protection types and corresponding protection units that can be used. It also includes details on current sensors for the VIP 35 and VIP 300LL and Sepam series 10 that are compatible for use with SM6-24, including their dimensions, weight, transformation ratios, and precision class.
General characteristics Protection and sensor selection table
General common selection of protection
units Protection type Code Protection units Sepam VIP series 10 series 20 series 40 series 60 series 80 35 300 Three-phase overcurrent 50 - 51 b b b b b b (2) b (1) Zero-sequence overcurrent 50N - 51N b b b b b b (3) b (1) Directional zero-sequence current 67N b b b Undervoltage 27 b b b Overvoltage 59 b b b Thermal image 49 b b b b b Zero-sequence overvoltage 59N b b b Negative sequence overcurrent 46 b b b b Long start-up and rotor blocking 51LR b b b b Maximum number of start-ups 66 b b b b Single-phase undercurrent 37 b b b b Communication b b b b b (1) DT, EI, SI, VI and RI trip curves. (2) Inverse curve suited to transformer protection. (3) DT trip curve.
Current sensor for VIP 35 and VIP 300LL
and Sepam series 10 for SM6-24 Type Dimensions (mm) Weight Ratio of Class of precision VIP 35 VIP Sepam 10 (kg) transformation 300LL External Internal Thickness Ø Ø (without fastening) CRa 143.5 81 37.5 2.18 1/200 ± 2% from 10 A to 100 A On load 5.7 Ω (cal. x 1) b b ± 1% from 100 A to 1600 A ± 1% from 10 A to 10 kA On load 0.67 Ω (cal. x 4) CRb 143.5 81 37.5 1.26 1/1250 ± 1% from 10 A to 11 kA On load 5.7 Ω (cal. x 1) b b ± 1 % from 10 A to 25 kA On load 0.67 Ω (cal. x 4) CRc 143.5 81 37.5 2 S1-S2: 1/200 S1-S2: On load 0.6 Ω b ± 5% from 10 A to 80 A ± 2.5 % from 80 A to 600 A S1-S3: 1/500 S1-S3: ± 2% from 20 A to 2200 A DE58402