Professional Documents
Culture Documents
DIRECTIONS: Read the following statement carefully. Blackened the circle of the correct answer.
A B C D A B C D A B C D A B C D A B C D A B C D
1. 6. 11 16. 21. 26.
2. 7. 12. 17. 22. 27.
3. 8. 13. 18. 23. 28.
4. 9. 14. 19. 24. 29.
5. 10. 15. 20. 25. 30.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
A. Anti-static mat C. Philips head screwdriver
B. Hex driver D. Wire cutter
2. Which tool is used to loosen or tighten cross-head screws?
A. Anti-static mat C. Philips head screwdriver
B. Hex driver D. Wire cutter
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screw?
A. Anti-static mat C. Philips head screwdriver
B. Hex driver D. Wire cutter
4. Which tool is used to strip and cut wires?
A. Anti-static mat C. Philips head screwdriver
B. Hex driver D. Wire cutter
5. Which tool is used to retrieve parts from location that are too small for your hand to fit?
A. Cable ties C. Lint-free cloth
B. Flat head screwdriver D. Part retriever
6. Which tool is used to clean different computer components without scratching or leaving debris?
A. Cable ties C. Lint-free cloth
B. Flat head screwdriver D. Part retriever
7. Which is used to bundle cables neatly inside and outside of a computer?
A. Cable ties C. Lint-free cloth
B. Flat head screwdriver D. Part retriever
8. Which tool is used to loosen or tighten slotted screws?
A. Cable ties C. Lint-free cloth
B. Flat head screwdriver D. Part retriever
9. Which tool is used to loosen or tighten screws that have a star-like depression on the top,
a feature that is mainly found on laptop?
A. Anti-static mat C. Torx screw driver
B. Philips head screwdriver D. Wire cutter
10. Which tool is used to blow away dust and debris from different computer parts without touching the components?
A. Anti-static mat C. Compressed air
B. Philips head screwdriver D. Wire cutter
11. What material used to fasten or fix cables neatly?
A. Cable ties C. Rubber band
B. Excess wire D. All of the above
12. A Phillips screwdriver is an example of:
A. Cutting tool C. Driving tool
B. Gripping tool D. Striking tool
13. What document that can serve as reference of needed tools and equipment.
A. Order slip C. Requisition slip
B. Receipt slip D. Inspection order slip
14. It is a document that used to request for needed tools and materials for a particular job.
A. Order slip C. Requisition slip
B. Receipt slip D. Inspection order slip
15. What is the common defect of a hammer?
A. Dull blade C. Dull tip
B. Dull cutting edges D. Poorly secured handle
16. What is the common defect of a blade cutter?
A. Dull blade C. Dull tip
B. Dull cutting edges D. Poorly secured handle
____________________________
Parent’s Signature
TAYABAS WESTERN ACADEMY
Founded 1928 SCORE:
Recognized by the Government
Candelaria, Quezon
______________________________________________________________________________
Prepared by:
Mrs. Mira Godinez Gonzales
____________________________
Parent’s Signature