Professional Documents
Culture Documents
CT
Service Instruction CT087/05/S
Service Pack 1 for VB28B
Remark: n.a.
Remark: n.a.
© Siemens AG 2005
Chg. Ref. No.: 166473 The reproduction, transmission or use
of this document or its contents is not
Name: B. Lapunik permitted without express written
authority. Offenders will be liable for
Dept.: CS PS CT damages. All rights, including rights
created by patent grant or registration
of a utility model _or_ design,_are_
reserved.
This document corresponds to the version/revision level effective at the time of system
delivery. Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer 0
An error may occur where the LungCare program does not store the marks for measured
nodules. This Service Pack 1 provides a software patch to correct this issue.
Prerequisites 0
n.a.
Systems/Products Affected 0
Affected system numbers may be subject to change, the UI- data published in the Intranet
(Udate Handling Tool) always reflect the current status. UI- Paper versions are not
updated when affected serial numbers change.
Ordering Information 0
The following update kit has to be ordered from CSML (SAP Distribution Channel, factory
2050) :
Update-Kit_VB28B_IES_SP1 10179707 Update Kit Material Number)
Return of Parts 0
n.a.
Work Steps 0
Check Installation 0
Final Check 0
Perform a scan in customer mode and expose the film to ensure the camera is functioning
properly.
• Start the service software and select the Backup & Restore function in the main menu.
• Insert the backup CD-R for the Wizard
• From Command, select Backup.
• From Drives, select the corresponding drive.
• From Packages, select CT-Settings-IES and click Go.
➪ BackupRestore Running ...
Customer Information 0
n.a.
• Updates that have already been completed prior to publication of this UI must also be
reported.The modification reply report has to be prepared by authorized personnel using
an application on the intranet.)
Completion Protocol 0
Remark: ....................................................................................................
....................................................................................................
NOTE After completing the update, make a copy of this page, fill it out and file
it in the corresponding System Binder/User Handbook.