You are on page 1of 3

STORES/DMRC Tender Document For Tender No : DMRCAPL24078 Due Date/Time: 17/03/2017 15:00

STORES/DMRC, for & on behalf of The President of India, Invites electronic tenders for the following items.

Note :
Indian firms are allowed to make payments against this tender towards tender document cost and earnest money only through online payment modes available on IREPS portal like net banking, debit card,
credit card etc. Manual payments by Indian firms through Demand draft, Banker's cheque, Deposit receipts, Guarantee bonds etc. are not allowed.

Tender No : DMRCAPL24078 Evaluation Criteria : Itemwise


Tender Doc. Cost (INR) : 0.00 Earnest Money (INR): 0.00
Date/time of uploading : 02/03/2017 16:28 Tender Closing Date Time : 17/03/2017 15:00
Pre-Bid Query Date Time: Not Applicable Bidding System : Single Bid System
Validity of Offer(Days) : 60 Delivery Schedule : Within 4-6 weeks from the date of issue of P.O.
Inspection Agency: CONSIGNEE

Tender Title : Procurement of GIS Panel Spares of Siemens make for Airport line, DMRC.
Payment Terms : 100 percent payment after complete delivery and acceptance of supplied material through e-payment.
Instructions/Remarks: NIL

A. Item Details

S.No. PLNO(Item Code) Item Description Quantity Unit Consignee

1 01 OPERATING SOLENOID, 3AY1510-5E, DC 100-124V, AC 100-125V50/60HZ, USED AS 2.00 Numbers JE/TR-STORE/APL


CLOSING SOLENOID OR 1ST SHUNT RELEASE. Siemens make, 33kV, 8DA10 and
25kV, 8DA11 model Closing and Tripping coil.

2 02 POSITION SWITCH [WITHE] 3AX4206-0A. Siemens make, 33kV, 8DA10 and 25kV, 8DA11 10.00 Numbers JE/TR-STORE/APL
model CB, Disconnector and Earth position Switch.

3 03 AUXILIARY SWITCH 3SV9274-2AA0 12NO-12NC. For Siemens make, 33kV, 8DA10 and 1.00 Numbers JE/TR-STORE/APL
25kV, 8DA11 model GIS panel.

4 04 MOTOR, 3AY1511-3E, AC/DC 110V-127V, WITH INTEGR VARISTOR. For Siemens 1.00 Numbers JE/TR-STORE/APL
make, 33kV, 8DA10 and 25kV, 8DA11 model GIS panel.

5 05 DUMMY CABLE, PLUG Size 2, Um 42kV, outdoor use. For Siemens make, 33kV, 8DA10 2.00 Numbers JE/TR-STORE/APL
model GIS panel.

6 06 Cable housing for 8DA10 GIS panel with internal insulated cone, PANEL CONNECTION 1 x 1.00 Numbers JE/TR-STORE/APL
plug-in size 2, pre-mounted with contact bolt. With screwing material and O ring. For
Siemens Make 8DA10 model GIS panel.

7 07 OPERATING MECHANISM for three position switch Ql. Pre-mounted with wiring Hand 1.00 Numbers JE/TR-STORE/APL
operated Without electromechanical interlocking. For Siemens make 33kV, 8DA10 model
GIS panel.

8 08 DUMMY CABLE PLUG Size 3 Um 52Kv outdoor use. For Siemens make, 25kV, 8DA11 1.00 Numbers JE/TR-STORE/APL
model GIS panel.

This is digitally signed document

Page 1 of 3 Run DateTime: 02/03/2017 16:29:38


STORES/DMRC Tender Document For Tender No : DMRCAPL24078 Due Date/Time: 17/03/2017 15:00

9 09 CONTACT MANOMETER 120 kPa 2 contacts with Adapter system plug 4-pole. For 1.00 Numbers JE/TR-STORE/APL
Siemens make, 25kV, 8DA11 model GIS panel.
10 10 INDOOR WINDOW TYPE CURRENT TRANSFORMER Type: 4MC4_40 Drawing: 1.00 Numbers JE/TR-STORE/APL
MBS3.4023 High: 50 mm Insulation level: 0,72/3/- Kv Ith:25kA/3s 50Hz, IEC Ratio:
1250//1A Core 1: 2,5VA / cl. 5P20/1 IN x 1,5 With secondary wires 3,6 m / 4 mm2 With
routine test reports. For Siemens make, 25kV, 8DA11 model GIS Panel.

11 11 INDOOR VOLTAGE TRANSFORMER Type: 4MT76 Drawing: MBS3.5748 Metal-clad, 1- 1.00 Numbers JE/TR-STORE/APL
pole,50Hz, IEC IL: 29/95/200kV add.-label suitable for IL:52/95/200Kv Ratio: 25.000 V :
110V 1st winding: 10VA / cl. 0,5/3P EN 50152-3-3 with routine test report English. For
Siemens make, 25kV, 8DA11 model GIS Panel.

12 12 Cable housing for 8DA11 GIS panel with internal cone,PANEL CONNECTION 2x plug-in 1.00 Numbers JE/TR-STORE/APL
size 3 plus 1x plug-in size 2, premounted with contact bolt. O ring and With fixing material.
For one phase. For Siemens make, 25kV, 8DA11 model GIS Panel.

13 13 OPERATING MECHANISM for three position switch Q1. Pre-mounted with wiring Motor 1.00 Numbers JE/TR-STORE/APL
operated 110V DC without electromechanical interlocking For one panel. For Siemens
make, 25kV, 8DA11 model GIS Panel.

B. Eligibility Criteria

S.No. Description

1 Material should be as per given specifications.

C. Special Conditions and Checklist for bidders

S.No. Description

1 Warranty terms should be clearly mentioned in the offer. Minimum 18 months warranty from the date of supply OR 12 months warranty from the date of installation /commissioning, whichever
is earlier is required.

2 The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be
ignored. [Denial of this condition not recommended]

3 Purchaser shall be entitled to increase / decrease the order quantity by 25 percent anytime during the currency of the contract such that the contractor has reasonable time/notice for executing
such increase/decrease. The increase in quantity with respect to the tender quantity can be done even at the time of ordering and the tenderer shall be bound to accept the quantity so ordered
on the basis of his original offer. The purchaser shall be entitled to exercise plus 25 percent option in one or more than one installment as long as the total variation in quantity does not exceed
the limit of 25 percent of ordered quantity. Any increase of quantity under option clause after expiry of delivery period can be considered with the consent of the firm/contractor.

4 Material is to be supplied by the firm at Airport line, Dwarka Depot.

5 Offers from the firms, which do not have a valid CST/LST/TIN/ECC No. will not be entertained.

6 The purchaser reserves the right to reject or accept any offer in whole or part without any assigning any reason.

This is digitally signed document

Page 2 of 3 Run DateTime: 02/03/2017 16:29:38


STORES/DMRC Tender Document For Tender No : DMRCAPL24078 Due Date/Time: 17/03/2017 15:00

D. Documents attached with the tender

Corrigenda

Note: Details of corrigendum are shown below. However, data/details in NIT/Tender document is updated duly incorporating all corrigenda issued.

S.No. Subject Description Corrigendum Date/Time

No Corrigendum(s) to display

Note: This tender is governed by Term and Conditions specified and attached document with the tender by Zonal Railways / Production Units.

- - - - - - - - - - End of the Report - - - - - - - - - -

This is digitally signed document

Page 3 of 3 Run DateTime: 02/03/2017 16:29:38

You might also like