Professional Documents
Culture Documents
Session Plan
Sector : Garment
Qualification Title : Dressmaking NC II
Unit of Competency : Draft and Cut Pattern of Casual Apparel
Module Title : Drafting and Cutting Pattern of Casual Apparel
Learning Outcomes:
LO1. Plan garment design
LO2. Take clients body measurement
LO3. Draft basic/block pattern
LO4. Manipulate pattern
LO5. Cut final pattern
A. Introduction:
This module covers the knowledge, skills and attitude required in planning garment, taking client’s body
measurement, drafting basic/block pattern, manipulating and cutting final pattern. This module design helps
obtain these and achieve all the units prescribed for these qualifications.
B. Learning Activities
LO1. Plan garment design
1.1 Customer’s job requirements are determined in accordance with company’s practice
1.2 Garment design is prepared in accordance with the client’s requirement
1.3 Design and fabric are discussed and selected according to client’s specifications
1.4 Special needs of the client are incorporated into the design based on procedures
Learning Content Methods Presentation Practice Feedback Resources Time
1. Garment design Self-study Read Answer Compare -Information 1 hour
Information Self-Check answer to Sheet No. 1.1-1
Sheet 1.1-1 on No. 1.1-1 Answer Key -Self-Check
Garment design No. 1.1-1 -Answer Key
Active Lecture Listen and -Laptop 1 hour
TESDA - NAVOTAAS TRAINING INSTITUTE (TNTI)
C3 Road, Corner Virgo Drive, Brgy. NBBS, Kaunlaran, Navotas City
Tel No.: (02) 7217-6132 Mobile No.: +639178414164
Email: tnti@tesda.gov.ph
and
incorporatin
g
Customer’s
Requirment
s
LO2. Take Client’s Body Measurement
2.1 Measuring tools are prepared in accordance with job requirements
2.2 Body measurements are taken based on procedures
2.3 Body measurements of client are taken in sequence according to job requirements and standard body measurement
2.4 Body measurements are recorded in line with company requirements/ practice
Learning Content Methods Presentation Practice Feedback Resources Time
1. English system of Self-study Read Answer Compare -Information 1 hour
measurement Information Self-Check answer to Sheet No. 1.2-1
Sheet 1.2-1; on No. 1.2-1 Answer Key -Answer Key
English system No. 1.2-1
of measurement
Active Lecture Listen and Answer Compare -Information 2 hours
participate to questions answer to Sheet No. 1.2-1
active lecture on from the Answer Key -Power point
English system learning No. 1.2-1 presentation
of measurement facilitator & -Lecture on
trainees English system
of measurement
2. Metric system of Self-study Read Answer Compare -Information 1 hour
measurement information Self-Check answer to Sheet No. 1.2-2
sheet 1.2-2 No. 1.2-2 Answer Key -Power point
No. 1.2-2 presentation
TESDA - NAVOTAAS TRAINING INSTITUTE (TNTI)
C3 Road, Corner Virgo Drive, Brgy. NBBS, Kaunlaran, Navotas City
Tel No.: (02) 7217-6132 Mobile No.: +639178414164
Email: tnti@tesda.gov.ph
-Lecture on
Metric system
of measurement
Active Lecture Listen and Answer Compare -Information 2 hours
participate to questions answer to Sheet No. 1.2-2
active lecture on from the Answer Key -Power point
Metric system of learning No. 1.2-2 presentation
measurement facilitator & -Lecture on
trainees Metric system
of measurement
3. Linear measurement Self-Study Read Answer Compare -Information 1 hour
information Self-Check answer to Sheet No. 1.2-3
1 Measuring tools in taking sheet 1.2-3 No. 1.2-3 Answer Key -Self-Check
body measurement No. 1.2-3 -Answer Key
Active Lecture Listen and Answer Compare -Information 2 hours
participate to questions answer to Sheet No. 1.2-3
active lecture on from the Answer Key -Power point
Linear learning No. 1.2-3 presentation &
measurement facilitator & lecture on
trainees Linear
measurement
4. Procedure and sequence in Self-study Read Answer Compare -Information 1 hour
taking body measurements information Self-Check answer to Sheet No. 1.2-4
sheet 1.2-4 Body No. 1.2-4 Answer Key -Self-check
2 Body Measurement Measurement No. 1.2-4 -Answer Key
Active Lecture Listen and Answer Model -Power point 2 hours
participate to questions answer will presentation
active lecture on from the be given by -Lecture on
TESDA - NAVOTAAS TRAINING INSTITUTE (TNTI)
C3 Road, Corner Virgo Drive, Brgy. NBBS, Kaunlaran, Navotas City
Tel No.: (02) 7217-6132 Mobile No.: +639178414164
Email: tnti@tesda.gov.ph
3. Procedure in drafting Self-Study Read Information Answer Self- Compare -Information Sheet 1 hour
basic/ block pattern Sheet. 1.3-2 on Check No. 1.3-2 answer to No. 1.3-2
Basic and Block Answer Key -Self-Check
Pattern No. 1.3-2 -Answer Key
Video Showing Pay attention to Answer Guide Compare your -White screen 2 hours
the video and take questions answer to -Laptop
down notes. Model answer -Projector
-Video
Presentation about
Procedure in
drafting basic/
block pattern using
appropriate
equipment &
customer’s
specifications
Demonstration Pay attention to Perform Task -Evaluate -Job sheet 2 hours
the learning Sheet No. 1.3-2 Performance -Performance
facilitator while on drafting Criteria Criteria Checklist
she demonstrates basic/ block Checklist -Tape
the Procedure in pattern -Check Measurement, L-
drafting basic/ Individual square, hip curve,
block pattern works using ruler, pencil,
Performance pattern paper and
Criteria measurement of the
Checklist Model
Discussion Listen to the Answer oral Model answer -Laptop 2 hours
TESDA - NAVOTAAS TRAINING INSTITUTE (TNTI)
C3 Road, Corner Virgo Drive, Brgy. NBBS, Kaunlaran, Navotas City
Tel No.: (02) 7217-6132 Mobile No.: +639178414164
Email: tnti@tesda.gov.ph
2. Procedure in Pattern Self-study Read Information Answer Self- Compare -Information sheet 1 hour
Making Sheet 1.4-2 on Check No. 1.4-2 answer to -Self-Check
Procedure in Answer Key -Answer Key
Pattern Making No. 1.4-2
Active Lecture Listen to the Answer Self- Compare -Laptop 2 hours
learning Check No. 1.4-2 answer to -Power point
facilitator while Answer Key presentation on
she discusses the No. 1.4-2 Procedure in
topic on Pattern Making
Procedure in -Self-Check No.
Pattern Making 1.4-2
-Answer Key