force during installation Correct Way to Install: Incorrect Way to Install: Rotate filter clockwise until X Do NOT apply excessive pin engagement downward force (the filter cap until pin will drop down engagement ~1/4”)
How to Properly Install Your FK13850NN Fuel Kit:
1. Snap the cartridge into the lid and place
into the housing. 2. Rotate clockwise until you feel the filter pin drop down (~1/4”) into the drain port hole. Filter pin
3. Do NOT apply a downward force to engage the
threads UNTIL you feel the filter pin drop down into the drain port hole. 4. Tighten lid to torque specification (55 +5 Nm.) Scan to view our service video.