Professional Documents
Culture Documents
Rsa A4 PR Wi 03 (Painting) Rev 0
Rsa A4 PR Wi 03 (Painting) Rev 0
4 PAINTING
Area Description Documents ControlSAPDrawingsroutesheetscheckshee
Equipment is worn
- Environmetal temperature
- Steel temperature
- Relative Humidity
ATTENTION:Than the steel temperature and relatie humidity must meet the customer specification.
Preparation Process for With the control sheet check the procedure that needs to be applied.
4
Check environmental conditions that will affect application
Painting Check if there are any factor that prevents further treatment/application
5 Cleaning section Scraping 100% of section using scraper,sanding flanges and areas who needed between layers to ensure
Dust test required if applicable as this differs from Client to Client so only if required.
6 Plugging and Covering of Please ensure threaded areas of weldable internals are plugged
areas
(if applicable)
* Call the supervisor for checking the Visual and DFT of the coat,and dry on the time specified on the
customer specification.
of sections Check the section according to the DFT specified by the customer
Document No.:
Revision:
Date:
Page:
PPE'S
SAPDrawingsroutesheetschecksheets, PaintingGloves,boots, overallEyeProtectiveprotection,costume,,
Tools Safety
Spatula,Termometersmachine,Grinding
Tiempo:
Diagrams / Photos / etc.
tomer specification.
5
between layers to ensure
9 9